[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCI, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? A 633.43 ppm CaCO3 B) 644.11 ppm CaCO3 (c) 626.71 ppm CaCO3 D 637.27 ppm CaCO3

[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCI, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? A 633.43 ppm CaCO3 B) 644.11 ppm CaCO3 (c) 626.71 ppm CaCO3 D 637.27 ppm CaCO3

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

COMPLEXOMETRIC TITRATION A deep well sample of 100 mL was titrated with 0.010 M EDTA at pH=10 (with Mg-EDTA-PH10 reagent) and consumed 31.95 mL using EBT indicator. Titration of another 100 mL of the same deep well sample with the same titrant but the pH was adjusted to 12.10 and murrexide as indicator consumed 24.25 ml to reach end point. Calculate: А. Total Hardness of water as CaCO3 В. ppm of Ca and Mg 76
The titration of an unknown weak acid with 0.10M NaOH is carried out and the pH at the equivalence point was found to be 8.50. Which indicator is best suited for the analyte? pKa=4.2 a. phenolphthalein pKa=9.7 b. methyl red pKa=5.0 c. methyl orange pKa=4.2 d. cresol purple pKa=8.3
A 370.00 mL solution of 0.00190 M AB5 is added to a 200.00 mL solution of 0.00165 M CD2. What is pQsp for AD5?
A 1.000 mL aliquot of a solution containing Cu²+ and Ni²+ is treated with 25.00 mL of a 0.03703 M EDTA solution. The solution is then back titrated with 0.02138 M Zn²+ solution at a pH of 5. A volume of 22.13 mL of the Zn²+ solution was needed to reach the xylenol orange end point. A 2.000 mL aliquot of the Cu²+ and Ni²+ solution is fed through an ion-exchange column that retains Ni²+. The Cu²+ that passed through the column is treated with 25.00 mL of 0.03703 M EDTA. This solution required 18.53 mL of 0.02138 M Zn²+ for back titration. The Ni²+ extracted from the column was treated witn 25.00 mL of 0.03703 M EDTA. How many milliliters of 0.02138 M Zn²+ is required for the back titration of the Ni²+ solution? volume: mL
The % (w/w) I- in a 0.6712-g sample was determined by Volhard titration. After adding 50.00 mL of 0.05619 M AgNO3 and allowing the precipitate to form, the remaining silver was back-titrated with 0.05322 M KSCN, requiring 35.14 mL to reach the endpoint. Report the %(w/w) I- in the sample. [Ans. 17.76 % (w /w)]
Calculate the final concentration of citrate buffer in a test tube containing the following components: 250 µl of 25 mM p-nitrophenol phosphate, 100 µL 0.5 mg.ml-1 acid phosphatase and 150 µl 100 mM citrate buffer pH 4.8. Provide the answer together with unit in the answer box.
A 340.00 mL solution of 0.00175 M AB2 is added to a 140.00 mL solution of 0.00235 M CD4. What is pQsp for AD2?
SO3 + H20 by titration with permanganate in acidic pH: peroxide was diluted to 25 ml and analyzed The sample required 84.2 mL of 0.0175 M permanganate to reach the concentration of hydrogen peroxide in the original sample? 04+H202 →02 + Mn2+ NT COPY NRSITY What is the GE