The three gorges dam is rated at maximum output. If its generating efficiency is 90 % and its head is S1 m what is the rate of flow in (kg/s) of water through its turbines at maximum output

At a proposed hydroelectric power plant site, the average elevation of headwater is 600m and the tailwater elevation is 480m. The average annual water flow is determined to be equal to that volume flowing through a rectangular channel 4m wide and 0.5m deep and average velocity of 5.5m/s. Assuming the plant will operate 350 days/year, find the energy kwh that the plant site can developed if the hydraulic turbine that will be used has an efficiency of 78% and generator efficiency of 90%. Consider a headwork loss of 4% of the available head.

An HES with a large water storage reservoir and a dam is operating underthe following conditions:• Number of hydro turbines n = 9• Power plant capacity factor CF = 0.62• Water flow rate Q = 125 m3/s (per turbine)• Net water head H = 490 m• Power plant overall (electrical) efficiency ηel = 0.9Determine (a) the electric power output and (b) the annual power generation of the plant.

Two reservoirs A and B have elevations of 250 m and 100 m, respectively. It is connected by a pipe having adiameter of 250 mm and a length of 100 m. A turbine, with an efficiency of 0.95, which is installed at a point inbetween A and B, is used to supply 233 kW of electric power to a nearby community. If the total head loss as watertravelled from reservoir A to B is 25 m, determine the discharge inside the pipe in liters per second.

Pls answer thank you! At a proposed hydroelectric plant site, the average elevation of headwater is 600 m, the tailwater elevation is 480 m. The average annual water flow is determined to be equal to the volume flowing through a rectangular channel 4 m wide and 0.5 m deep and average velocity of 5.5 m/sec. Assuming that the plant site can develop if the hydraulic turbine that will be used has an efficiency of 80% and generator efficiency of 92%. Consider a headwork loss of 4% of the available head. Find the annual energy produce in kW.

2.1 A hydro-electric power station has a reservoir area of 2.7 km² and a capacity of 4.6 x 106m³. The effective head of water is 100 metres. The penstock, turbine and generation efficiencies are 95%, 90%, and 85%, respectively. Instructions :round off to 2 decimal places 1. Determine the total electrical energy that can be generated from the power station (kWh). 2. Determine the depth of the reservoir (metres) 3.Determine the fall in reservoir volume level is the load of 100 kW is supplied for 5 hours (%).

Two reservoirs A and B have elevations of 250 m and 100 m,respectively. The two tanks are connected by a 250-mm diameterpipe, 250-m long, with a turbine placed along its length. If the flow ofwater in the pipe is 140 L/s and C = 120, then:Determine the power output of the turbine in kW if the efficiency ofthe turbine is 85%.

Please answer, hydraulics. Thanks

In a hydroelectric power plant, water at 4°C is supplied to the turbine at a rate of 0.58 m³/s through a 195 m-long and 0.34 m-diameter cast iron pipe, as shown in the following figure.. The elevation difference between the free surface of the reservoir and the turbine discharge is 135 m, and the combined turbine-generator efficiency is 85 percent. Disregarding the minor losses due to the large length-to-diameter ratio of the pipe, determine the electric power output of this plant. The density and dynamic viscosity of water at 4°C are p = 1,000 kg/m³ and μ = 1.6×10-³ kg/m-s, and the roughness of the cast iron pipe is & 0.00026 m. = Water 135 m 195 m 0.34 m Turbine

Complete solution and correct units pls. Thanks