The composite shaft shown consists of a 5-mm-thick brass jacket (Gbrass = 39 GPa) bonded to a 40-mm-diameter steel core (Gsteel = 77.2 GPa). Knowing that the shaft is subjected to a 600 N·m torque, determine a) the maximum shearing stress in the brass jacket, b) the maximum shearing stress in the steel core, and c) the angle of twist of B relative to A.

The composite shaft shown consists of a 5-mm-thick brass jacket (Gbrass = 39 GPa) bonded to a 40-mm-diameter steel core (Gsteel = 77.2 GPa). Knowing that the shaft is subjected to a 600 N·m torque, determine a) the maximum shearing stress in the brass jacket, b) the maximum shearing stress in the steel core, and c) the angle of twist of B relative to A.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A circular aluminum alloy [E = 70 GPa; a = 22.5 × 10-6/°C; v = 0.33] pipe has an outside diameter of 215 mm, a wall thickness of 12 mm, and a length of 4.3 m. The pipe supports a compressive load of 695 kN. After the temperature of the pipe drops 43°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) ō = i AD = i mm mm
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of 270 mm, a wall thickness of 15 mm, and a length of 5.5 m. The pipe supports a compressive load of 635 kN. After the temperature of the pipe drops 45°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = i AD= i mm mm
QU A composite beam is fabricated by bonding a steel bar and a brass bar and is subjected to the bending moment M = 200 N-m. Determine the maximum bending stress in the brass and steel. Given: E, =200 GPa, E, = 100 GPa Brass 20 }o | Jakrtal
STRAIN
Determine the maximum tensile stress in the beam shown.
A rectangular plate is subjected to uniform biaxial stress with x = 90 MPa (tension), oy = -20 MPa (compression), and ₂ = 0. The plate has original dimensions 400 X 800 X 200 mm (x X y X z) and is made of steel with E = 200 GPa and v = 0.3. What are the strains Ex, Ey, and Ez?
3. Determine the stress in each of the two vertical rods if the temperature rises 50 °C after the load P=75 KN is applied. Neglect the deformation and mass of the horizontal bar AB. Use Ea = 75 GPa, as=23.0 um/m-°C, Aa = 850 mm2 Es = 210 GPa, as = 11.9 um/m-°C and As = 650 mm² . %3D %3D Steel Aluminum 3m 2.5m 3 m 3 m 3 m 75 KN
The composite beam is made of steel (A) bonded to brass (B) and has the cross section shown. It is subjected to a moment of M = 6.3 kN?m .Ebr = 100 GPa, Est = 200 GPa A: Determine the maximum bending stress in the brass. B:Determine the maximum bending stress in the steel. C: Determine the stress in the brass at the seam where the brass and steel are bonded together. D:Determine the stress in the steel at the seam where the brass and steel are bonded together. B M 175 mm 150 mm 200 mm
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v=0.33] pipe has an outside diameter of 225 mm, a wall thickness of 15 mm, and a length of 5.0m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 48°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = mm AD= i mm
i need the answer quickly
d(mm)=65 T(nm)=1500 Gst(Gpa)=70
Determine (d) variable stress and (e) design factor