Time left 0:53:06 Consider an enclosure formed by tl having the following values of shape factors, emissivities and temperatures Surface 1 i.e. curved cylindrical has an emissivity 0.75 and temperature 800 K Surface 2 i.e. closing disc has an emissivity 0.8 and temperature 700 K Surface 3 i.e. closing disc has an emissivity 0.8 and temperature 700 K The closing flat discs are 25 mm in diameter and they have interspacing distance equal to 100 mm. If the shape factor between these two identical discs is 0.05, calculate the net rate of radiant heat flow from the curve surface to each of the closing end surface Disc 1 100 mm Cylindrical surface Disc 25 mm

Time left 0:53:06 Consider an enclosure formed by tl having the following values of shape factors, emissivities and temperatures Surface 1 i.e. curved cylindrical has an emissivity 0.75 and temperature 800 K Surface 2 i.e. closing disc has an emissivity 0.8 and temperature 700 K Surface 3 i.e. closing disc has an emissivity 0.8 and temperature 700 K The closing flat discs are 25 mm in diameter and they have interspacing distance equal to 100 mm. If the shape factor between these two identical discs is 0.05, calculate the net rate of radiant heat flow from the curve surface to each of the closing end surface Disc 1 100 mm Cylindrical surface Disc 25 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

2_5190874259647370... A cylindrical shape is with diameter of 1.2m and length of 1.2m. The top surface has an emissivity of 0.7 and temperature 500 K. The bottom surface has an emissivity of o.5 and temperature 650 K. The side surface has an emissivity of 0.4. Determine the shape factors for all surfaces. E 0.0 L=650 K II >
- A furnace can be considered like a long semicylindrical duct of diameter D = 5 m. The base (1) and the dome (2) of the furnace have emissivity's of 0.5 and 0.9 and are maintained at uniform temperatures of 305 and 1000 K, respectively. a- Draw the network of the system. b- Calculate total resistance. b- Determine the net rate of radiation heat transfer per unit length from the dome to the base surface.
Using a polynomial equation solver, determine the steady-state surface temperature (Ts) of the passive radiative cooler below that is exposed to a windy convective enviroment h=40 W/m2*K and T∞= 25°C. The surrounding atmosphere is fixed at Tsur= 10°C. Set up the energy balance/conservation equation.
MATLAB PROBLEM
An opaque surface at 1000 K if its spectral emissivity is = 0.4, 0.7, and 0.3 for 0 < < 2 µm, 2μm < 6 μm, and 6um
It's a complete question. Need help asap.
1
Solve fast
A blackbody of surface area 10 cm' is heated to 127°C and is suspended in a room at temperature 27°C. Calculate the initial rate of loss of heat fron the body to the room.
A long, horizontal, cylindrical steel reactor, 1 m in diameter, has a surface temperature of 300ºC. The emissivity of the steel is 0.6, and the heat transfer coefficient for natural convection is 5 W m−2 K−1 . Heat is lost by convection to the air at 15ºC, and also by radiation to the surroundings, which can be considered to be a black body at 15ºC. a) Calculate the total heat loss per metre length of the reactor, and the proportions lost by convection and radiation b) The reactor is then insulated with a thin layer of insulation material to reduce the total heat loss to one-tenth of its original value. This causes the surface temperature of the steel to rise to 400ºC. The thermal conductivity of the insulation is 0.01 W m−1 K−1 , and its surface emissivity is 0.2. Show that the resulting surface temperature of the insulation is about 89ºC, and calculate the thickness of insulation required, stating any assumptions made. Specifically need help with part b
A long electrical conductor of 10 mm diameter is concentric with a refrigerated cylindrical tube of 50 mm diameter whose surface has an emissivity of 0.9 and temperature of 27 °C. The electrical conductor has a surface emissivity of 0.6 and dissipates 6.0 W per meter length. Assuming that the space between the two surfaces is empty, calculate the surface temperature of the conductor.
. Calculate the heat transfer rate per m² area by radiation between the surfaces of two long cylinders having radii 100 mm and 50 mm respectively. The smaller cylinder being in the larger cylinder. The axes of the cylinders are parallel to each other and separated by a distance of 20 mm. The surfaces of inner and outer cylinders are maintained at 127°C and 27°C respectively. The emissivity of both the surfaces is 0.5.