SITUATION I: A 50-m steel tape is of standard length under a pull of 5kg and a temperature of 22 degree celcius when supported throughout its entire length. The tape weighs 0.06 kg/m, has a cross section area of 0.06 cm’and a modulus of elasticity of 2x10°kg/cm?. The tape was used in the field to measure a distance that was determined to be 525.48. At the time the measurement was made, the constant pull applied was 10kg with the tape supported only at endpoints. During measurement, the temperature was observed to be at an average of 19 degree Celsius. Use alpha a= 12.36x10/degree celcius. 1. Determine the correction due to tension.

SITUATION I: A 50-m steel tape is of standard length under a pull of 5kg and a temperature of 22 degree celcius when supported throughout its entire length. The tape weighs 0.06 kg/m, has a cross section area of 0.06 cm’and a modulus of elasticity of 2x10°kg/cm?. The tape was used in the field to measure a distance that was determined to be 525.48. At the time the measurement was made, the constant pull applied was 10kg with the tape supported only at endpoints. During measurement, the temperature was observed to be at an average of 19 degree Celsius. Use alpha a= 12.36x10/degree celcius. 1. Determine the correction due to tension.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A mild steel wire of radius 0.5 mm and length 3 m is stretched by a force of 49 N. Calculate for the longitudinal stress, longitudinal strain, and elongation produced in the body if Young’s modulus for steel is E = 2.1 x 1011 N/m2. Answers: (6.238 x 107 N/m2, 2.970 x 10-4 m/m, 0.891 mm)
A copper alloy wire of 1.9mm diameter and 30m long hangs freely from Tower. What will be its extension due to the self-weight of the wire? The specific weight of the copper and its modulus of elasticity are 89.2 kN/mm3 and 90 x 10N/mm2 respectively.Comment on the solution
An AISI 1020 steel rod 12 feet long is anchored between two rigid supports. At 68 degrees the rod has a stress of 6,000 psi. At what temperature will the rod have no stress? Assume the rod is in tension. Use degrees as the units and round to two decimal places.
A cylindrical rod having a diameter of 0.5in is subjected to tension. How much load is required to cause a 10-4in change in the diameter. Take Young’s modulus of rod as 11x106 psi and Poisson’s ratio as 0.33.
A 30 m tape weighing 0.900 kg has a cross-sectional area 0.048 cm2. The tape measures30.000 m when supported throughout under a tension of 5 kg. The modulus of elasticityis 2.1 × 106 kg/cm2. What tension is required to make the tape measure 30 m whensupported only at the two ends
3. A uniform steel bar of length 1.65 m, has a cross sectional area of 17,671 mm² and unit mass 7850 kg/m³, is suspended vertically from one end. Young's modulus of elasticity is 210 GPa. Find its elongation.
Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and cross-sectional area of 10 mm?. A 40000 N/mm B 2500 N/mm 1000 N/mm D 1 N/mm
The modulus of rigidity of material is 200Gpa. A 10mm diameter rod of the material was subjected to an axial pull of 10KN and change in diameter was to be observed 3mm. Calculate the Poisson's ratio and modulus of elasticity.
A 50-m steel tape weighs 0.04 kg/m and has a cross-sectional area of 0.022 sq. cm. It measures correctly when supported throughout under a tension of 8.0 kg and at a temperature of 20 degrees Celsius. When used in the field, the tape is only supported at its ends, under a pull of 9.0 kg, and at an average temperature of 28 degrees Celsius. What is the distance between the zero and 50-m mark? a.47.98 m b.50.09 m c.49.90 m d.48.89 mShow Solution please
Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and cross-sectional area of 10 mm². A 40000 N/mm B 2500 N/mm 1000 N/mm 1 /mm
A steel bar 2 m long, 40 mm width and 20 mm thickness is subjected to an axial pull of 160 kN in the direction of its length. find the changes in length, width and thickness of the bar. take E-200 GPa and poison's ratio=0.3.
Answer the problem question and store value and then use 2 decimal places as final answer then box the final answer. Don’t forget the unit. Take note: Write it on a paper, hand written showing correct answer.