To determine the moisture content , samples of fine and coarse aggregate from the supplied source were collected in measuring trays and were dried in an oven. The initial weights and ovendry weights of sample aggregates in the tray are shown in the table. Determine the moisture content in the given fine and coarse   Assume that the saturated surface dry SSD moisture conditions for fine and coarse aggregate are 1 percent and 2 percent, respectively. Determine the total free-water (extra moisture) in the concrete mix, if 220 kg of fine aggregate and 425 kg of coarse aggregate from the given source were to be used for preparing mix.

Q: To test the compressive strength of cement mortar, three 2” cubes were cast with three different…

A: Given: Length of mortar cubes = 2 in   Mix No. w/c Ratio Cube No. Maximum Load (lb) 1…

Q: .: using the British Method, design a Concrete mix for a blinding with a specified characteristic…

A:

Q: Compute the water/cement ratio needed to obtain no porosity in cement paste which has hydration…

A: Given values: Hydration degree = 75% at no porosity in cement paste.

Q: Compute for the DESIGN MIX of concrete a. by volume b. mass basis c. in situ state I. II.…

A: Hi! Thank you for the question As per the honor code, We’ll answer the first question since the…

Q: (b) Aggregate is one of the main materials used in the production of concrete and its physical…

A: Both the qualities of fresh concrete and those of hardened concrete may be significantly influenced…

Q: Please show full steps correctly and handwritten thankss

A: Based on the information provided and the image you sent, it appears to be a word problem related to…

Q: y consider the following data for concrete with mild exposure, calculate the quantity of cemer…

A: Given:Volume of water=191.6 litreWater cement ratio=0.5

Q: Write any five difference between Ordinary Portland Cement and Pozzolana Portland Cement

A: Ordinary Portland Cement (OPC): A blend of limestone and raw materials, such as gypsum,…

Q: 5.8 A sample of wet aggregate weighed 297.2 N. After drying in an oven, this sample weighed 281.5 N.…

A:

Q: List the steps involved in proportioning of concrete (i.e. mix design) if the required concrete…

A: Moisture content MC : The aggregates contain some amount of water already. Such water is called as…

Q: Just after casting, a cement paste had a porosity of 60%. After 3 months, the porosity was reduced…

A: The cement hydrates in the presence of water. On hydrating the cement begins to harden. It uses up…

Q: Q-5, In a concrete mix of proportion 1:3:6, find the actual quantity of sand, which is judged to…

A: Given- Concrete mix proportion- 1:3:6, Bulking =15 %, It is needed to find the actual volume of the…

Q: Determination of Normal Consistency of Hydraulic Cement Calculation Calculate the amount of water…

A:

Q: Calculate the weight of cement that should be in a batch if the design mix requires concrete to have…

A: The given data is shown below: Water-cement ratio=0.45Dry gravel=1258 kg/m3Water=122 kg/m3Air…

Q: Aggregate is one of the main materials used in the production of concrete and its physical…

A: In concrete more than 70% volume is filled by aggregate hence if any problem in aggregate then it…

Q: The weights of ingredients for producing 1 m³ of concrete as obtained from mix design calculations…

A: weight of ingredients = 1 m3 Absorption capacities of coarse aggregate = 2 %Absorption capacities of…

Q: TRUE OR FALSE The recommended air content decreases with increasing the nominal maximum aggregate…

A:

Q: Design a concrete mix for construction of an elevated water tank. The specified design strength of…

A: Given,  Mix design data

Q: Create a design mix using the ACI DESIGN MIX PROCEDURE with the following parameters: Non-Air…

A: Reference : ACI 318 1. Find W/c ratio: Table : Relationship between water to cementitious material…

Q: Prepare mix design for given data • The 28-day compressive strength should be 5000 psi, The slump…

A: Let the total volume of trial mix be 1 cubic yard  then according to ACI 211.1-91, table 6.3.3, for…

Q: Create a design mix using the ACI DESIGN MIX PROCEDURE with the following parameters: Non-Air…

A: Given:- A non-Air Entrained Concrete is used The required Strength = 3500 psi The required Slump = 6…

Q: 3) For the beams and columns of a structure the followings are specified or determined. Design an…

A:

Q: / Weight of water density of water Weight of cemena 3.15x density of wa Weight of CA WATER CEMENT…

A:

Q: ACI METHOD OF CONCRETE MIX DESIGN Step 1. Choice of slump Step 2. Choice of maximum size of…

A: Absolute Volume Method: Absolute volume method is one of the methods used for concrete mix design.…

Q: Coarse aggregate is not part of standard mortar mixture True O False

A: Mortar is a combination of a binding material and a supporting material. The binding material could…

Q: 1. Following data are given for designing a Portland cement concrete mix for a nonstructural…

A: Note:- Hi, thank you for the question. As per our Honor code, we are allowed to attempt the first…

Q: Second Section The composition of a certain brand of cement is given (C3S = 53.0%, C2S = 18.0%,…

A: First answer is rapid hardening cement because of more c3s content.  So first answer is rapid…

Q: The following table represents a concrete mixture that has not been completely proportioned. The…

A: The water to cement ratio compares how much water versus cement is used in a concrete mix. A low…

Q: The trial mix proportions of concrete is C:W:S:G = 1: 0.5: 2.35: 4.32. The slump of trial mix is…

A: Reference : Concrete Mix design, Trial Mix Proportion. Given : Trial mix proportion, Amount of…

Q: Depending on the properties of the different chemicals and their relative composition, identify the…

A: Tri Calcium Aluminate (3CaO.Al2O3) or C3A is responsible for the flash setting of the cement and…

Q: Calculate the chemical shrinkage (cm3/g) for one gram of completely hydrated Portland cement with…

A: Given, C3S = 65% C2S = 19% C3A = 4% C4AF = 9%

Q: Compute for the corrected in the concrete mix if ther aggregates are 650 kg and

A: Amount of water absorbed by Fine ans cooarse :=1.5% of 650+ 2% of 780=9.75+15,6=25.35kg

Q: Example select a mix proportional of 28-day compressive strength (measured on standard cubes) of 44…

A: w/c ratio = 0.55 (maximum) Cement Content = 290kg/m3 Water Content = 0.55 Cement Content = 159.5…

Q: The recommended dosage on a viscosity modifying admixture is 5 fl oz/cwt. The proportions of the…

A: Recommended dosage on a viscosity modifying admixture = 5 fl oz/cwt. Coarse aggregate = 1800 lbFine…

Q: list primary chemical reactions during Cement Hydration

A: The process of mixing cement with water is known as hydration. Cement mainly consists of five…

Q: Determine the volume of the products of hydration and gel/ space ratio for a mix contains 125 gm…

A: Cement quantity= 125 gm Water quantity= 35 ml Hydration took place in sealed specimen. We have to…

Q: 3) For the beams and columns of a structure the followings are specified or Tmned. Design an…

A: Question is based on the concrete mix design . Required average strength ,slump value ,dry rodded…

Q: According to ACI 211 we require a mix with a mean 28-day compressive strength (measured on standard…

A: Solution: Concrete Mix design as per ACI 211 Target mean strength  = 40 MPa Since OPC is used the…

Q: The relative amounts of the four chemicals in the final cement depends on the desired properties of…

A: High Early Strength cement- For gaining strength in the early stages proportion of C3S is increased.…