The air conditioner in a car uses R-134a and the compressor power input is 1.5 kW bringing the R-134a from 201.7 kPa to 1200 kPa by compression. The cold space is a heat exchanger that cools atmospheric air from the outside 30°C down to 10°C and blows it into the car. What is the mass flow rate of the R-134a and what is the low temperature heat transfer rate. How much is the mass flow rate of air at 10°C? Standard Refrigeration Cycle Table B.5: h₁ = 392.28 kJ/kg; s₁=1.7319 kJ/kg K, ha-hy=266 kJ/kg

The air conditioner in a car uses R-134a and the compressor power input is 1.5 kW bringing the R-134a from 201.7 kPa to 1200 kPa by compression. The cold space is a heat exchanger that cools atmospheric air from the outside 30°C down to 10°C and blows it into the car. What is the mass flow rate of the R-134a and what is the low temperature heat transfer rate. How much is the mass flow rate of air at 10°C? Standard Refrigeration Cycle Table B.5: h₁ = 392.28 kJ/kg; s₁=1.7319 kJ/kg K, ha-hy=266 kJ/kg

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

This is the third part of a three-part question. A 4 hp pump is used to pump water. The water enters the pump at 100 kPa and 15°C and exits the pump at 300 kPa. What is the maximum mass flow rate the pump can deliver?
A commercial airliner is flying at an altitude where the temperature and pressure of the air are -50°C and 26.5 kPa. An engine-driven compressor will take this air at T= -50°C, P₁ = 26.5 kPa and compress it to P₂ = P₂ = 85.0 kPa to pressurize the cabin. The air will be very hot when it exits the compressor, so a heat exchanger will be used to cool the air to T, = 20°C before it enters the cabin. Cold air at T₁ = -50°C will be used in the heat exchanger to cool the cabin air, and this air will exit the heat exchanger at T = 20°C (this air will be used to heat the cargo bay). The mass flow rate of the air delivered to the cabin is 0.80 kg/s and the compressor efficiency is 75%. Model the air as an ideal gas having constant specific heat, using 300 K values from Cengel's tables posted on Canvas. a) Find the actual temperature of the air exiting the compressor and the power input to the compressor (answers: 67.6°C and 94.5 kW). b) Find the rate of heat transfer in the heat exchanger and…
Refrigerant 134-a enters the evaporator coils placed at the back of the freezer section of a household refrigerator at 100 kPa with quality of 20 percent and leaves at 100kPa and -26 C as shown in Figure 2. If the compressor consumes 600 W of power and the COP of the refrigerator is 2.2 determine: The mass flow rate of the refrigerant The rate of heat rejected to the kitchen air la Condenser W. Expansion valve 100 kPa -0.2 Compressor Evaporator e 100 kPa 260
An ammonia refrigeration compressor takes its suction from the evaporator at a temperature of -20oF (-28.9oC) and a quality of 95%. The compressor discharges at a pressure of 100 psi (689.5 kPa), liquid ammonia leaves condenser at 50oF (10oC). Properties of Ammonia: At 689.6 kPa (Tsat = 13.3oC) h = 1,568 kJ/kg; s = 5.7676 kJ/kg.K At 10oC: hf = 246.531 kJ/kg At -28.9oC by interpolation hf = 68.5 kJ/kg; hg = 1424.5 kJ/kg sf = 0.49366; sg = 6.0452 Determine the quality of refrigerant upon entering to the evaporator.
In order to maintain the temperature of the house at 20oC they would need 10 kW when the outside temperature is 273 K. This heat flow is usually obtained directly by burning gas or oil. Calculate the power required if the 10 kW heat flow were supplied by operating a reversible engine with the house as the upper reservoir and the outside surroundings as the lower reservoir so that the power was used only to perform work needed to operate the engine
