Sportway Inc. produces high-quality tennis racquets and golf clubs using a patented forming process and high-quality hand-finishing. Products move through two production departments: Forming and Finishing. The company uses departmental overhead rates to allocate overhead costs. Overhead is allocated based on machine-hours in Forming and direct labour cost in Finishing. Information related to costs for last year is provided below: Annual production and sales (units) Direct materials cost per unit Direct labour cost per unit: Forming Department Finishing Department Machine-hours per unit: Forming Department Finishing Department Tennis Golf Racquets Clubs 6,800 10,700 $ 5.10 $ 4.20 $7.00 $ 6.50 $6.00 $ 7.00 0.25 0.00 0.25 0.50 In addition, the firm budgets manufacturing overhead at $62,750 in the Forming Department and $64,500 in the Finishing Department. Determine the total cost per unit of tennis racquets and golf clubs.
Q: Greenwood Company manufactures two products—15,000 units of Product Y and 7,000 units of Product Z.…
A: In this question, we have to find out the activity cost setup .
Q: Mack Precision Tool and Die has two production departments, Fabricating and Finishing, and two…
A: Cost allocation is the process using which the costs of different departments or the common costs of…
Q: Mirkle Corporation uses the following activity rates from its activity-based costing to assign…
A: Under activity based costing, overhead cost assigned to products on the basis of activity consumed…
Q: Greenwood Company manufactures two products—15,000 units of Product Y and 7,000 units of Product Z.…
A: Activity rate per machining cost pool =Total Estimated machining setup cost/Expected Activity =…
Q: Required: a. Compute the profit or loss for each product using plantwide allocation. b. The new CFO…
A: Introduction:- The plantwide overhead rate formula is the estimated manufacturing overhead cost…
Q: Greenwood Company manufactures two products—15,000 units of Product Y and 7,000 units of Product Z.…
A: The Activity based costing is the modern technique to assign cost to various activities. The cost of…
Q: University Printers has two service departments (Maintenance and Personnel) and two operating…
A: The question is related to the Allocation of services department overheads to operating department…
Q: Activity-Based Costing Slack Corporation has the following predicted indirect costs and cost drivers…
A: Predetermined Overhead Rate:— It is the rate used to allocate manufacturing overhead cost to cost…
Q: Koontz Company manufactures two models of industrial components—a Basic model and an Advanced Model.…
A: 3. a. Activity rate for each activity: Activity cost pool Manufacturing Overhead Total activity…
Q: Kingsport Containers Company makes a single product with wide seasonal variations in demand. The…
A: Since you have posted a question with multiple sub parts, we will provide the solution only to the…
Q: Orear Corporation manufactures two products: Product Z34D and Product J25M. The company uses a…
A: Traditionally the overhead cost is allocated on the bases of plantwide overhead rates. The activity…
Q: Greenwood Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z.…
A: Activity-based costing (ABC): It is a costing method in which overhead and indirect costs are…
Q: Hickory Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z.…
A: Activity based costing:Which is one of the methods used for the purpose of allocating overheads to…
Q: Greenwood Company manufactures two products—14,000 units of Product Y and 6,000 units of Product Z.…
A: ACTIVITY BASED COSTINGActivity Based Costing is a powerful tool for measuring…
Q: Moore Hardware mass produces hardware products such as hammers, screwdrivers, etc. They have a one…
A: In process costing, the notion of equivalent unit of production (EUP) is used to translate the…
Q: Madison Enterprises manufactures and sells two types of dump trucks, Standard and Economy. The…
A: Overhead costs means all type of indirect costs and expenses being incurred in business. These costs…
Q: The Sit-N-Spin Corporation manufactures and assembles office chairs. Sit-N-Spin uses an…
A: The allocation base for materials handling is the number of parts used by a chair. As per the data,…
Q: Greenwood Company manufactures two products—15,000 units of Product Y and 7,000 units of Product Z.…
A: Activity-based costing (ABC) system Activity-based costing is the most commonly used method of…
Q: Lens Care Inc. (LCI) manufactures specialized equipment for polishing optical lenses. There are two…
A:
Q: Archie Corporation uses the following activity rates from its activity-based costing to assign…
A: Any operational costs that are listed in a company's income statement but are not directly related…
Q: The Sit-N-Spin Corporation manufactures and assembles office chairs. Sit-N-Spin uses an…
A: Overheads are considered as fixed and common expenses that should be allocated to the products on…
Q: Maxey & Sons manufactures two types of storage cabinets-Type A and Type B-and applies manufacturing…
A: "Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…
Q: Greenwood Company manufactures two products—13,000 units of Product Y and 5,000 units of Product Z.…
A: Introduction:Activity-Based Costing (ABC) is a cost accounting method that assigns costs to products…
Q: Koontz Company manufactures two models of industrial components—a Basic model and an Advanced Model.…
A: Solution 2-a: Computation of Departmental predetermined Overhead Rate Molding Assembly and…
Q: Lens Care Inc. (LCI) manufactures specialized equipment for polishing optical lenses. There are two…
A: The question is based on the activity-based costing of cost accounting.
