Situation 1: A spillway controls a reservoir 4.60 hectares in area. The permanent crest is at elevation 75 m. Water can be drawn from elevation Find the length of spillway. Use 76.50 m to 75.50 m in 42 minutes. Francis formula.

Situation 1: A spillway controls a reservoir 4.60 hectares in area. The permanent crest is at elevation 75 m. Water can be drawn from elevation Find the length of spillway. Use 76.50 m to 75.50 m in 42 minutes. Francis formula.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: 542.A hydraulic jump was established in the river. The depth before the jump measured 3.38 cm and…

A: Given data in question Depths of flow Width of channel Discharge To find out Type of jump

Q: A straight 30 cm pipeline 4.80 km long is laid between two reservoirs having surfaces at Elev 100 m…

A: Consider the following diagram for the given condition: The numbers 1, 2, and 3 are the three…

Q: 3. A hydraulic jump is to be formed in a channel carrying a discharge of 0.8 m³/s/m width of channel…

Q: A straight 30 cm pipeline 4.80 km long is laid between two reservoirs having surfaces at Elev 100 m…

Q: Three reservoirs A, B, and C are connected respectively with pipes 1,2, and 3 joining at a common…

Q: A rectangular channel 12.0 m wide is laid on a slope of 0.0028. The depth of flow at one section is…

A: We know that,2q2g = y1y2(y1 + y2)Given, y1 = 1.5 m & y2 = 1.8 m 2q29.81 = 1.5×1.81.5 + 1.8q =…

Q: at a depth of 360 mm. A hydraulic jump occurs and the depth of water downstream from the

A: Given data- Width(B) = 5m Depth(y1) = 360 mm = 0.36 m Hydraulic jump(y2) = 1300 mm = 1.3 m

Q: Water flows over the spillway of a dam at a depth of 2.73 m over it. The difference of elevation…

A: Given Data Depth over spillway (H) = 2.73m Difference of elevation = 30m Discharge coefficient…

Q: 10. a spillway controls a reservoir 4.6 hectares in area. The permanent crest is at elevation 75m.…

A: 9. width and depth of channel is missing 10. Calculate the area of reservoir…

Q: A rectangular suppressed weir of length 1m is constructed or cut at the top of a tall rectangular…

Q: It is proposed to replace t y a siphon spillway of sect .5 m with operating head arge coefficient…

Q: 8. Two vertical-sided reservoirs each have a surface area of 186 m² and are connected by a submerged…

Q: A concrete spillway which is used to control a reservoir area of 4 hectares has a permanent crest…

A: Given Data:Area (A) = 4 hactaresCrest elevation (H)=40mTime T= 24 min

Q: Spillway 12.9 m. long releases flood run off from a reservoir 5 hectares in area. If the reservoir…

Q: A trapezoidal channel is to be designed for the maximum efficiency to carry a discharge of 10m2/s.…

A: The maximum efficiency of the channel is achieved by calculating the dimension for the hydraulically…

Q: Water flows over a spillway that is 8 ft wide. If the flow is 450 ft^3/s, and the depth at the…

A: above given data we have to find Fe ant point 1 depth after hydraulic jump and energy that is lost

Q: A rectangular channel 2.685 m wide and 1.342 m deep has a slope of 1 in 10000, and is lined with…

Q: 2. A rectangular channel 4 m wide flows at a flow rate of 10 m^3/s at a depth of yt=2.5m.lf the…

Q: SITUATION 2: Three reservoirs A, B, and C are connected by a pipe system with a common junction at…

Q: A rectangular channel is 4 m wide, and it reduces to 2 m through a hydraulic structure. Assuring the…

A: The specific energy at the constriction is given as 6 m. Assuming choking occurs, we can use the…

Q: rectangular channel flows at a rate of 1m3/s, if the specific energy before the jump is 2.5m and the…

Q: A trapezoidal channel has a bottom width of 6 m and a side slope of 1:1. The depth of flow is 2 m at…

A: Depth of flow y=2 m, Discharge Q=24 m3/s, Side slope = 1 : 1, Width B=6 m, It is needed to find…

Q: PROBLEM: A new 450 mm cast-iron pipe 600 m long carries 0.25 m /s, from reservoir A, discharging…

Q: A V-notch weir is located at one end of a tank having a horizontal square section 12m x 12m. The…

A: The formula for discharge over V-notch is; Q=815Cd2gtanθ2H52 Here in this question given data is;…

Q: The discharge over a trapezoidal weir is 1180 L/s. The crest length is 1.5m and the side slope of…

Q: Determine the discharge of the weir having a head of 0.40m. in liters/sec. If a trapezoidal weir…

Q: An overflow spillway has its crest at an elevation of 138 m and a horizontal apron at an elevation…

