Three reservoirs A, B and C are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir A is at elevation 80m, reservoir B at 70m and C is at 60m. Assume f=0.018 for all pipes.

Three reservoirs A, B and C are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir A is at elevation 80m, reservoir B at 70m and C is at 60m. Assume f=0.018 for all pipes.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Upper reservoir elevation = 100m Lower reservoir elevation = 50m The penstock pipe in between the…

Q: Three pipes A, B, C joins at D. A reservoir whose water elevation +140 is connected to pipe A 0.25 m…

Q: Water with density of 1000 kg/m and viscosity of 0.001 Pas is to flow from reservoir A to reservoir…

Q: A straight 30 cm pipeline 4.80 km long is laid between two reservoirs having surfaces at Elev 100 m…

A: Consider the following diagram for the given condition: The numbers 1, 2, and 3 are the three…

Q: Two reservoirs are connected by two pipes P and Q. The pipes have the same diameter and length and…

A: Given data: Two reservoirs are connected in parallel by two pipes P and Q. Friction factor of P is 9…

Q: A straight 30 cm pipeline 4.80 km long is laid between two reservoirs having surfaces at Elev 100 m…

Q: = A flow net (per metre length) gives N₁ = 3 and Nd 30 for a net head of 10 m. Calculate the…

A: Given data: A flow net gives, Total number of flow channel, Nf=3 Total number of equipotential drop,…

Q: Please include a free body diagram A new 45 cm CI pipe, 600 m long carries 260 L/s of water from an…

A: we know that the discharge through the reservoir is equal to the sum of discharge through the…

Q: 5.Pipes 1,2,3 are connected in parallel to connect the two reservoirs. The discharge in th main pipe…

Q: 5. The outlet line which leaves the dam at elev 272 m has a diameter of 600 mm and is 2.9 km long.…

Q: QUESTION 2) Pump gives 20 m of head to the flow (H, = 20 m). Neglect all kinds of minor %3D losses.…

A: For pipe I: The pressure head available= Head losses due to frictional+ value.…

Q: Three Reservoirs A B and C are connected by pipes 1, 2 and 3 respectively which meets at the…

A: Given: Pipe 1 (D=300 mm; L = 450 m; f=0.0198) Pipe 2 (D=150 mm; L = 240 m; f=0.0175) Pipe 3 (D=200…

Q: A reservoir A contains water at an elevation of 45 m. and a 50 mm pipe line leads downhill from the…

Q: Three reservoirs A, B and C at water levels of 25 m, 12 m and 8 m are connected by a pipe network.…

A: Answer - A - Reservoir C feeds reservoirs A and B B - the flow in 900m pipe is = 0.436 m3/s…

Q: A 13-cm diameter pipe of length 100 m with z = 60 m and f = 0.02. What is the flow rate? D=13cm,…

Q: L1 =600m, D¡ = 0.3m, L2 = 900m, D; =0.4m, L3 =1500m, and D3 = 0.45m. When the discharge is 0.11 m³/s…

A: Pipes in series problem in this problem individual loss of head is equal to the elevation…

Q: reservoir b in the figure receives 0.09 m^3/s of flow. Properties of each pipe: Pipe # 1: Length =…

Q: 1. Four reservoirs are connected as shown below. Minor losses can be ignored. Determine the flow…

A: Four reservoirs are connected as shown in the figure.Coefficient of friction, f = 0.02Pipes Length…

Q: SITUATION #2c: Three pipes 1, 2, and 3 from three reservoirs A, B, and C, respectively, meet at a…

Q: A 170-m long pipeline, composed of two pipes connected in series, discharges freely at a point 40 m…

A: The total loss in the pipeline for the given question is given by: hL=hentrance+hsudden…

Q: Three reservoirs A, B, and C is connected respectively with pipes 1, 2, and 3 joining at a common…

Q: Three reservoirs A, B, and C are connected by pipelines 1, 2, and 3 respectively which merges at a…

