Steam enters a turbine stage with pressure of 5 bar, specific volume of 0.125m3/kgm and an enthalpy of 3620 kJ/kgm at 75 m/s and leaves the same stage with pressure of 1200 mm Hg, specific volume of .0345 m3/kgm and an enthalpy of 2800 kJ/kgm at 128m/s. Calculate the work

Steam enters a turbine stage with pressure of 5 bar, specific volume of 0.125m3/kgm and an enthalpy of 3620 kJ/kgm at 75 m/s and leaves the same stage with pressure of 1200 mm Hg, specific volume of .0345 m3/kgm and an enthalpy of 2800 kJ/kgm at 128m/s. Calculate the work

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A reversible non-flow process occurs from which the work is 9.4 BTU. If the pressure varies as P = -V² + (100/V), psi (where V is in ft³), and P₁ 46 psi, determine P2 in psi.
Steam enters a turbine through a duct with a diameter of 0.5 m at 10 MPa , 600 °, and 100 m/s. It exits the turbine through a duct with a diameter of 1 m at 400 kPa and 200 Part A For steady state operation, determine the exit velocity. Express the exit velocity in meters per second to three significant figures. ΑΣφ vec ? V2 = m/s Submit Request Answer Part B Determine the mass flow rate of steam through the turbine. Use the PC flow-state TESTcalc to obtain the density of steam at the inlet and exit ports. Express the exit velocity in kilograms per second to four significant figures. ΑΣφ več ? kg/s Submit Request Answer Part C What-if scenario: What is the exit velocity if the exit area is equal to the inlet area? Express the exit velocity in meters per second to six significant figures. ΑΣφ vec ? Submit Request Answer
I3
Refrigerant -134 a enters the evaporator of a refrigerator as saturated vapor at −20∘ C and leaves at −10∘ C and 100 kPa. The volumetric flow rate at the inlet is 0.25 m 3/s Calculate the mass flow rate.
9. Steam enters a turbine stage with an enthalpy of 3628 kJ/kg at 70 m/s and leaves the same stage with an enthalpy of 2846 kJ/kg and velocity of 124 m/s. Calculate the work done by the steam in kJ/kg.
Questions 3 and 4 refer to the following situation. Air flows into the duct of air-conditioner at 101 kPa and 12° C at a rate of 17 m³/min. The diameter of the duct is 26 cm and heat is transferred to the air in the duct by the air-conditioner at a rate of 3 W. 3. The speed (rounded to two decimal places) of the air as it enters the duct is equal to: (a) 6, 15 m/s (b) 4,87 m/s (c) 4,44 m/s (d) 5,34 m/s (e) 7,75 m/s 4. The temperature (rounded to two decimal places) of the air as it exits the duct is equal to: (a) 20,96° C (b) 20,35° C (c) 20,76° C (d) 20,83° C (e) 20,51° C
Q8. A gas enter a turbine with a velocity of 300 m/s and a temperature of 527 °C and specific internal energy of 688 kJ/kg and density of 2.7 kg/m³ . The gas expand adiabatically from a pressure of 620 kN/m² to 130 kN/m² .The gas leaves the turbine with velocity of 150 m/s. Determine the power output from the turbine in kilowatt. Take the mass flow rate of 4 kg/s. 00 limite through ongine Qvel 300 °C ond 50 9C tho hoot roiootod tompooretur
Do it fast
Ten lbm per min of fluid is handled in a reversible steady flow manner by a thermodynamic system located where the local g = 32 ft/s2. For the liquid, p1 = 20 psia, p2 = 80 psia, ρ1= 1.6 lbm/ft3, ρ2 = 0.32 lbm/ft3, v1 = 400 ft/s, v2 = 600 ft/s, u1 = 130 BTU/lbm, u2 = 130 BTU/lbm. During passage through the system, the fluid rejects 50 BTU/s as heat and rises 175 ft in elevation. During passage through the system, the fluid rejects 50 Btu/s as heat and rises 175 ft in elevation. Determine the work in the system, in BTU. Select one: a. – 675.2 b. – 781.8 c. 892.6 d. 987.4
Steam (H2O) enters a turbine at 35 m/s and specific enthalpy of 3500 kJ/kg. Thesteam leaves the turbine as a mixture of vapor and liquid having a velocity of 60m/s and a specific enthalpy of 2400 kJ/kg. If the flow through the turbine is steady,adiabatic, and changes in elevation are negligible, calculate the work output per unitmass (kJ/kg) for the turbine.
I am only interested in part 6-27(a). I see that Bartleby has answered this question before but I have a question regarding the yielding factor of safety. Why is the yielding factor of safety calculated as ( n=Sy/sigma_max), but not as ( n=Sy/Kf*sigma_max)? Since there is stress concentration factor.