Two samples of the same soil is subjected to pH analysis using a pH meter, the first is analysed using 1:1 soil:water ratio and the other with 1:1 soil:KCl ratio, what would be the most probable result?* Soil analysed using 1:1 soil:KCl will register a lower pH compared to that of soil analysed using 1:1 soil:water ratio Soil analused using 1:1 soil:KCl ratio will register a higher pH compared to that of soil analysed using 1:1 soil water ratio Soil analysed using 1:1 soil:water ratio will have the same pH with that of soil analysed using 1:1 soil:KCl ratio Soil analysed using 1:1 soil:water ratio will register a lower pH compared to that of soil analysed using 1:1 soil:KCl ratio

Two samples of the same soil is subjected to pH analysis using a pH meter, the first is analysed using 1:1 soil:water ratio and the other with 1:1 soil:KCl ratio, what would be the most probable result?* Soil analysed using 1:1 soil:KCl will register a lower pH compared to that of soil analysed using 1:1 soil:water ratio Soil analused using 1:1 soil:KCl ratio will register a higher pH compared to that of soil analysed using 1:1 soil water ratio Soil analysed using 1:1 soil:water ratio will have the same pH with that of soil analysed using 1:1 soil:KCl ratio Soil analysed using 1:1 soil:water ratio will register a lower pH compared to that of soil analysed using 1:1 soil:KCl ratio

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.3P

See similar textbooks

Related questions

Q: | 2a. The following data was obtained from Liquid Limit Test conducted at a Soil Lab. Using the data…

A: Given data, Plastic limit = 22 Liquid limit will be the water content at 25 blows.

Q: Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS…

Q: 2. Interpret the results of the proctor test in table 1 and plot the images of the optimum moisture…

A: Given,Soil mass vs water content data Gs = 2.7FindRange of moisture cintent values in the field that…

Q: A liquid limit test conducted on a soil sample in the cup device gave the following results: 10 19 |…

Q: A laboratory test was conducted according to Method A of the ASTM D4318 to find the liquid limit of…

A: The wet mass of the soil sample with the mass of the can is measured, again the dry mass of the…

Q: Q3 The results of a particle size analysis of a soil are given in the following Table. No Atterberg…

A: Calculating the percentage retained: Sieve no. Sieve size (mm) % finner % retained 3/8 in 9.53…

Q: The permeability test must be carried out on a soil sample 15 cm long and 8 cm in diameter using the…

A: Constant and variable head permeameters are used for the measurement of permeability of soils.

Q: What is the % natural moisture content of the soil sample tested in the laboratory with the…

Q: A glass cylinder 5 cm internal diameter and with a screen at the bottom was used as a falling head…

Q: During test for water content determination on a soil sample by pycnometer. The following…

Q: Paragraph Liquid Limit Determination Specimen No. No. of Blows Wt. of Container Wt. of Container +…

Q: A carefully-weighed 45.3 gram soil sample was dispersed for particle-size analysis using the…

Q: A soil sample is subjected to laboratory sieve analysis using a complete set of standard IS sieves.…

Q: The same soil sample has a natural moisture content of 30% and was subject to the Atterberg Limits…

Q: In an experiment to calibrate the Hydra Probe soil moisture meter by volume the results were as…

A: Calibration equation is determined by regression analysis as, Plotting instrument reading on y axis…

Q: A sample of field soil is tested in the laboratory. The results of Standard and Modified Proctor…

A: ASKED: To compute: degree of compaction/relative compaction (R%) at Standard Proctor Test degree of…

Q: A sample of field soil is tested in the laboratory. The results of Standard and Modified Proctor…

A: The ratio of field dry density to maximum dry density ( density corresponding to optimum moisture…

Q: Note: Answer 5 questions only. Q1: A cylindrical soil specimen of 50 mm diameter and 100 mm long is…

A: Hi there!! since you have asked multiple questions, as per our honour codes we will solve the first…

Q: A Sample of soil was tested in the laboratory, and the test results were listed as follows. Classify…

A: Mechanical Grain Size Analysis Sieve Number Percentage Passing Retained % 1 in 100 0 0.75 in…

Q: The results of tests are given below. Hydrometer analysis was carried out on sample D. The soil is…

A: Grain size distribution curves of samples A, B, C and D are given below. The values of CuC_{u}Cu…

Q: Classify the soil by the USCS system.

Q: Mechanical analysis on four different samples designated as A, B, Cand Dwere carried out in a soil…

Q: A liquid limit test conducted on a soil sample in the cup device gave the following results: N 10 19…

Q: 2. Table 2 shows the results of the standard proctor test Water content (%) Weight (kg) 14 16,5 18,5…

A: Volume of mold = 943 cm3 Specific gravity of solids, Gs = 2.7

Q: 2a. The following data was obtained from Liquid Limit Test conducted at a Soil Lab. Using the data…

A: Given data:- Specimen number 2 3 No of blows 20 28 W1 (G) 7.31 7.78 W2 (G) 27.31 28.41 W3…

Q: Mechanical analysis on four different samples designated as A, B. Cand D were carried out in a soil…

Q: The specific gravity of grains of the soil was determined in the laboratory, using a pycnometer and…

Q: A carefully-weighed 52.9 gram soil sample was dispersed for particle-size analysis using the…

Q: A liquid limit test on a clay was performed with the following results. The natural water content of…

A: To find out the liquid limit of soil.