An ammonia refrigeration compressor takes its suction from the evaporator at a temperature of -20oF (-28.9oC) and a quality of 95%. The compressor discharges at a pressure of 100 psi (689.5 kPa), liquid ammonia leaves condenser at 50oF (10oC). Properties of Ammonia: At 689.6 kPa (Tsat = 13.3oC) h = 1,568 kJ/kg; s = 5.7676 kJ/kg.K At 10oC: hf = 246.531 kJ/kg At -28.9oC by interpolation hf = 68.5 kJ/kg; hg = 1424.5 kJ/kg sf = 0.49366; sg = 6.0452Find the horsepower per ton of refrigeration. a. 1.044 b. 0.987 c. 1.404 d. 0.897
A power plant having a Carnot efficiency produces 1000MW of electrical power from turbines that take in steam at 546.4K and eject water at 301.2 K into a flowing river. The water downstream is 6.4C warmer due to the power plant. What is the flow rate (kg/s) of the river?
The temperature inside a kitchen freezer is a constant 256 K, while the temperature of the air in the kitchen is a constant 302 K. The freezer's insulation is imperfect, and it conducts energy into its interior at a rate of 0.150 W. Assuming the freezer can be approximated as ideal (operating in a Carnot cycle), what is the average power required by the freezer's motor to maintain the constant interior temperature? W Need Help? Read It DETA LC
A heat pump is used for warming a house during winter and cooling it over summer. The temperature inside the house is set to 19o C during winter and 24o C during summer. The heat is transferred through the house walls and is estimated to be 2200 kJ/hro C. During winter, the outside temperature is 2o C. What is the maximal power required to operate the pump engine? Using the maximal power obtained for (a) to cool down the house during summer. If the house temperature should be maintained on 24o C, what will be the maximum temperature outside?
An ammonia refrigeration compressor takes its suction from the evaporator at a temperature of -20oF (-28.9oC) and a quality of 95%. The compressor discharges at a pressure of 100 psi (689.5 kPa), liquid ammonia leaves condenser at 50oF (10oC). Properties of Ammonia: At 689.6 kPa (Tsat = 13.3oC) h = 1,568 kJ/kg; s = 5.7676 kJ/kg.K At 10oC: hf = 246.531 kJ/kg At -28.9oC by interpolation hf = 68.5 kJ/kg; hg = 1424.5 kJ/kg sf = 0.49366; sg = 6.0452Find the COP. a. 4 b. 4.25 c. 5 d. 5.25
A high pressure steam turbine receives steam from a boiler under unknown conditions. The isentropic efficiency of the turbine is 75% and it produces 1MW. The high pressure turbine outlet steam is at 1.4 MPa under saturated conditions. The high pressure turbine exhaust supplies 1000kg/min for use in a process, in addition to an unknown flow of steam that follows the path, being supplied to a low pressure turbine that produces 820kW when it releases steam at 10kPa and has a isentropic efficiency of 60%. The steam that was used for the process (out of the high pressure turbine) after being used, returns to the cycle taken by the pump, which also takes the outlet of the condenser and does so at 10kPa as saturated liquid. Consider the efficiency of the pump equal to 90%. Determine: A) the mass flow through the boiler B) the pressure and temperature at the outlet of the boiler C) the thermal efficiency of the cycle
An electric water heater is fed with an input stream of 15.0 kg/min of water at 17.5°C. Hot water is then provided as two different output streams, one at 43.0°C and the other at 60.0°C. The volume of the water in the tank remains constant and the mass flowrate of the outlet stream at 43.0°C is 10.5 kg/min. Perform the following activities, i. Draw a detailed flowchart for this process with all given information. ii. Calculate the power, Q (in kW) that the electric heater must provide in order to keep the temperatures of the outlet streams at 43.0°C and at 60.0°C, respectively. You must write the mass and energy balances and show your calculation. Given: AH + AĖK + AĖ, = Q – W, where AH stands for the difference in enthalpy; ΔΗ- ΣΗoal -ΣΗit ial s As AH = H; – H,ref = mC,(T; – Tref), if the reference temperature Tref is selected as 0°C, the absolute enthalpy is given by AH¡ = H¡ = mC,T- %3D - %3D k] The specific heat of water is constant and is 4.182 within the range of kgºC temperature…