The section of a reinforced concrete T-beam has d= 500mm bf = 600mm t = 100mm bw = 300mm. The beam is reinforced with 12 pieces of 28mm diameter bars with Fy = 415 MPa. Concrete strength F'c = 28 MPa. Determine the Safe Ultimate Moment Capacity of the beam.

The section of a reinforced concrete T-beam has d= 500mm bf = 600mm t = 100mm bw = 300mm. The beam is reinforced with 12 pieces of 28mm diameter bars with Fy = 415 MPa. Concrete strength F'c = 28 MPa. Determine the Safe Ultimate Moment Capacity of the beam.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A reinforced concrete beam having a width of 300mm and a overall depth of 600 mm is reinforced with 2-25mm compression bars placed 60 mm from extreme concrete & 6-25mm tension bars with concrete covering of 60 mm from the centroid of the bar group. Concrete Strength, fc' = 27 MPa, Steel Strength, fy = 415 MPa. A. Determine the balanced steel area considering the contribution of the compression steel. B. Determine the maximum tension steel area allowed by the code.
A 62.6-kN vertical load P is applied at the corner of the square cross section of the steel compression member AB, which is free at its top A and fixed at its base B. Knowing that for the grade of steel used oy=345 MPa and E= 200 GPa, and using the allowable-stress method, determine the smallest allowable dimension d. B D 1.5 m The smallest allowable dimension dis mm.
4. Find the maximum allowable value of P for the column. The cross- sectional areas and working stresses () are shown in Figure 3. 2P FIGURE 3 Steel: A=500 mm² Qw=120 MPa Timber: A=2000 mm² Ωw =12 MPa Timber: A=8000 mm² Ωw =16 MPa
A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. The concrete cover to bar centroid is 80 mm and at the bottom is 70 mm. use concrete strength f'= 21 MPa and steel yield strength fy=415 MPa for all bars. 1. Determine the tensile steel ratio when the beam is in positive bending. a. 0.01567 b. 0.01283 c. 0.01169 d. 0.01923 2. Determine the nominal moment capacity in kN-m of the beam in positive bending. a. 188.30 b.167.70 c.218.96 d.193.68 3. Determine the tensile steel ratio when the beam is in negative bending. a. 0.00406 b. 0.00475 c.0.00383 d. 0.00508 please provide a complete solution so I can understand. Very much appreciated to solve it early !!
Reinforce Concrete Design Determine the design moment capacity of the reinforced concrete beam shown inFigure 1(a) if it is reinforced with 4-28-mm diameter in tension and 2- 16-mmdiameter in compression. Use f’c = 21 MPa, fy = 276 MPa and effective cover of 50 mm for top and bottom bars.Assume the load W to be ultimate. Neglect weight of beam.
Topic: Restrained Beams 140KN 2.5m 3.5m 5KN/m 3.2m МА 6m MB 11WL2 Pab² 5WL2 Pa?b MA = - MB = - 192 L2 192 L2 INSTRUCTION: 1. Determine the maximum stress in the timber beam with the size of 120 x 370mm.
The beam is loaded uniform deadload of 42 kN/m (including its own weight), and a uniform live load of 48 kN/m. Concrete strength fc' = 21 MPa and steel yield strength fy = 415 MPa, concrete cover is 65 mm from the centroid of the bars. Assume El to be constant. 320 mm 540 mm 7m 2m a. What is the uniform factored load on the beam in kN/m? b. What is the vertical reaction (factored) at B in KN? c. What is the maximum nominal moment can the beam carry if it is to be design as singly reinforced, in kN.m? d. What is the required tension steel area in mm2, at point of maximum positive moment? e. What is the required tension steel area in mm2, at point of maximum negative moment? f. Using simplified calculation, calculate the nominal shear strength provided by concrete near the fixed end, in KN? g. Using 10 mm W-stirrups with fyh = 275 MPa, what is the required stirrup spacing near the fixed end?
Determine the maximum concrete and steel stresses at the point of maximum positive and negative moment. Fc'= 40 Mpa.
Problem The following are the dimensions of a concrete T-beam section Width of flange, bf = 600 mm Thickness of flange, tf = 80 mm Width of web, bw = 300 mm Effective depth, d = 500 mm The beam is reinforced with 3-32 mm diameter bars in tension and is carrying a moment of 100 kN.m. Find the total compressive force in the concrete. Use n = 9.
Situation #1: A reinforced concrete beam has a width of 300 mm and an overall depth of 550 mm. The beam is reinforced with five 25-mm diameter bottom bars and two 16-mm-diamter bars, both having fy = 345 MPa. Concrete strength fc' = 24 MPa. The centroid of the bars are located 65 mm from extreme concrete fibers. Unit weight of concrete = 23.5 kN/m3. The beam is simply supported over a span of 6 m and carries a superimposed deadload of 8 kN/m. Use NSCP 2010 1.1 What is the depth of compression block? 1.2 What is the stress of the compression steel? 1.3 What is the nominal capacity of the beam? 1.4 What safe uniformly distributed live load can the beam carry over its entire length? 1.5 Using the loads obtained from the previous questions, what is the required nominal shear strength of the beam at critical section near the support? 1.6 Using 10 mm U stirrups with fy = 275 MPa, what is the required stirrup spacing near the support.
Situation #3: Given is a rectangular beam having the following parameters; d = 490 mm d' = 60 mm b = 300 mm fc' = 27.6 MPa fy = 276 MPa Mu = 620 kN.m %3D 10 نقاط Compute for the required steel 3.1 area in the compression side إجابتك ibäi 12 Compute for the required steel 3.2 * area in the tension side