Two tanks connected by three pipes in series are shown in Figure 2. The lengths of these pipes are 400 m, 200 m and 250 m and diameters are 300 mm, 200 mm and 250 mm respectively. The difference in water surface in the two tanks is (12+X) m. If coefficient of friction of the three pipes is 0.006, evaluate the following: x=8 (a) Rate of flow through the pipes considering all the losses; (b) Diameter of an equivalent pipe of the same length. H= (12+X) m L;= 400 m L= 200 m Ly= 250 m Jd;= 300 mm d;= 200 mm dy= 250 mm

Two tanks connected by three pipes in series are shown in Figure 2. The lengths of these pipes are 400 m, 200 m and 250 m and diameters are 300 mm, 200 mm and 250 mm respectively. The difference in water surface in the two tanks is (12+X) m. If coefficient of friction of the three pipes is 0.006, evaluate the following: x=8 (a) Rate of flow through the pipes considering all the losses; (b) Diameter of an equivalent pipe of the same length. H= (12+X) m L;= 400 m L= 200 m Ly= 250 m Jd;= 300 mm d;= 200 mm dy= 250 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: The smooth pipes used in the pumping system in the figure below have a diameter of 150 mm. and its…

Q: Q5: For the system shown in figure. Find the total head loss from (A) to (B). the pipe…

Q: Q/ The three water-filled tanks shown in figure are connected by pipes as indicated. If minor losses…

Q: Doummate the power an 7- Water to run a Pelton wheel is supplied by a penstock of length e and…

Q: As seen in Figure 3 below, the water from the tank 1 is pumped to the tank 2 with a flow rate of…

Q: 4. The pipe system shown in the Figure. The flow rate in pipes AB and FG is 0.88 n'/s. All pipes are…

Q: The water is flowing through a pipe having diameters 45 cm and 15 cm at sections tand 2…

A: Given data diameter at section 1 (d1) = 45 cm diameter at section 2 (d2) = 15 cm discharge rate…

Q: A tank with a bottom cross-sectional area Bx Y is to be emptied by means of a pipe as shown in the…

A: Please refer the answer provided in the next page.

Q: 3. Three pipes of diameters 0.4m, 0.2m and 0.3m of lengths of 400m, 200m, and 300m, respectively,…

Q: QUESTION 5 5.1 A pipe of diameter 300 mm and length 3 000 m is used for the transmission of power by…

Q: Consider the following pipe system. The three water-filled tanks are connected by pipes with…

A: Given dataD1=0.10mν=1×10-6m2/sQ=0.028cms

Q: For the hydraulic system of Figure, the following data are given: The pump is adding2.984kW to the…

Q: Figure shows a portion of a fire protection system in which a pump draws water at 60°F (v =1.21…

A: To find: The required height h of the water level in the tank to maintain the pressure 5 psig at…

Q: Answer the attached file

A: The diameter of the pipe between pump and reservoir is D1=20 cm. The length of the pipe pipe between…

Q: The water is flowing through a pipe having diameters 40 cm and 15 cm at sections Tand 2…

A: As per our guidelines, we are supposed to solve only three sub-parts if multiple sub-parts are…

Q: The centrifugal pump in the figure pumps the water at 25°C from the tank 1.22 m above its inlet…

Q: The pump in the figure shown draws water from a reservõir and discharge through a which terminates…

Q: The device shown in the figure is known as a venturi. In this specific venture, the differential…

Q: kindly help me with this problems INSTRUCTIONS: Solve the problems neatly and systematically. Use…

Q: 03: Answer ONE Section only. a. Three reservoirs are connected, if pipe (1) and pipe (3) having…

Q: Flow takes place between three reservoirs, as shown in Figure 1. The volume flow rate out of…

Q: Design the chilled water pipes system shown in the figure below and find the power of the pump…

Q: Flow takes place between three reservoirs, as shown in Figure 1. The volume flow rate out of…

Q: The device shown in the fugure below is known as a venturi. In theis specific venturi the…

A: Given:P1-P2=5psiD2D1=0.35D2=8in=812fthere,P1 and P2=Pressure at section 1 and 2 of venturiD1 and…

Q: l Resolving of Example (1-3) Two reservoirs with a difference in elevation of 15 m are connected by…

Q: Two pipes in a series have a flow rate of 50 L/s. The pipe upstream is 300 mm and reduced downstream…

A: Given Data Q=50 L/s D1=300 mm D2=150 mm

Q: FOR THE PIPE NETWORKS SHOWN, THE FLOW OF WATER FROM A TO THE FIRST JUNCTION IS 2 CUBIC FEET PER…

A: given that , Q1=2 Av1=2 3.14✕0.335✕0.335✕v1=2 v1=2/0.35 =5.71ft/s Head loss is express by Darcy…

Q: The hydrostatic transmission shown in the figure, is used to move a pulley attached to the shaft of…

A: Write the given data

Q: Water flows initially from tank A to B through a single pipeline which is 150 mm in diameter and 150…

A: Length of first pipe, L1=150mDiameter of first pipe, d1=150mm=0.150mFlow rate need to increased by =…

Q: The discharge of water in the given pump is given as 0.030 cubic meters per seconds. Use Ywater 9.79…

Q: Give detailed solution,Only Handwritten.