Q: Carter Company manufactures two products, Deluxe and Regular, and uses a traditional two-stage cost…
A: A single volume-related cost driver, such as machine hours, direct labor hours, or units produced,…
Q: Custom Furniture Inc. uses an activity-based costing system. The company has provided the following…
A: The objective of the question is to calculate the overhead costs allocated to job #450 for each…
Q: West State Furniture (WSF) manufactures desks and desk chairs using two departments within a single…
A: Predetermined Overhead Rate :— It is the rate used to allocate manufacturing overhead cost to cost…
Q: Lovell Equestrian Gear utilizes an activity based costing system for allocating overhead costs. The…
A: To calculate the total applied manufacturing overhead costs, we need to multiply the actual activity…
Q: lawless Cosmetic Company manufactures and distributes several different products. The company…
A: The question is based on the concept of Cost Accounting.In order to calculate the total product cost…
Q: Logan Products has two production departments-assembly and finishing. These are supported by two…
A: here's a brief explanation of each of these cost allocation methods:Direct Method: The direct method…
Q: Greenwood Company manufactures two products—14,000 units of Product Y and 6,000 units of Product Z.…
A: The overhead is assigned to the production on the basis of the pre-determined overhead rates. The…
Q: Moore Hardware mass produces hardware products such as hammers, screwdrivers, etc. They have a one…
A: Process costing is a method of costing used to determine the cost of producing identical or similar…
Q: Use the following information for the Exercises below. Textra produces parts for a machine…
A: The overhead rate is calculated as estimated overhead cost divided by estimated base activity.
Q: es Corporation manufactures two products: Product O95C and Product M31N. The company uses a…
A: Solution: Under Activity based costing system, difference activities overhead cost are applied to…
Q: Basic Advanced Total
A: We'll answer the first question since the exact one wasn't specified. Please resubmit the question a…
Q: Bag Ladies, Inc. manufactures two kinds of bags—totes and satchels. The company allocates…
A: Total Direct labor cost = (Direct labor cost per unit of Totes x Number of units of Totes) +…
Q: Hakara Company has been using direct labor costs as the basis for assigning overhead to its many…
A: ACTIVITY BASED COSTINGActivity Based Costing is a Powerful tool for measuring…
Q: Greenwood Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z.…
A: Plantwide Overhead Rate :— It is the rate used to allocate manufacturing overhead cost to cost…
Q: Koontz Company manufactures two models of industrial components-a Basic model and an Advanced Model.…
A: "Since you have posted a question with multiple sub parts, we will solve first three sub parts for…
Q: Greenwood Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z.…
A: Solution.. Inorder to assign the manufacturing overhead cost to Product Y first of all we need…
Q: Carter Company manufactures two products, Deluxe and Regular, and uses a traditional two-stage cost…
A: Activity-Based Costing (ABC) is a costing methodology that assigns overhead costs to specific…
Q: Thornton Corporation's computer services department assists two operating departments in using the…
A: Allocating the cost of computer services to operating departments will be done in the raio of 37:25…
Q: The Sit-N-Spin Corporation manufactures and assembles office chairs. Sit-N-Spin uses an…
A: Different costs to production are allocated on the basis of different variables, accordingly costs…
Q: How many parts must be removed from B-13 in order to achieve the target cost for B-13 (round up to…
A: There has been a decrease in market price. So the cost has to be decreased by the same amount to…
Q: Maxey & Sons manufactures two types of storage cabinets-lype A and lype B-and applies manufacturing…
A: Unit Manufacturing Cost:Unit manufacturing cost can be calculated by adding the direct material…
Q: Maxey & Sons manufactures two types of storage cabinets-Type A and Type B-and applies manufacturing…
A: Activity-based costing (ABC) is a refinement of the traditional overhead cost allocation system,…
Unlock instant AI solutions
Tap the button
to generate a solution
Click the button to generate
a solution
