Situation # 4: The pump shown draws water from the reservoir A at elevation 10m and lifts it to reservoir B at elevation 60m. The loss of head from A to 1 is two times the velocity head in the 200mm diameter pipe and the loss of head from 2 to B is ten times the velocity head in the 150mm diameter pipe. Determine the relate horsepower of the pump and the pressure heads at 1 and 2 in meters when the discharge is 0.03m/sec. El. 60m Ei. 30 m 500 m 200 rm 2l. a m FUMP

Q: Determine the horizontal force required to keep the bend stationary. a.233.56 N → b.134.84 N →…

A:

Q: The 50 cm diameter pipe shown below transfers water from reservoir A to a pressure turbine and…

A: Given Data Determine the power (in HP) from the turbine (P).

Q: (c) Figure Q4(c)(i) shows the system consists of 1200 m of 5 cm cast-iron pipe, two 45° and four 90°…

A: L = 1200 mD = 5 cm or 0.05 m Q = 0.005 m3/s = 0.001 kg/m s

Q: 7.30 FLUS For this refinery pipe, DA = 20 cm. Dg = 14 cm, and L= 1 m. If crude oil (S = 0.90) is…

A:

Q: 4. The water discharge through the 200 mm pipe shown is throttled to a velocity of 2.4 m/s by means…

A: delivery pipe diameter= 200 mmsuction pipe diameter = 300mlength of suction pipe = 30 mvelocity =…

Q: The 600 mm pipe shown conducts water from reservoir A to a pressure turbine, which discharges…

A: Head lost from A to 1 = 5 x velocity head in pipeHead lost from 2 to B = 0.2 x velocity head in…

Q: Fig. 2. Assume constar factors, with f = 0.018. The head-discharge relation for the pump is Hp =…

A:

Q: 3. A pump is discharging 20 lit/sec of water through 100mm diameter smooth steel pipe. When the pump…

A: Given data- Discharge -(Q)=20 lit/s=20×106 mm/s,Area- A=π4×d2=π4×1002=7853.98 mm2,Pressure P=720…

Q: Determine the pressure (kPa) of the water in the pipe at B, if the tank is filled with crude oil to…

A: Pressure- pressure is defined as the force applied perpendicular to the surface of objects. Unit of…

Q: Two reservoirs 1500 m apart have a water surface elevation difference of 18 m. A cast iron pipe with…

A:

Q: storage tank located  30m above the pump.  The suction pipe is 350mm in diameter and 12m in length,…

A:

Q: A pump draws water from reservoir A and lifts it to reservoir B as showm, The head los from…

A: Discharge, Head loss from A to pipe 1, Head loss from pipe 2 to B, To find:            (a)Horse…

Q: 3. Water is being pumped at 2.5ft3/s. The head loss between points 1 and 2 is 9ft and the power…

A: Given data: Flow of water pumped by the pump: Q=2.5 ft3/s Head loss between point 1 and 2 = hL=9 ft.…

Pressurized pipe flow

A 15-kilometer-long pipe with a pipe diameter of one meter transports water at a speed of one meter per second. The pipe has a friction coefficient of 0.005. Calculate the frictional head loss?