Q: You are working in a lab and are tasked with determining the percent plant available water for a…

A: Mass of your sample = 152 gm Moisture (w) = 18.3% or 0.183Mass of your sample at -33 kPa = 164.2 gm…

Q: Mechanical analysis on four different samples designated as A, B. Cand Dwere carried out in a soil…

Q: 4. The results of liquid limit testing on 3 samples of a soil are shown below. sample 2 3 mass (g)…

Q: The table below shows the laboratory results of the sieve analysis of a sample. The soil has a…

A: Solution: Given Data:Liquid limit of soil=35%Plastic Limit=9%

Q: Mechanical analysis on four different samples designated as A, B, Cand Dwere carried out in a soil…

Concept explainers

Soil engineering for highway design

Soil engineering is a part of geotechnical engineering that deals with the characteristics of soil. It also helps to understand the behavior of the soil in different conditions. The basic concepts of soil are studied to check the strength, compressibility, and porosity of the soil. This makes soil engineering an important topic for civil engineering.

Question

Soil analysed using 1:1 soil:KCl will register a lower pH compared to that of soil analysed using 1:1 soil:water ratio

Soil analused using 1:1 soil:KCl ratio will register a higher pH compared to that of soil analysed using 1:1 soil water ratio

Soil analysed using 1:1 soil:water ratio will have the same pH with that of soil analysed using 1:1 soil:KCl ratio

Soil analysed using 1:1 soil:water ratio will register a lower pH compared to that of soil analysed using 1:1 soil:KCl ratio

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1 Image_1

VIEW

Step 2 Image_2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Mechanical of soil
A soil sample is subjected to laboratory sieve analysis using a complete set of standard IS sieves. Out of 2 kg of soil used in the test, 800 gram was retained on IS 600 micron sieve, 1000 gram was retained on IS 500 micron sieve and the remaining 200 gram was retained on IS 425 micron sieve. The uniformity co-efficient for the soil is: 1.1.2 X2. 0.833 X3. 1.412 X4.0.71 Сол Дво Dio Que Chos
2a. The following data was obtained from Liquid Limit Test conducted at a Soil Lab. Using the data given in Table 01, determine the following; Table 01: Liquid Limit Test data for the particular soil sample Liquid Limit Determination Specimen No. No. of Blows Wt. of Container Wt. of Container + Wet Soil Wt. of Container + Dry Soil i. ii. Unit 1 14 7.11 (g) (g) (g) 21.31 27.91 2 20 7.31 27.31 21.21 3 28 7.71 28.41 22.31 4 32 10.91 30.11 24.61 5 39 7.21 26.51 21.11 Determine the Liquid Limit and Flow Index If Plastic Limit of this soil is 22. Classify the soil based on BS Soil Classification system. I
You are working in a lab and are tasked with determining the percent plant available water for a particular soil sample. You take a field soil sample. The mass of your sample was 152g and it had 18.3% moisture by mass. Then, you place the soil sample in your pressure plate extractor and determine that the soil sample weighs 164.2g when the moisture potential is -33kPa and 130.7g at -1500kPa. What is the percent plant available moisture by mass of this soil sample? Please answer to one decimal place.
Paragraph Liquid Limit Determination Specimen No. No. of Blows Wt. of Container Wt. of Container + Wet Soil Wt. of Container + Dry Soil İ. ii. a. The following data was obtained from Liquid Limit Test conducted at a Soil Lab. Using thedata given in Table 01, determine the following; Table 01: Liquid Limit Test data for the particular soil sample Unit (g) (g) (g) 1 14 7.13 27.93 T Body Text T Heading 1 T List Para... T No Spac... 21.33 2 20 7.33 27.33 21.23 3 28 7.73 28.43 22.33 F/QAP/021/004 4 32 10.93 Styles 30.13 24.63 5 39 7.23 26.53 21.13 Determine the Liquid Limit and Flow Index If Plastic Limit of this soil is 22. Classify the soil based on BS Soil Classification system. T Norma
x=5 , y=6 , z=7
Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS Method and AASHTO Method. Moisture content = 5.75% Limit liquid = 53.5 Plastic limit = 31.6 Granulometry Sieve % Pass No. 4 100 # 40 68 # 200 54.3 Do you select the best answer? a) Inorganic silt and sand, with low plasticity b) Inorganic clay with low plasticity c) Clay silt, traces of gravel, dark Brown
2a. The following data was obtained from Liquid Limit Test conducted at a Soil Lab. Using the data given in Table 01, determine the following; Liquid Limit Determination Specimen No. No. of Blows Wt. of Container Wt. of Container + Wet Soil Wt. of Container + Dry Soil i. ii. Unit 1 14 (g) 7.17 (g) 27.97 (9) 21.37 2 20 7.37 27.37 21.27 3 28 7.77 28.47 22.37 4 32 10.97 30.17 24.67 I Determine the Liquid Limit and Flow Index If Plastic Limit of this soil is 22. Classify the soil based on BS Soil Classification system. 5 39 7.27 26.57 21.17
Please do all questions. Soil course.
W1
A sample of field soil is tested in the laboratory. The results of Standard and Modified Proctor tests at optimum moisture content are given in the Table below: Standard Proctor test Modified Proctor test Mass of wet soil in the mold (g) 1800 2000 Volume of Proctor mold (cm?) 900 1000 Optimum moisture content (%) 12 10 At the field, a sample of 600 cm3 of this soil weighted 1200 g. The weight of water in this sample was 200 g. Find the following: 1- Degree of compaction (Relative compaction) (R%) at Standard Proctor test. 2- Degree of compaction (Relative compaction) (R%) at Modified Proctor test.
-