- Maxey & Sons manufactures two types of storage cabinets—Type A and Type B—and applies manufacturing overhead to all units at the rate of $120 per machine hour. Production information follows. Type A Type BAnticipated volume (units) 24,000 45,000 Direct-material cost per unit $ 28 $ 42 Direct-labor cost per unit 33 33 The controller, who is studying the use of activity-based costing, has determined that the firm’s overhead can be identified with three activities: manufacturing setups, machine processing, and product shipping. Data on the number of setups, machine hours, and outgoing shipments, which are the activities’ three respective cost drivers, follow. Type A Type B TotalSetups 140 100 240 Machine hours 48,000 67,500 115,500 Outgoing shipments 200 150 350 The firm’s total…Logan Products has two production departments-assembly and finishing. These are supported by two service departments-sourcing (purchasing and handling of materials and human resources) and operations (work scheduling, supervision, and inspection). Logan has the following labor hours devoted by each of the service departments to the other departments. Sourcing Operations Sourcing 10,000 The costs incurred in the plant are as follows: Departments Sourcing Operations Assembly Finishing Total a Direct Method Assembly Finishing Step Method Assembly Finishing c. Reciprocal Method Total Labor Hours Used by Departments Operations 20,000 b. Assembly Finishing Departmental Costs $ 210,000 280,000 440,000 285,000 1,215,000 Required: 1. What are the costs allocated to the two production departments using (a) the direct method, (b) the step method, when the sourcing department that provides the greatest percentage of services to other service departments goes first, and (c) the reciprocal method?…Angle Max Industries produces a product which goes through two operations, Assembly and Finishing, before it is ready to be shipped. Next year's expected costs and activities are shown below. Direct labor hours Machine hours Overhead costs Multiple Choice Assume that the Assembly Department allocates overhead using a plantwide overhead rate based on machine hours. How much total overhead will be assigned to a product that requires 2 direct labor hour and 3.30 machine hours in the Assembly Department, and 4.50 direct labor hours and 0.4 machine hours in the Finishing Department? O$17.60. Assembly 180,000 DLH 380,000 MH $380,000 $20.40. Finishing 148,000 DLH 91, 200 MH $562, 400
- Luther Manufacturing uses an activity-based cost system. The company produces Model 0 and Model J. Information relating to the two products is as follows: Model O Model J 48,000 60,000 Units produced Machine hours 15,000 17,000 Direct labor hours 16,000 24,000 Material handling (number of moves) 8,000 12,000 Setups 10,000 14,000 Th+following costs are reported: Material handling $160,000 Labor-related overhead 480,000 Setups 240,000 Labor-related overhead costs assigned to Model O are (E) a. $240,000 C. $217,000 b. $232,000 d. $192,000Solomons, Inc. has refined its allocation system by separating manufacturing overhead into two cost pools, one for each department. The estimated cost for the mixing department, $615,000, will be allocated based on direct labor hours, and the estimated direct labor hours for the year are 201,000. The estimated cost for the packaging department, $293,000, will be allocated based on direct labor hours, and the estimated machine hours for the year are 59,200. In October, the company incurred 17,240 direct labor hours in the mixing department and a total of 14,260 machine hours in the packaging department.(Round your answers to two decimal places when needed and use rounded answers for all future calculations).1. Compute the predetermined overhead allocation rates. Department Total estimated overhead cost ? Total estimated quantity of the overhead allocation base = Predetermined Overhead Allocation Rate (Per Machine Hour) Mixing Department = Packaging Department =…Greenwood Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity- based costing (ABC) system that allocates all of its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products Y and Z: Activity Cost Pool Machining Machine setups Production design General factory Activity Measure Machining Windows DESKTOP- Windows Number of setups Number of products Direct labor-hours Total overhead cost Activity Measure Machine-hours Number of setups Number of products Direct labor-hours Product Y FEB +1 (252) 484-2153 Oh nun Product Y Product Z 8,800 3,200 240 40 1 1 8,800 3,200 11. Using the plantwide overhead rate, what percentage of the total overhead cost is allocated to Product Y an Product Z? (F your intermediate calculations to 2 decimal places. Round your answers to 2…
