Separate streams of steam and air flow through the turbine and heat exchanger arrangement shown in the figure below, where ins = 1500 kg/min and W;1 = 8,000 kW,. Steady-state operating data are provided on the figure. Heat transfer with the surroundings can be neglected, as can all kinetic and potential energy effects. Wn W2 = ? Turbine Turbine 2 P3 = 10 bar T3 =? T2 = 400°C P2= 10 bar T = 240°C P4 = 1 bar Steam in T = 600°C P1 = 20 bar T5 = 1500 K -5 Ps = 1.35 bar 9. Heat exchanger V T6 = 1200 K P6 = 1 bar Air in Determine: (a) T3, in K. (b) the power output of the second turbine, in kW.

Separate streams of steam and air flow through the turbine and heat exchanger arrangement shown in the figure below, where ins = 1500 kg/min and W;1 = 8,000 kW,. Steady-state operating data are provided on the figure. Heat transfer with the surroundings can be neglected, as can all kinetic and potential energy effects. Wn W2 = ? Turbine Turbine 2 P3 = 10 bar T3 =? T2 = 400°C P2= 10 bar T = 240°C P4 = 1 bar Steam in T = 600°C P1 = 20 bar T5 = 1500 K -5 Ps = 1.35 bar 9. Heat exchanger V T6 = 1200 K P6 = 1 bar Air in Determine: (a) T3, in K. (b) the power output of the second turbine, in kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

4.30 Refrigerant 134a enters a heat exchanger operating ai steady state as a superheated vapour at 10 bars. 60°C. where it is cooled and condensed to saturated liquid at 10 bars. The mass flow rate of the refrigerant is 10 kg/min. A separate stream of air enters the heat exchanger at 37°C with a mass flow rate of 80 kg/min. Ignoring heat transfer from the outside of the heat exchanger and neglecting kinetic and potential energy effects, determine the exit air temperature, in °C.
Mechanical Engineering A steam turbine receives hot & pressurized steam from the inlet (port 1 in the figure), produces work, and discharges steam at low pressure and temperature to the outlet (port 2). P1 = 1.5 x (modifier) MPa, T1 = 350 x (modifier) °C. P2 and T2 are given in the figure. The turbine is at a steady state. Kinetic energy and gravitational potential energy of the steam are negligible compared to its thermal energy. q is negligible Turbine w? P1= T = im =16 kg/s 2+ P, = 0.2 Mpa | T, = 150°C (a) Mass flow rate at the inlet is 10 kg/s. Compute the mass flow rate at the outlet. Show your reasoning (b) Determine the change of specific enthalpy of the steam between the inlet and the outlet. You can assume the specific heat of steam remains essentially constant during the process, with C, = 1.9 kJ/kg.K (c) Compute the work produced by the steam turbine, per unit mass of steam. (d) Compute the power production from the turbine. Power is the work produced per time, and its most…
-Gas supply line- Gas A 1.5 m3 tank initially contains a gas at 140 kPa, 340 K. The tank is connected a line carrying same gas at 1400 kPa and 340 K. What should be heat transfer during this process, in kJ, so that the final pressure and temperature are 1400 kPa and 340 K, respectively. (cp=0.72 kJ/kg.K, cv=0.48 kJ/kg.K).
4.1 A gas turbine power plant is operating as follows. Compressor intake air temperature T, is 306 K, pressure p, is 100 kPa, and compressor pressure ratio B is 15. TIT T, is 1490 K. Isentropic efficiency of compressor N, is 0.88, and that of turbine n is 0.91. Air mass flow rate mi, is 636 kg/s. Fuel mass may be ignored. Calculate (i) actual temperatures at compressor and turbine exits, (ii) plant actual net specific work per kg air, (iii) plant actual power output, (iv) plant actual rates of heat addition and rejection, and (v) plant actual thermal efficiency.
3.14 A heat-driven refrigeration plant operates steadily as a closed system. There is no mechanical power input or output. The refrigeration load extracted from T, = 280 K is O1. The plant receives the heat input QH from the high temperature TH = 1000 K. The plant rejects Qo to the ambient at To = 300 K. The efficiency of this power plant is defined as n = OL/ÕH• Complete the inequality n < ?.
QH = 7 kW, Q, = 3 kW, W = 5 kW b. Q„ = 7 kW, Q, : c. Q„ = 7 kW, Q, а. = 7 kW, W = 0 kW с. = 4 kW, W = 3 kW d. Q = 7 kW, Q, = 0 kW, W = 7 kW For each of the cases in Problem 5.21, determine if a heat pump satisfies the first law (energy equation) and if it violates the second law.
2. A turbine operates under steady flow conditions receiving steam at the following state: pressure 1200 kilo pascal, temperature 188 degrees celsius, Enthalpy 2785 kilojoule per kilogram, speed 33.3 meter per second and elevation 3 m the steam leaves the turbine at the following state; pressure 20 kilo pascal, enthalpy 2512 kilojoule per kilogram, speed 100 m per second and elevation 0 m. Heat is lost to the surroundings at the rate of 0.29 kilojoule per second. if the rate of steam flow through the turbine is 0.42 kg per second. What is the work in kJ/kg and what is the power output of the turbine in kw?
Assume 1.62 lb/sec of fluid enter a steady-state, steady-flow system with P1 = 95.18 psia, ρ1 = 0.341 lb/ft3, v1 = 93.75 fps, u1 = 798.07 BTU/lb, and leave with P2 = 16.73 psia, ρ2 = 0.134 lb/ft3, v2 = 427.15 fps, and u2 = 761.09 BTU/lb. During the passage through the open system, each pound rejects 11 BTU of heat. Determine the work in hp.
A heat exchanger uses medium pressure steam at 10 bar and 350 C to heat cyclohexane vapor from 100 C up to 275 C as shown in the figure below. The steam is available at a flowrate of 32 kg/h and it condenses completely in the heat exchanger and exits as saturated liquid condensate at 10 bar. a) How much heat (in kW) can be provided by the steam? b) How much cyclohexane can be processed in kg/h? Vapor Cyclohexane T = 100 C P = 1 atm Steam T = 350 C = 10 bar Condensate P Vapor Cyclohexane T = 275 C P = 1 atm P = 10 bar
Net work input q in cop
Thermodynamics: Assume temperature t1, pressure p1 and p2 (i.e chose your own values).
The last 3 parts B,D,E