Single-stage, single-acting reciprocating compressor takes in air at 1.013 bar and 15°C and delivers it at 7 bar. The compressor is handling a free air delivery amounts 0.3 m'/min. The polytropic index is 1.25 . The compressor rotates at 1000 rev/min with a mechanical efficiency of 87%. If the stroke/bore ratio is 1.2/1, and neglecting the clearance volume, then calculate: • Power of driving motor. • Cylinder bore size. • Isothermal efficiency. Draw the cycle on p-V indicator diagram.

Single-stage, single-acting reciprocating compressor takes in air at 1.013 bar and 15°C and delivers it at 7 bar. The compressor is handling a free air delivery amounts 0.3 m'/min. The polytropic index is 1.25 . The compressor rotates at 1000 rev/min with a mechanical efficiency of 87%. If the stroke/bore ratio is 1.2/1, and neglecting the clearance volume, then calculate: • Power of driving motor. • Cylinder bore size. • Isothermal efficiency. Draw the cycle on p-V indicator diagram.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A single cylinder petrol engine works on the Otto cycle and draws in air at 1.01 bar and 22°C. The bore and stroke of the engine are 105 mm and 130mm respectively and the clearance volume is 13% of the swept volume. If the maximum temperature in the cycle is 1400°C find; a. The Volume at the remaining points of the Cycle b. The Heat Supplied, Heat Rejected, & Efficiency of the Cycle c. The mean effective pressure
Must solve all the questions
Consider a reciprocating air compressor with two-stage, 6.8 m³/min free air delivery at atmospheric conditions of 125 kPa and 18 °C, respectively. The polytropic compression index is 1.28, while the delivery pressure is 1,706 kPa. The mechanical and motor-drive efficiencies are 85% and 93%, respectively. Accept complete inter-cooling and neglect clearance volumes. What is the intermediate pressure in kPa to 1 decimal place? Ciel Saue and Suhmit to and ub mit Cial Saua A 77 A
A gas with flow rate of 100 MMSCFD of needs to be compressed from 800 to 8,000 psia. The inlet temperature is 90°F. How many stages are needed to compress the gas? Assume a 3% pressure loss between stages. Calculate the required HP. What type of compressor would you recommend? Assume n, = 0.9, and Em = 0.9. Yg = 0.62, k = 1.32.
A simple jet carburetor is required to supply 5 kg of air and 0.5 kg of fuel per minute. The fuel specific gravity if 0.75. The air is initially at 1 bar and 300 K. Calculate the throat diameter of the choke for a flow velocity of 100 m/s. Velocity coefficient is 0.8. If the pressure drop across the fuel metering orifice is 0.80 of that of the choke. Calculate orifice diameter assuming Cdf=0.60 and γ = 1.4
Give: Otto cycle Compression ratio = 9 Intake air is at 100kpa and 20°C Maximum cylinder volume = 500 cm^3 Temperature at the end of the adiabatic compression = 800 K CP = 1.01kJ/kgk, Cv = 0.718 kJ/kg, k = 1.4, R = 287.1 J/kgk m= 0.000595 T3 = 1926
Q3: A single stage, double acting air compressor running at 1000 rev./min delivers air at 25 bar and 170°C For this purpose, the induction air conditions can be taken as 1.013 bar and 15°C, and the air deliver at rate 0.25 m³/min. The clearance volume is 3% of the swept volume and the stroke bore ratio is 1.2/1. Calculate the bore and stroke, the volumetric efficiency, the indicated power, and the isothermal efficiency.
1) A singe acting, twin cylinder, ammonia compressor with bore equal to stroke is driven by an engine at 250 rpm. The machine is installed in a chilling plant to generate 700 kW of refrigeration at -18C evaporating temperature. At this temperature, the cooling effect per kg mass is 1160 kJ. The sp volume of vapor entering the compressor is 0.592 m³/kg. Assume 85% volumetric efficiency. Calculate the bore in mm.
Albert bought a portable device to pump his truck tyres. On the manual, he found out that the device is a single stage, single-acting air compressor. Air delivery for this device is 30 bar at a speed of 1500 rev/min. The atmospheric condition of his location is 87 kPa and 20 ˚C, with a FAD of 0.22 m2 /min. The clearance volume is 4% of the swept volume and the stoke/bore ratio is 1.3/1.Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K Based on pictures below 1 which formula number will be used to evaluate the mass flow rate of air? 2 which formula number will be used to evaluate the delivery volume?
9.2 The inlet stagnation temperature of a centrifugal compressor rotating at 10,000 rpm is 20°C. The inlet flow is axial and the blades are radially tipped at the exit. It is required to produce a stagnation pressure ratio of 2.8 when the total to total effi- ciency is 0.85. It has 19 blades and a mass flow rate of 3.0 kg/s. Through measure- ments, the density of air at the exit of the impeller is found to be 1.5 kg/m³. The width of the blades at the exit is 1 cm. Calculate the following: (a) power required to drive the compressor, (b) diameter of the impeller, and (c) absolute Mach num- ber at the exit. Use Stanitz's equation for the slip coefficient. Ans: 355 kW; 0.694 m; 0.897
A steam line carries 200t/h of steam at 40bar connected to a control volume of a spray type desuperheater which is supplied with another line of water at 50 C. Calculate the amount of water that must be sprayed per second to maintain steam at 400 C (at outlet line) when the boiler load causes the first line of steam to leave at 450 C.
A single stage single acting reciprocating air compressor has 0.25 m x 1.75 m runs in 750 rpm is to deliver 0.20m³ free air per second from 101.3 kPa to 355 kPa. Calculate (a) the volume displacement (b) the volumetric efficiency (c) the isothermal work done, compression is at pV =c (d) the isothermal compressor efficiency if the the indicated power of compressor is 40kW