A: The given data is shown below: Crest elevation=138mhorizontal apron elevation=100mElevation of…

Q: The spillway below discharges to a rectangular channel with 2 m width and 2.4 m³/s discharge. Find…

A: solution attached in next step

Q: Spillway 12.9 m. long releases flood run off from a reservoir 5 hectares in area. If the reservoir…

Q: A rectangular suppressed weir of length Im is constructed or cut at the top of a tall rectangular…

A: Length of weir = 1 m height of head above weir = 1 m Dimension of horizontal section of rectangular…

Q: ds to discharge 144 m³ of water. The coefficient of discharge is 0.60. Which of the following most…

A: Given data Initial head, H=1.80m coefficient of discharge =0.60 Discharge through weir is 144m3 of…

Q: a rectangulsr suppressed weir is placed on the side of a reservoir whose plan area is a constant…

A: step 1-

Q: A suppressed weir is located at the end of a square tank (s = 3.05m) and height h = 10m. If the…

A: Side of tank tank = 3.05 m Head of water = 0.61 m Volume discharge = 3.54 m³ To find - time taken to…

Q: In the vertical wall of a reservoir (A) there is a drowned hole that it flows into another reservoir…

A: For Orifice-2,Coefficient for Contraction (Cc) = 0.64Discharge Coefficient (Cd) = 0.604Actual…

Q: A spillway controls a reservoir 5.8 hectares in area. The permanent elevation of the crest is at…

Concept explainers

Highway Drainage

Highway drainage is the process of extracting and regulating the excess surface water on the pavement by giving the desired slope. The construction of a highway drain helps to divert the water present on the surface, and sub-grade by the means of slope. Highway drainage systems are a necessary part of smooth functioning of traffic, since the highway drainage systems provide proper disposal of unwanted substances from the highways.

Question

Situation 1: A spillway controls a reservoir 4.60 hectares in area. The
permanent crest is at elevation 75 m. Water can be drawn from elevation
76.50 m to
75.50 m in 42 minutes. Find the length of spillway. Use
Francis formula.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

SITUATION 29
complete solution
I need solution with proper steps I'm new to this
Quick soln.please expert.
A spillway 45 m long having discharge coefficient 1.8 permits a maximum discharge of 90 m³/s from a storage reservoir. It is proposed to replace the spillway by a siphon spillway of section 0.75 mx 1.5 m with operating head 8 m and discharge coefficient 0.64. Find the number of siphons required and the amount of extra water sored, if the siphons have a priming depth of 0.15 m; the average surface area of the reservoir being 5 x 105 m².
9. A symmetrical trapezoidal weir with side slope of 1H to 3V Has water following through it. If the head is 0.65m and the crest length is 6.25m find the nearest discharge if C= 0.62 10. a spillway controls a reservoir 4.6 hectares in area. The permanent crest is at elevation 75m. If water can be drawn from elevation 76.5m to elevation 75.5m in 42 minutes. Find the length of the spillway. Use Francis formula neglecting velocity of approach.
For the following spillway of Hd = 10 m , P = 25 m , L = 120 m g = 9.81 m/s2 , calculate the design flowrate Q = 5500- 7400 m3/s Q = 8000- 8400 m3/s Q = 3100- 3400 m3/s Q = 6000- 6400 m3/s
(b) A dam spillway is to be designed as a combination of a circle-quadrant and rectangular cross- section, as shown in Fig. Q3b. The design constraints are as follows: • The base width (w) must not exceed three times the height (h) of water. • The total wetted perimeter must not exceed 15 m. The spillway must contain an average velocity of 1.5 m/s. Determine the dimensions (w and h) that satisfy the constraints, and then calculate the flow of water in the spillway. Fig. Q3b.
The discharge over a trapezoidal weir is 1180 L/s. The crest length is 1.5m and the side slope of the trapezoid is 4 vertical and 1 horizontal. Determine the head on the weir in meters.
A suppressed weir 7.5m long is to discharge 10.125 m3/s of water from an open channel. The weir factor is 1.88. Determine the height "P" of the weir if the total depth of the water in the upstream is 1.8m.
A hydraulic jump occurs in a trapezoidal channel with side slope of 1V:2H and base width of 3.8m if the upstream depth is 1.1m and the downstream depth is 2.2m A) compute for the discharge (m^3/s). b) compute for the power (HP) lost in the jump. please put 3 decimal places thank you
A trapezoidal channel of 2.0m bed width and 3:2 side slope carries a discharge of 10m3/sec with a depth of flow of 0.5m. Determine whether the flow is supercritical or subcritical. If hydraulic jump where to form. what would be its height and efficiency. Assume mannings coefficient n = 0.025