It's a thermodynamics question. Calculate the final temperature of the gas after the following operations, which each startwith the same initial arrangement. The thermal capacity of the cylinders is to be ignored.(a) The valve is fully opened and the gas slowly drawn into B by pulling out the piston B;piston A remains stationary.(b) Piston B is fully withdrawn and the valve is opened slightly; the gas is then driven as faras it will go into B by pushing home piston A at such a rate that the pressure in A remainsconstant: the cylinders are in thermal contact. Two thermally insulated cylinders, A and B, of equal volume, both equipped with pistons,are connected by a valve. Initially A has its piston fully withdrawn and contains a perfectmonatomic gas at temperature T, while B has its piston fully inserted, and the valve is closed.

Given information: The initial temperature of system A=T…

Two thermally insulated cylinders, A and B, of equal volume, both equipped with pistons, are connected by a valve. Initially A has its piston fully withdrawn and contains a perfect monatomic gas at temperature T, while B has its piston fully inserted, and the valve is closed.

Two thermally insulated cylinders, A and B, of equal volume, both equipped with pistons, are connected by a valve. Initially A has its piston fully withdrawn and contains a perfect monatomic gas at temperature T, while B has its piston fully inserted, and the valve is closed.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: R(acetylene) = 59.35 ft-lbf/lbm-R Answer: a. b. V = _% mass

A: Given-Information:- Diameter, d = 6 inches = 0.5 ftLength, L = 40 inches = 3.333 ftPressure,P1 =…

Q: Q6. Dealing with two different samples in a thermodynamic experiment, a 1.55 kg sample increases its…

A: Given datamass m = 1.55kgFor first body heat absored Q1 = 40kJT1i = 14.50CT1f = 49.20CSecond body…

Q: The following processes occur in a reversible thermodynamic cycle: 1-2: 0.2 kg heating at constant…

Q: Q12: Which of the following is the extensive property of a thermodynamic system ? O (a) Pressure (b)…

Q: A steam power plant operates essentially under steady state conditions in which steam is at a…

Q: (Thermodynamics)(True or False) The equation TdS=dU+PdV can be applied only to reversible processes

A: TdS= dU + PdV, contains the term like temperature , entropy, internal energy , pressure and volume.…

Q: If state 1 is a saturated vapor. After expansion with an isobaric process, state 2 is: a.…

A: Since you have asked multiple questions in a single request we would be answering only the first…

Q: Steam enters a turbine operating at steady state at 800°F and 450 Ibf/in? and leaves as a saturated…

Q: When U=f(T,v) for an ideal gas if B=1.4 E -5 /K, and if partial derivative of internal energy with…

Q: Entropy is a property Select one: O True O False

A: We have to determine Entropy is property

Q: An insulated, rigid tank whose volume is 0.5 m³ is connected by a valve to a large vessel holding…

Q: Bernoulli's principle is an example of which law of thermodynamics. Explain why?

A: First law of thermodynamics is related to the conservation of energy.

Q: A 60-lb aluminum bar, initially at T₂ = 190°F, is placed in a tank together with 190 lb of liquid…

Q: Two kilograms of nitrogen at 100K, x = 0.5 is heated in a constant pressure process to 300K in a…

Q: Question #2 For the following processes, find the changes in h as appropriate. The initial state…

A: ## Analyzing the Changes in Enthalpy (h)**Understanding the Problem:**We're given various…

Q: When a system undergoes a Isochoric process (P = 5 bar), the change in internal internal is 5 kJ and…

A: Isochoric Process: the process in which the volume of the process is constant throughout the process…

Q: Apply the first law to a constant-volume process.

Q: A 300-lb iron casting, initially at 1050°F, is quenched in a tank filled with 2121 lb of oil,…

A: Solution:

Q: 2. Gaseous nitrogen actuates a Carnot power cycle in which the respective volumes at the four…

A: P-V diagram:

Q: 20-lb aluminum bar, initially at T₂ = 210°F, is placed in a tank together with 190 lb of liquid…

Q: Apply the second law to develop the absolute thermodynamic temperature scale.

A: Consider two reversible heat engines HE1 and HE2 are connected in series as shown in the figure.

Q: A phase change, or transition, occurs when a substance undergoes a change in state on a molecular…

Q: (1.3) Suppose a process increases Gibbs free energy of a system coupled to both a heat bath and…

A: Given : ∆G>0 To find : Explain

Q: Equations of State for a gas; P.v = 0.004 (T + 273) U=U0+1,2 T given in the form. In equations P:…

Q: he following processes occurs in a reversible thermodynamic cycle: 1-2: Reversible polytropic…

A: Given Data:- Expansion index, n2=2 Pressure at state 2, P2=9.6 bar

Q: Demonstrate the procedures for determining thermodynamic properties of pure substances from tables…

A: Property tables help us in finding out the thermodynamics properties of substances. The following…

Q: differential of a thermodynamic property can

A: Statement I:- According to the 2nd law of thermodynamics, dQ=T ds In this thermodynamic system when…

Q: Oxygen gas is compressed in a cylinder from 2.5 bar to 15 bar. The temperature is increased from…

Q: An insulated, rigid tank whose volume is 0.5 m³ is connected by a valve to a large vessel holding…

A: (a) To find: The final temperature of the steam in the tank and the final mass of the steam in tank…

Q: 4. You are told the initial and final states of a system and the associated change in internal…

A: To explain how to determine whether the change in internal energy was due to heat transfer(Q) or to…

Q: Analyze the importance of thermodynamics knowledge to design a reaction or process system, from the…

A: A thermodynamic system is a body of matter and/or radiation that is contained in space by walls…

Q: A 300-lb iron casting, initially at 600°F, is quenched in a tank filled with 2121 lb of oil,…

