Refrigerant 134a is the working fluid in an ideal vapor-compression refrigeration cycle that communicatesthermally with a cold region at -5 °C and a warm region at 35 °C. The vapor enters the compressor at -10P=9 barL- 30 °CPari T, 35 °C°C,1 bar. The liquid leaves the condenser at 9 bar, 30 °C. The compressor has an isentropic efficiency of80%. The mass flow rate of the refrigerant is 0.08 kg/s. Determine (a) the compressor power, in kW, (b) therefrigeration capacity, in tons, (c) the coefficient of performance, (d) the heat transfer rate to thesurrounding space, and (e) rate of entropy production per cycle (including compressor, evaporation,expansion vale, and condenser).P: =9 barCondenserCompressor n =0.8expansion valveEvaporatorwwwT=-10 °CP=1 bar(a) The compressor power iskW(b) The refrigeration capacity istonsOn. T--5 °C(c) The coefficient of performance, B=(d) The heat transfer rate to the surrounding space iskW(e) The rate of entropy production per cycle iskW/K(Please keep 4 digits after the decimal dot in your answer)Do all parts its my request otherwise skip for other expert

As per the guideline, I can solve only first three subparts. For rest part, repost in a separate…

Refrigerant 134a is the working fluid in an ideal vapor-compression refrigeration cycle that communicates thermally with a cold region at -5 °C and a warm region at 35 °C. The vapor enters the compressor at -10 °C.1 bar. The liquid leaves the condenser at 9 bar, 30 °C. The compressor has an isentropic efficiency of 80%. The mass flow rate of the refrigerant is 0.08 kg/s. Determine (a) the compressor power, in kW, (b) the

Refrigerant 134a is the working fluid in an ideal vapor-compression refrigeration cycle that communicates thermally with a cold region at -5 °C and a warm region at 35 °C. The vapor enters the compressor at -10 °C.1 bar. The liquid leaves the condenser at 9 bar, 30 °C. The compressor has an isentropic efficiency of 80%. The mass flow rate of the refrigerant is 0.08 kg/s. Determine (a) the compressor power, in kW, (b) the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure shows a two-stage, vapor-compression refrigeration system with two evaporators and a direct contact heat exchanger. Saturated vapor ammonia from evaporator 1 enters compressor 1 at 12 lbf/in² and exits the compressor at 46 lbf/in². Evaporator 2 operates at 46 lbf/in2, with saturated vapor exiting at state 8. The condenser pressure is 200 lbf/in2, and saturated liquid refrigerant exits the condenser. Each compressor stage has an isentropic efficiency of 80%. The refrigeration capacity of each evaporator is shown on the figure. Step 1 -5 Expansion A valve +6 -7 Evaporator Expansion valve Qout Condenser Compressor 2 Qin,2 = 10 tons 8 Evaporator Compressor Direct contact heat exchanger in,1 = 5 tons W₁₂
Modify the cycle in Problem 10.9 to have an isentropic compressor efficiency of 83% and let the temperature of the liquid leaving the condenser be 100 F. Sketch the T-s diagram for the modified cycle and determine, for the modified cycle, (a) the compressor power, in horsepower. (b) the rate of heat transfer from the working fluid passing through the condenser, in Btu/min. (c) the coefficient of performance. Note: Problem 10-9 is a vapor-compression system of R134a with a mass flow rate of 30.59 lb/min.
The ordinary household refrigerator is a good example of the application of this cycle. Evaporator Freezer compartment Capillary ube Kitchen air 25°C -18°C Condenser coils 3°C Comprosor HW: Q1: Refrigerant-134a is the working fluid in an ideal compression refrigeration cycle. The refrigerant leaves the evaporator -20°C and has a condenser pressure of 0.9 MPa. The mass flow rate is 3 kg/min. Find COP,, COPR. Camat for same Tmas and Tmin, and the tons of refrigeration. Q2: A simple VCRC using R-134a operates with a condensing temperature of 30°c and an evaporating temperature of -20°c .The system produces 50 kw of refrigeration. Determine the : a) Thermodynamic property values at the four main state points of the cycle, b) COP, c) Rate of refrigerant flow. Another measure of the effectiveness of the refrigeration cycle is how much input power to the compressor, in horsepower, is required for each Ton of cooling. The unit conversion is 4.715 hp per Ton of cooling To convert from COP to…
Ideal vapor-compression refrigeration cycle functions at steady state. Working fluid is Refrigerant 134a. Saturated vapor enters compressor at 1.70 bar. Saturated liquid leaves condenser at 7 bar. Refrigerant has mass flow rate = 7.9 kg/min DETERMINE: 1. What is power of compressor in Watt? 2. What is coefficient of performance? 3. What is refrigerating capacity in tons?
An ammonia-water absorption refrigeration cycle is used to keep a space at -5 C when the ambient temperature is 20 C. Pure ammonia enters the condenser at 20 bar and 60 C at a rate of 0.02 kg/s. Ammonia leaves the condenser as a saturated liquid and is expanded to 2 bar. Ammonia leaves the evaporator as a saturated vapor. Heat is supplied to the generator by geothermal liquid water that enters at 100 C at a rate of 0.25 kg/s and leaves at 70 C. Determine (a) the cooling capacity (in TR) and (b) COP of the system. The enthalpies of ammonia at various states of the system are: condenser inlet h2 = 1510 kJ/kg, evaporator inlet h4 = 418 kJ/kg, evaporator exit h1 = 1420 kJ/kg. Take the specific heat of geothermal water to be 4.18 kJ/kg-K
Complete work
Working fluid is Refrigerant 134a. Vapor-compression refrigeration system has refrigerating capacity = 1650 Btu/hour. Refrigerant enters evaporator at -10F and leaves at 15F. Isentropic compressor efficiency = 74%. Refrigerant condenses at 140F and leaves condenser subcooled at 100F. No large pressure drops through evaporator and condenser. DETERMINE: 1. Pressure of evaporator in lbf/in^2 2. Pressure of condenser in lbf/in^2 3. Mass flow rate in lb/s of refrigerant 134a. 4. Power input in horsepower of compressor. 5. Coefficient of performance.
Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is -30°C. Saturated vapor enters the condenser at 36°C, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 10 kg/min. Determine the power developed by the turbine, in kW, (A) 1.25 B 0.45 0.93 1.69
Please help!!!! Refrigerant 22 enters the compressor of an ideal vapor-compression refrigeration system as saturated vapor at -30°C with a volumetric flow rate of 10 m3/min. The refrigerant leaves the condenser at 19°C, 9 bar. Determine: (a) the magnitude of the compressor power, in kW. (b) the refrigerating capacity, in tons. (c) the coefficient of performance. (d) the rate of entropy production for the cycle, in kW/K. Answer for part (a): 52 kW Answer for part (b): 59 tons Answer for part (c): 3.98 Please answer part also d! That's the part I also need. Thank you!