A: Solution:- Given data:- Pipe Diameter Length Friction factor 1 800 mm 1500 mm 0.0157 2 600 mm…

Q: Three reservoir are connected as shown in figure 1. What is the discharge in each line? All pipes…

A: The given figure is shown below:

Q: Upper reservoir elevation = 100m Lower reservoir elevation = 50m %3D The penstock pipe in between…

Q: Reservoirs A, B and C are connected by pipelines 1, 2 and 3 respectively which meets at the junction…

A: 3 reservoirs are connected by pipelines 1,2 and 3 which meets at junction D Elevation of reservoir A…

Q: a. Calculate the flow rate out of the reservoir, if at the discharge (point C) the cros sectional…

A: Given -

Q: 2. Water is pumped from a lower reservoir using a 75 kW pump. If the height of water at the higher…

Q: A 170-m long pipeline, composed of two pipes connected in series, discharges freely at a point 40 m…

Q: 1. The three reservoirs A, B and C are connected by pipelines 1, 2 and 3, respectively. The…

A: Three reservoirs A, B, C are connected by pipeline as shown in the figure. The length, diameter,…

Q: A reservoir has an outlet through a rectangular suppressed weir with a crest length of 1m. If its…

A: Answer is 636 sec but according to your options the 501 sec is nearest.

Q: 46 m D=0.15 m P P=150 kPa

A: P1 = 150 kPaP2 = 0 z1 = 0 z2 = 46 m hf = 0v1 = v2Q = 150 m3/hrefficiency = 80%

Q: The three reservoirs, A, B and C are connected by pipelines A, B and C respectively which meets at…

Q: 01(a) There are two reservoirs, A and B, with the water surface elevation in A 10 m higher than that…

A: Given- Height difference=10 mLength of pipes=100 mdiameter d1=30 cmdiameter d2=25 cm

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

Pipe 1: L = 5000 m, D = 300 mm
Pipe 2: L = 4000 m, D = 250 mm
Pipe 3: L= 3500 m
El. 80m
A
El. 70m
B
Qı=0.045 CMS
El. 60m
Determine Q2, Q3 and diameter of pipe 3.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