Q: 4. A perfect gas, R = 315.4 ft-lb/lb-°R, cy = 0.514 Btu/lb-°R, undergoes an isentropic process such…

A: Given, R = 315.4 ft-lb/lb-oR = 0.4053 Btu/lb-oR cv = 0.514 Btu/lb-oR T1 = 56o R p1 = 23.6 psia V1 =…

Q: Explain the statement: "the laws of thermodynamics can be stated as "you cannot win , you cannot…

A: the statement: "the laws of thermodynamics can be stated as "you cannot win , you cannot break even…

Q: Q4: Answer the following: 1- Explain the maintaining constant temperature despite of the compression…

Q: Suppose that 10 moles of a gas expand isothermally at T= 300 K from an initial volume of 10 L to…

Q: One pound of an ideal gas undergoes an isentropic process from 95.3 psig and a volume of 0.6 ft3 to…

Q: Refrigerant 134a enters a well-insulated nozzle at 200 lbf/in.2, 140°F, with a velocity of 120 ft/s…

Q: Describe the Carnot Principles and briefly discuss the importance.

A: The Carnot Principles or Carnot theorems was created by Nicolas Leonard Sadi Carnot in 1824. This…

Q: Vhose prope sample a. A solid b. An ideal substance c. A pure substance d. A standard substance 6.…

Q: 8. Name the widely used thermodynamic diagrams for a pure substance.

A: As per our guidelines we are supposed to solve only one question if multiple questions are asked .…

Q: Argon gas flows through a well-insulated nozzle at steady state. The temperature and velocity at the…

Q: Water is heated in a boiler tube at steady state from an inlet state of 500 kPa 25 deg-C (State-1)…

A: P1=500 kPa, T1=25 Cexit state: P2=500 kPa, T2=500 C

Q: The following process occurs in a reversible thermodynamic cycle 1-2 :Reversible polytropic…

Q: J 5 By polytropic process, isothermal process or adiabatic process to press the ideal gas from same…

Question

It's a thermodynamics question.

Calculate the final temperature of the gas after the following operations, which each start
with the same initial arrangement. The thermal capacity of the cylinders is to be ignored.
(a) The valve is fully opened and the gas slowly drawn into B by pulling out the piston B;
piston A remains stationary.
(b) Piston B is fully withdrawn and the valve is opened slightly; the gas is then driven as far
as it will go into B by pushing home piston A at such a rate that the pressure in A remains
constant: the cylinders are in thermal contact.

Two thermally insulated cylinders, A and B, of equal volume, both equipped with pistons,
are connected by a valve. Initially A has its piston fully withdrawn and contains a perfect
monatomic gas at temperature T, while B has its piston fully inserted, and the valve is closed.

Science that deals with the amount of energy transferred from one equilibrium state to another equilibrium state.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The first law of thermodynamics deals with While the zero law deals with.....
Thermodynamics I
thermodynamics
Boyle's law states that
An oil pump operating at steady state delivers oil at a rate of 10 Ib/s through a 1-in.-diameter exit pipe. The oil, which can be modeled as incompressible, has a density of 100 lb/ft and experiences a pressure rise from inlet to exit of 40 Ibf/in?. There is no significant elevation difference between inlet and exit, and the inlet kinetic energy is negligible. Heat transfer between the pump and its surroundings is negligible, and there is no significant change in temperature as the oil passes through the pump. Determine the velocity of the oil at the exit of the pump, in ft/s, and the power required for the pump, in hp.
A 30-lb iron casting, initially at 1500°F, is quenched in a tank filled with 2121 lb of oil, initially at 80°F. The iron casting and oil can be modeled as incompressible with specific heats 0.10 Btu/lb. °R, and 0.45 Btu/lb. °R, respectively. (a) For the iron casting and oil as the system,determine the final equilibrium temperature, in °F. Ignore heat transfer between the system and its surroundings. T+= 257.4978 (b) For the iron casting and oil as the system,determine the amount of entropy produced within the tank, in Btu/°R. Ignore heat transfer between the system and its surroundings. 0 = °F i Btu/°R
Take your time to solve i need correct answer only
Explain about availability in thermodynamics in detail.. like formulas and when it's applicable and much more data. (please don't just give definition...I need everything in detail all concept of entropy...I didn't able to understand)
A 300-lb iron casting, initially at 600°F, is quenched in a tank filled with 2121 lb of oil, initially at 80°F. The iron casting and oil can be modeled as incompressible with specific heats 0.10 Btu/lb. °R, and 0.45 Btu/lb. °R, respectively. (a) For the iron casting and oil as the system,determine the final equilibrium temperature, in °F. Ignore heat transfer between the system and its surroundings. T₁ = i (b) For the iron casting and oil as the system,determine the amount of entropy produced within the tank, in Btu/°R. Ignore heat transfer between the system and its surroundings. J = °F Mi Btu/ºR
A heat engine using air starts with p1 = 3 atm and V1 of 5 L. Its pressure increases at constant volume to p2. It then expands adiabatically to V3 = 12 L. Finally it returns at constant pressure to its original state. Can someome please explain how to calculate Q12 and Q31 ? Please show all work so I can understand the process! Thank you!
thermodynamics
An oil pump operating at steady state delivers oil at a rate of 11 lb/s through a 1-in.-diameter exit pipe. The oil, which can be modeled as incompressible, has a density of 70 Ib/ft³ and experiences a pressure rise from inlet to exit of 40 Ibf/in?. There is no significant elevation difference between inlet and exit, and the inlet kinetic energy is negligible. Heat transfer between the pump and its surroundings is negligible, and there is no significant change in temperature as the oil passes through the pump. Determine the velocity of the oil at the exit of the pump, in ft/s, and the power required for the pump, in hp.