- Heintz Products uses activity-based costing to account for product costs. The plant manager has estimated the following cost drivers and rates. Activity Centers Materials inspection Equipment maintenance Machine setups Packing and shipping Cost Drivers Direct materials cost Machine-hours Number of production runs Pounds of finished output Rate per Cost Driver Unit 15% of materials cost $ 19 per machine-hour $ 6,370 per setup $ 4.20 per pound Direct materials costs were $508,000 and direct labor costs were $348,000 during November, when the plant finished 7,000 pounds of product, had 20 setups, and ran the machines for 15,000 hours. There were no work-in-process inventories. Required: Use T-accounts to show the flow of materials, labor, and overhead costs from the four overhead activity centers through Work- in-Process Inventory and out to Finished Goods Inventory. Use the accounts Materials Inventory, Wages Payable, Work-in- Process Inventory, Finished Goods Inventory, and four…Maxey & Sons manufactures two types of storage cabinets—Type A and Type B—and applies manufacturing overhead to all units at the rate of $120 per machine hour. Production information follows. Type A Type BAnticipated volume (units) 24,000 45,000 Direct-material cost per unit $ 28 $ 42 Direct-labor cost per unit 33 33 The controller, who is studying the use of activity-based costing, has determined that the firm’s overhead can be identified with three activities: manufacturing setups, machine processing, and product shipping. Data on the number of setups, machine hours, and outgoing shipments, which are the activities’ three respective cost drivers, follow. Type A Type B TotalSetups 140 100 240 Machine hours 48,000 67,500 115,500 Outgoing shipments 200 150 350 The firm’s total…Greenwood Company manufactures two products-13,000 units of Product Y and 5,000 units of Product Z. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity- based costing (ABC) system that allocates all of its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products Y and Z: Activity Cost Pool Machining Machine setups Production design General factory Activity Measure Machining DESKTOP- Windows Number of setups Number of products Direct labor-hours General factory cost Activity Measure Machine-hours Number of setups Number of products Direct labor-hours Product Y +1 (252) 484-2153 Oh nun Product Y Product Z 8,800 3,200 40 240 1 1 8,800 3,200 % 15. Using the ABC system, what percentage of the General Factory cost is assigned to Product Y and Product Z? (Round your intermediate calculations and final answers to 2 decimal places.) Product Z (@ 2 0…
- Hakara Company has been using direct labor costs as the basis for assigning overhead to its many products. Under this allocation system, product A has been assigned overhead of $23.18 per unit, while product B has been assigned $9.84 per unit. Management feels that an ABC system will provide a more accurate allocation of the overhead costs and has collected the following cost pool and cost driver information: Cost Pools Activity Costs. $426,000 Machine setup Materials handling 171,000 54,000 Electric power The following cost information pertains to the production of A and B, just two of Hakara's many products: Number of units produced Direct materials cost Direct labor cost Number of setup hours Pounds of materials used Kilowatt-hours Product A Product B A 5,000 $ 37,000 $ 24,000 100 1,000 2,000 X Answer is not complete. Cost per Unit $ 18.22 X Cost Drivers Setup hours Pounds of materials. Kilowatt-hours Required: 1. Use activity-based costing to determine a unit cost for each product.…Maxey & Sons manufactures two types of storage cabinets-Type A and Type B-and applies manufacturing overhead to all units at the rate of $120 per machine hour. Production information follows. Descriptions Anticipated volume (units) Direct-material cost per unit Direct-labor cost per unit Descriptions The controller, who is studying the use of activity-based costing, has determined that the firm's overhead can be identified with three activities: manufacturing setups, machine processing, and product shipping. Data on the number of setups, machine hours, and outgoing shipments, which are the activities' three respective cost drivers, follow. Setups Machine hours Outgoing shipments Type A 140 48,000 200 Required 1 Required 2 Required 3 Type A 24,000 $ 28 33 The firm's total overhead of $13,860,000 is subdivided as follows: manufacturing setups, $3,024,000; machine processing, $8,316,000; and product shipping, $2,520,000. Required: 1. Compute the unit manufacturing cost of Type A and Type…Greenwood Company manufactures two products—15,000 units of Product Y and 7,000 units of Product Z. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates all of its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products Y and Z: Activity Cost Pool Activity Measure Estimated Overhead Cost Expected Activity Machining Machine-hours $ 227,700 11,000 MHs Machine setups Number of setups $ 153,900 270 setups Production design Number of products $ 91,000 2 products General factory Direct labor-hours $ 257,000 10,000 DLHs Activity Measure Product Y Product Z Machining 8,700 2,300 Number of setups 60 210 Number of products 1 1 Direct labor-hours 8,700 1,300 3. What is the activity rate for the Machining activity cost pool? (Round your answer to 2 decimal places.)