pls do not round off the decimal. only in the final answer
ELEV. = 75m 1 ... A L = 1700m D = 400mm f = 0.02 ELEV. = 15m C D L = 3500m D = 800mm f = 0.03 A three reservoir problem shown in the figure with their corresponding length and diameter. Determine the discharge in all pipes. (A) Q1 = 0.431 m3/s, Q2 = 0.295 m3/s, Q3 = 0.726 m3/s (B) Q1 = 0.327 m3/s, Q2 = 0.458 m3/s, Q3 = 0.785 m3/s Q1 = 0.295 m3/s, Q2 = 0.413 m3/s, Q3 = 0.708 m3/s (D) No answer among the choices E Q1 = 0.346 m3/s, Q2 = 0.402 m3/s, Q3 = 0.748 m3/s (F) Q1 = 0.286 m3/s, Q2 = 0.519 m3/s, Q3 = 0.805 m3/s 2 ELEV. = 40m B L = 1900m D = 500mm f = 0.025 3
The three-reservoir system is being utilized to supply water for the metropolitan city. The elevations of Reservoir A, Reservoir B, and Reservoir C are 200 mamsl, 150 mamsl, and 40 mamsl, respectively. Pipe A which connects Reservoir A to a junction has a length of 5000 m, diameter of 1200 mm, and C-value of 100. Pipe B which connects Reservoir B to a junction has a length of 1000 m, diameter of 600 mm, and C-value of 90. Pipe C which connects Reservoir C to a junction has a length of 8000 m, diameter of 2000 mm, and C-value of 80. Determine the (a) head loss in meter along Pipe A, Pipe B, and Pipe C, and (b) flow rate in m3/s along Pipe A, Pipe B, and Pipe C.
HYDRAULICS
please answer the problem asap, ty
Three reservoirs A, B and C at water levels of 25 m, 12 m and 8 m are connected by a pipe network. 1200 m length pipe of diameter 0.5 m and f = 0.013 draws water from A. 1000 m length pipe of diameter 0.4 m and f = 0.015 draws water from B and joins the pipe end from A. The reservoir C is connected to this junction by 900 m length of pipe 0.6 m diameter with f = 0.011 What would be the direction of flow? * Reservoir A feeds reservoirs B and C. Reservoir B and C feed reservoir A. Reservoir A and B feed reservoir C. Reservoir C feeds reservoirs A and B. If the flow in the 900m pipe is 0.60 m^3/s, what would be the flow in the 1000m pipe? 0.064 0.042 1 0.129 0.091 Back Next Clear form
Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and C. Neglect minor losses and assume f=0.25 for all pipes. What is the flow in pipe 3? Select one: O a. 329 liters per second O b. 428 liters per second O c. 381 liters per second O d. 206 liters per second
2. Reservoir A, B, and C are connected by pipelines 1, 2, and 3 respectively which meets at the junction x. the elevation of reservoir A is 300 m, reservoir B is 302. 5 m, ad reservoir C is 277 m. A) Compute the flow rate at reservoir A B) Compute the flow rate at reservoir B C) Compute the reservoir C VEL 300 m Qa=0.19326 m³/s Qb = 0.3476 m/s (giver) Qc = 0.5408 m/s LEL 302.5 m VEL 277 m Pipe 1 2 3 0.0208 0.0168 0.0175 diameter (mm) 900 600 450 Length (m ) 800 1200 1000
Three reservoir, named A,B, and C are connected by Pipe 1, Pipe 2, and Pipe 3 respectively joining at a common junction. Determine the into or out of the reservoir A in the pipe system, given the following data. Use n=0.011 for all pipes. Reservoir A at El. 30 m, B at El. 24 m, and C at El. 15 m Pipe 1: 30 cm dia. 1200 m long Pipe 2: 20 cm dia. 900 m long Pipe 3: 16 cm dia. 1500 m long
Three reservoirs A, B, and C are connected by pipeline 1, 2 and 3 respectively which merges at a junction X. The elevation of reservoir A is 350 m and that of B is 290m. The rate of flow from A is 1.5 m^3/s. (See the table) 1. Compute the rate of flow in reservoirs B and C. Pipes Diameter Length Friction factor “f” 1 825 mm 1500 m 0.0155 2 650 mm 450 m 0.0165 3 450 mm 1200 m 0.0175
The three reservoir A, B and C are connected by pipelines A, B and C respectively. The elevation of reservoir A is equal to 200 m while that of C is 178 m. The discharge flowing towards reservoir B is 0.60 cum/sec. Reservoir B is higher than that of C. PIpeline A: 800 mm diam., 1500 m long, f = 0.0158; PIpeline B: 600 mm diam., 450 m long, f = 0.0168; PIpeline C: 450 mm diam., 1200 m long, f = 0.0175 Compute the rate of flow out of Reservoir A in cum/sec. Use 4-decimal places. Compute the rate of flow towards Rservoir C in cum/sec. Use 4-decimal places. Compute the elevation of Reservoir B in m. Use 2-decimal places
M - Problem 3: For these three reservoirs please assume that the elevations of the waterlines in reservoirs 1-3 are: h, 30 m, h₂-20 m, and h, 10 m. Also, please assume that the lengths of pipes 1-3 are L₁ 1000 m, L₂ 2000 m, and L3 = 3000 m; the diameters of all three pipes are D₁ D₂ D₂ = 2.0 m; and the friction coefficients of all three pipes are f f₂=fa=0.015. If you estimate that the total head at Junction "J" is H, = 22 m please: 1) calculate the resulting net volumetric flow rate into junction "J" and 2) determine if the actual total head at junction "J" is above or below H, = 22 m. h₂ Reservoir 1 h₂ 7 Reservoir 2 Pipe D Reservoir 3 ha Pipe 3 Pipe 2 a