The three water-filled tanks shown are connected by pipes as indicated. If minor losses are neglected, determine the flowrate in each pipe. Elevation 200 m Pipe 2 D = 0.08 m € = 200 m f = 0.020 Elevation = 245 m Pipe 1 D = 0.10 m -€ = 200 m f = 0.015 Elevation = 185 m Pipe 3 D = 0.08 m ( = 400 m f = 0.020

The three water-filled tanks shown are connected by pipes as indicated. If minor losses are neglected, determine the flowrate in each pipe. Elevation 200 m Pipe 2 D = 0.08 m € = 200 m f = 0.020 Elevation = 245 m Pipe 1 D = 0.10 m -€ = 200 m f = 0.015 Elevation = 185 m Pipe 3 D = 0.08 m ( = 400 m f = 0.020

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

topic: parallel pipes hydraulics
Example 2: A flow of water from a closed reservoir with interior pressure of 50 kPa to a pipe of different diameters shown in figure below. Calculate 1) the discharge and velocity at each pipe, 2) the pressure in each pipe and 3) the .energy and hydraulic grade lines 50 kPa water 10 m D1-300mm D2-200mm D3=100mm D4-50mm (nozzel) 2m
Question 4: H₂=4 m f=0.15 D₁ = 50 mm H₁ 4 m 25 m L = 100 m A. Two tanks A and B were connected by a 50 mm-diameter pipe (f=0.15) that is 100 m in length. Calculate the total flow between the two tanks. B. A pipe of 200mm diameter (f-0.01) and length X is to be connected in series to replace X length of the 50mm pipe. If the purpose is to increase flow by 50%. Find Length X. ***** La=X f=0.01 D. = 200 mm
b3
Please answer, hydraulics. Thanks
Two pipes 1 and 2 are connected in series. Pipe 1 is 200 mm in diameter and 300 m long while pipe 2 is 250 mm in diameter and 200 m long. Determine the total head loss of the pipes in series neglecting minor losses if the discharge is 128 liters per second. Use f=0.02 for all pipes.
Determine the flow distribution of water in the system shown in Figure below. Assume constant friction factors, with f= 0.03. The head-discharge for the pump is Hp = 70 m el 50 m Pipe L (m) D (mm) ΣΚ el 48 m 1 100 750 850 350 200 200 [2] [4] 3 el 0m [5] 4 500 200 350 250 [1] [3]
Question 1: The PVC pipeline (ε = 0.0015) depicted in figure below is 150 m. Determine the diameter of the pipe that can provide a flow rate is 0.8 m³/s if the height h is 12 m. Ignore minor losses. water temperature is 4°C. U= h 497 x 10-6 (T + 42.5)1.5 2 m
Question 1: For the setup shown in the figure: H = 20 m f = 0.0012 f = 0.0012 D = 250 mm D = 80 mm L = 50 m L = 50 m f = 0.001 D₁ = 150 mm L = 100 m A. Calculate Q in the 150 mm-diameter pipe B. If the NPSHR of the pump is 3 m. Is it feasible to use the pump? You can use: Patm-101 kN/m², and Pvapor = 3.17 kN/m² H₂ = 10 m Pump Q f = 0.0012 D=80 mm L = 50 m Q₁ = 0.2
Please correct answer And solve both part
Determine the flow rate that circulates through each of the pipes in the system shown.