Two identical steel [E = 200 GPa] pipes, each with a cross-sectional area of 2600 mm?, are attached to unyielding supports at the top and bottom, as shown. At flange B, a concentrated downward load of P = 290 kN is applied. Determine the normal stress in the upper pipe (1). A (1) 1.6 m B P 2.8 m (2) 84.9 MPa (T) 49.7 MPa (T) O 46.1 MPa (T) 67.2 MPa (T) O 71.0 MPa (T)

Q: The __________ square has a moveable inch-graduated blade. Select one: A. SPEED SQUARE B. FRAMING…

A: The combination square has a movable inch graduated blade.

Q: True or False: The BREAK command requires two separate points when breaking a circle.

A: The BREAK command is used to break the selected object between two points.

Q: 6. Approximate a spindle speed of 1000 rpm into rad/s. Spindle diameter = 200 mm 2.25 rad/s .16 mm/s…

A:

Q: Which set of ordered processes best describes the steps to perform an emergency stop and reset of…

A: A lathe machine is used for the turning, facing, drilling, and surface finishing processes of…

Q: When it comes to finding the moment arm, you must use the distance of the line from the pivot to the…

A: Explanation When it comes to finding the moment arm, you must use the distance of the line from the…

Slope and Deflection

The slope in a deflected beam is described as an angle in radians made by the tangent of the section with the original axis of the beam. The deflection at any point on the axis of the beam is defined as the lateral displacement of the point before and after loading.