Two tanks are connected as shown in Figure, both containing water. Tank A is at 200 kPa, v = 0.5 m/kg, VA =1m, and tank B contains 3.5 kg at 0.5 MPa and 400•C. The valve is now opened and the two tanks come to a uniform state. Find the final specific volume.

Q: An oxygen tank has a volume of 4 cubic meters and is at 20 degrees C and 700 kPa. The valve is…

A:

Q: What is the gage pressure on the bottom of the tank, in kPa? What is the absolute pressure on the…

A: Diameter d = 3mHeight h = 11 mAtmosperic presure Patm=101.325 KPa

Q: Q4 : (Section A) A vessel has a volume of 0.1 m³ is fitted with a plunger enclosing 0.5 kg of steam…

A: The specific volume of the steam is The required properties of steam for the determined specific…

Q: 5. 250 mL of cold water (2° C) from the refrigerator is in a glass and placed on the counter in the…

A: Specific Heat of Water

Q: Let the pressure in the cylinder shown below be a function of volume such that P = C/V (where C is a…

A: Work is said to be done by the system if the sole effect to the things external to the system gets…

Q: Two cylinders are filled with liquid water (p = 998 kg/m³), and connected by a pipe line with a…

A: Givenρ=998 kg/m3dA=42.75cm=0.4275mdB=55cm=0.55mmA=125kgmB=450kgh=0.85mPo=100kPa

Work and Heat Transfer

It is generally related to thermal engineering which tells about the use, creation, conversion and transfer of heat energy between the systems. It is also considered that to transfer heat from one source to another, transfer of masses is also required. There are various mechanisms by which, transfer of heat takes place i.e. thermal conduction, convection, radiation or by change of phase. All these mechanisms have their own specific features which sometimes occur simultaneously within the same system.