The critical slope is the slope that will maintain a uniform and critical flow in a canal with constant discharge. When the discharge of the canal is 11 cms, width of 6 m, side slope, z = 2 and n = 0.025, the critical slope is

The critical slope is the slope that will maintain a uniform and critical flow in a canal with constant discharge. When the discharge of the canal is 11 cms, width of 6 m, side slope, z = 2 and n = 0.025, the critical slope is

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The normal depth of flow in a rectangular channel (2 m deep and 5 m wide) is 1 m. It is laid to a slope of 1 m/km with a Manning’s n = 0.02. Some distance downstream there is a hump of height 0.5 m on the stream bed. Determine the depth of flow (y1) immediately upstream of the hump.
A 5 m wide rectangular channel carries a discharge of 16 m3/s. Manning's roughness coefficient for the channel is 0.012. The slope of channel bottom is 0.006. The depth of flow in channel required is decimal places) to carry the given discharge. Considering it is a wide channel. (in m, round off to two
Find slope require to sustain flow.,
The slide slope of a trapezoidal open channel are 1 horizontal to 1.75 vertical. The bottom width is 2.5 m and the depth flow is 3m. The coefficient of roughness n=0.015 and the slope of the channel bed is 0.0004. Calculate the velocity of flow using Manning's formula
Q5/A Triangular open channel. The available data are: Q = 13.5 (m³/s) v = 1 (m/s) n = 0.025 So = 0.0001 Z = 1.5 F.B = 0.8 (m) Find: Depth of water in the channel y. Width of the channel at the level of ground surface Wr.
A concrete channel with trapezium cross-sectional shape, conveys water at 40 m³/s. The base width of the channel is 4m and it has side slopes of 1:1. Calculate the normal flow depth on a longitudinal slope of 16 meters in 10 000 meters and use a manning roughness coefficient of 0,017.
A trapezoidal channel having side slopes of 1:1 and bed slope of 1 in 805 is required to carry a discharge of 0.001242 m3/min. Find the dimensions of the channel for minimum cross-section. Take Chezy’s constant as 50.
Question 21 of 23 An open channel is to be designed to carry 1 m3/s at a slope of 0.0065. The channel material has n = 0.011. What is the optimum depth for a rectangular section? Select the correct response: 0.48 0.46 0.43 0.69
Please solve quickly For an irrigation project, you need to design an irrigation channel to convey water with a given flowrate. The water depth in the channel is 1.5 m. The channel has a trapezoidal cross-section and its slope is J0=0.001 and its roughness coefficient is n =0.015. Determine the base width of the channel in m.
2. A 1.50 m diameter circular channel flowing at maximum velocity is to be replaced by a trapezoidal channel of the most efficient section with one side slope at 2V:3H and the other at 4V:3H. The two channels have the same longitudinal slopes of 0.010 and the same roughness coefficient, n = 0.030. Determine the dimensions of the trapezoidal channel using Manning's equation. need complete solution with illustrations
A trapezoidal channel having side slopes of 1:1 and bed slope of 1 in 845 is required to carry a discharge of 211.25m3/min. Find the dimensions of the channel for minimum cross-section. Take Chezy’s constant as 50
An earth canal in good condition having a bottom width of 4 meters an slide slopes of 2 horizontal to 1 vertical is carrying water at a depth of 2 m. The slope of the canal is 0.0002. Determine the discharge using n = 0.020.a. 13.06 m3/sb. 12.56 m3/sc. 10.56 m3/sd. 14.89 m3/s