A: Step 1: Step 2: Step 3: Step 4:

Q: Two reservoirs are connected by a pipeline consisting of pipe 1, pipe 2, and pipe 3, with the length…

Q: A centrifugal pump driven by a 120-kW motor rotating at 2400 rpm is used to pump 20°C water in a…

A: Solution: Given Data: P=120 kWN=2400 rpmT=20oCH=30 mη=70%h=9 m To Find: (a) Calculate Zmax? (b) If…

Q: hown in the figure below is a pipe system (commecial steel pipes) having a given centerline geometry…

Concept explainers

Fluid Dynamics

The study of the flow of gases and liquids, usually in and around solid surfaces, is known as fluid dynamics in physics and engineering. Fluid dynamics, for example, can be used to evaluate the movement of air through an airplane wing or the surface of a vehicle. It can also be used in ship design to increase the speed at which ships pass through water.

Question

100%

Two tanks connected by three pipes in series are shown in Figure 2. The lengths of these pipes
are 400 m, 200 m and 250 m and diameters are 300 mm, 200 mm and 250 mm respectively. The
difference in water surface in the two tanks is (12+X) m. If coefficient of friction of the three pipes
is 0.006, evaluate the following:
x=8
(a) Rate of flow through the pipes considering all the losses;
(b) Diameter of an equivalent pipe of the same length.
H= (12+X) m
L;= 400 m
L= 200 m Ly= 250 m
Jd;= 300 mm d;= 200 mm dy= 250 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Trending now

This is a popular solution!

Step by step

Solved in 7 steps with 17 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

2500kW power is generated shown in the Figure with a water flowrate of 20 m3/s. The head loss for the entire flow is 2.5m. (a) Find the pressure difference P1 - P2 across the turbine. (b) Find h You can neglect the head loss between point 1 and 2.
solveeee very very fast in 15 min | I need a clear answer by hand, not by keyboard
Friction in pipe cause 1. Reduction in velocity 2. Reduction in pressure 3. reduction in potential energy 4. Increase in pressure
1. To model power production in a traditional hydroelectricity unit, we can use the below schematic figure. Water (e= 998 kg/m3, µ = 0.001 kg/m.s) flows from a large tank at elevation 60 m through a cast iron pipe with total length of L diameter 0.1 m. There are three losses associated with sharp-edge entrance, 90° reg- ular elbow and an open globe valve. Outlet of the valve is discharged to atmosphere. The velocity of the water in the pipe is 3 m/s. For minor losses use values for a flanged pipe with diameter of 4". Find the power produced in the turbine in kW 100 m and unit. Hint: If we write energy grade equation between point 1 (surface of water in tank) and point 2 (left hand side of the valve);" P V P V + 21 – hturbine - Ahtot 2g + 2 pg pg 2g where, P = P2 = Patm and Vi 0 (large tank) Sharp-odge entrance 60 m Elbow Turbine Ginhe Valhe
Two tanks A and B are connected by a pipe 30 m long. The first 21 m has a diameter of 75 mm and then is suddenly reduced to 50 mm for the next 9 m. The difference of levels between the tank water levels is 2.40 m. Pipe coefficient f=0.005 and the contraction coefficient at sudden change in area is 0.58. Find all the losses, in terms of velocity v2 at exit from the 50 mm2pipe and hence find rate of flow. Draw the Hydraulic gradient line.
None
In the figure below, assume the pipe from B to C has a diameter of 4-inches, (f = 0.035), and length of 18-feet. The pipe from DE is 187-feet, has a diameter of 4-inches and friction factor of 0.035. The Az = 69-feet. The elevation of C is 14-feet above the lower water surface. If the pressure head @ C is to be no less than (-) 20 feet, and the pump has 63% efficiency, what horsepower must be supplied to the pump in order to convey flow through the system? (Kent = 0.8) Assume a submerged exit. Az
A pipe of 50 mm diameter and 4,5 km length connects two reservoirs whose constant difference of water level is 12 m. A branch pipe 1,25 km long and taken from a point distance of 1,5 km from reservoir A, which leads to reservoir C whose water level is 15 m below that of reservoir A. Find the diameter of the branch pipe so that the flow into both the reservoirs is the same. Assume the coefficient of friction for each pipe, f=0.0075,and neglect minor losses.
Elevation = 100 ft D¸ = 1 ft (1) l (1) e, = 1000 ft D2 = 1 ft lz = 500 ft B V Elevation = %3D 20 ft (2) D3 = 1 ft (3) Elevation = l3 = 400 ft O ft Three open reservoirs are connected by pipes as shown above. It is assumed that the pipe diameter is equal to the friction factor of 0.03. Because theratio of the LIDpipe is large, the minor losses are ignored. Determine the flow in or out of each reservoir! Draw with sketch 5.
4. Water (p = 1000 kg/m³) is transferred from a large lake to an open storage tank located at elevation as shown in the Figure 2 below at a flowrate of 90m³/hr. The losses through pipe and fittings (hL) is given as 8m. Determine the mechanical efficiency of the pump if the shaft power required is 12kW. State the assumptions made in your calculations. 30 m WaterLevel Pump Centre Figure 2 Tank
6-1 Determine the flow rate through the Venturi meter shown in the diagram if the ideal conditions exist. P₁ = 735 kPa Q 31 mm P₂ = 550 kPa 19 mm y=9.1 kN/m³
The smooth pipes used in the pumping system in the figure below have a diameter of 150 mm. and its total length is 80 m. In this system; There are four bends with a loss coefficient of 0.2. Lost coefficients; 0.5 for the inlet to the pipe, 0.7 for the valve and 1 for the entrance to the tank. z2-z1 = 15 m above If the flow rate of the water pumped to the tank is 50 L / s and the overall efficiency of the pump is 84%, the manometric discharge Find its height and strength. Take the viscosity of water as 0.001 kg / m.s.