The composite wall of an oven consists of three materials, with thermal conductivity, KA = 20 W/ m. kg = 30 W/ m. K, kc = 50 W/m. K, and known thickness, LA =30 cm, , LB =20 cm and Lc = 15 cm. Under steady- state operating conditions, measurements reveal an outer surface temperature of Tso =20°C, an inner surface temperature of Tsi = 600°C. The inside and outside convection coefficients are 25 W/m2. K and 15 W/m2. K. The wall repeats itself every 25 cm distance in the vertical direction and if the wall is 1-m deep and 0.25-m high, then assume an area of 0.25m2 for all your calculations. Find the total resistance. T. G00°c T 20°C Ke Air T, h

The composite wall of an oven consists of three materials, with thermal conductivity, KA = 20 W/ m. kg = 30 W/ m. K, kc = 50 W/m. K, and known thickness, LA =30 cm, , LB =20 cm and Lc = 15 cm. Under steady- state operating conditions, measurements reveal an outer surface temperature of Tso =20°C, an inner surface temperature of Tsi = 600°C. The inside and outside convection coefficients are 25 W/m2. K and 15 W/m2. K. The wall repeats itself every 25 cm distance in the vertical direction and if the wall is 1-m deep and 0.25-m high, then assume an area of 0.25m2 for all your calculations. Find the total resistance. T. G00°c T 20°C Ke Air T, h

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q.3) The two sides of a large plan wall are maintained at constant temperatures of T₁ = 120°C and T₂ = 50°C, respectively. If you know that the wall thickness L= 0.2 m, thermal conductivity k = 1.2 W/m.K, and surface area A = 15 m². Determine (a) the variation of temperature within the wall and the value of temperature at x = 0.1 m and (b) the rate of heat conduction through the wall under steady conditions.
A temperature difference of 85oC exists across a fibreglass insulation layer 13 cm thick, for which k = 0.035 W/mK. Calculate the heat transferred through the fibreglass per hour per unit area.
Consider a wall that is 5 m high, 8 m long, and 0.22 m thick. The thermal conductivities of the various materials used, in W/m °C, are kA = kF = 2, kB = 8, kC = 20, kD = 15 and kE = 35. The left and right surfaces of the wall are maintained at uniform temperatures of 300 °C and 100 °C, respectively. If the heat transfer through the wall is one-dimensional, determine (a) the rate of heat transfer through the wall; b) the temperature at the point where sections B, D, and E meet, and c) the temperature drop across section F. Disregard any contact resistances between the interfaces.
2. A steel plate of k=50w/mk and thickness 10cm passes a heat flux by conduction of 25kW/m² . If the temperature of hot surface of plate is 100C, then what is the temperature of the cooler side of plate?
Q5B) A steel pipe of 170 mm inner diameter and 190 mm outer diameter with thermal conductivity 55 W/m. K is covered with two layers of insulation. The thickness of first layer is 25 mm (k = 0.1 W/m. K) and second layer thickness is 40 mm (k = 0.18 W/m.K). The temperature of steam and inner surface of steam pipe is 320 °C and outer surface of insulation is 80 °C. Ambient air temperature is 25 °C. The surface coefficient for inside and outside surfaces are 230 W/m². K and 6 W/m². K respectively. Determine the heat loss per meter length of steam pipe and layer of contact temperatures and also calculate overall heat transfer coefficient.
Q2/ A plane wall (K =17 W/m.°C ) with (60 mm) thick. Both sides of the wall are insulated with ( 2 cm) layer of insulating material having (K=0.22 W/m.°C ) The heat transfer coefficient, considering convection on both sides of wall are ( 120 and 10 W/m.°C ) respectively. Calculate the heat transfer per unit area if the temperature difference across the wall is (90 °C).
Q.3) The two sides of a large plan wall are maintained at constant temperatures of T₁ = 120°C and T₂ = 50°C, respectively. If you know that the wall thickness L = 0.2 m, thermal conductivity k = 1.2 W/m.K, and surface area A = 15 m². Determine (a) the variation of temperature within the wall and the value of temperature at x = 0.1 m and (b) the rate of heat conduction through the wall under steady conditions. (10 Pts)
2. A glass window has an area of 5.5 ft² and a thickness of 5 mm. If one side is at a temperature of 45° F and the other is at 23 F, how much thermal energy (BTU/year) flows through the window in one year? The thermal conductivity of glass is 1.89x10-4 kcal/m-s-K.
Please include a fbd of the problem
3 Brass cube "p = 8530 kg/m , c= side length =9 mm, are annealed by heating them first to 813°C in a furnace and then allowing them to cool slowly to 130°C in ambient air at 28°C. If the average heat transfer coefficient is 19.9 W/m .°C, If 2204 balls are to be annealed per hour, what is the total rate of heat transfer (watts) from the balls to the ambient air? 380 J/kg.°C, k = 110 W/m.°C, a = 33.9E-6 W/m.°C",
We have a wall (k = 10 W/mK) with a thickness of 0.4 m. At a certain instance of time temperature distribution is given by T(x) = 50 x²– 450 x + 350. a- Please calculate the rate of heat transfers entering and leaving the wall for a unit surface area and also find the change in the energy storage of the wall. b- If the environment temperature is 85 °C, what is the convection coefficient between the cold surface of the wall and environment.
I need complete solutions and 4 decimal places in all solutions.