Q2 a3-phase, 410V, 4-poles, 50Hz, star connected SM has Zs=0.7+j5.892/phase. The motor takes a current of 19A at 0.8 leading powerfactor. Find the excitation emf and load angle. If the load angle at no loadis 1.5 mechanical dree with same excitation voltage, find the friction andwindage torque. WJo. 03WSIN₂.30λ Z₁=0.7+j5-8₁ P=2Ia=19A, Pf=0.8 Led, Ep=Eo=?(2)PFWGofPSolutionE =I-V=410vEo = VP- Ia Ratj x5 = 236.713 - 19 <-18.21 x 0.7 +5.8)307.6 18.21 V• 1500Pin- Prut PFW + P devopPin = √3 IV C054 = √3x410 x 1920-8-10-794kwPau= 3 I₂R= 3x19x0.7 - 758.1 WZS=Pdtop= 3x (236.173)²T²Pderop= 3xVxESin S1323L=3× 1·5X P=3 at no Lood Vo=E0=236.173урт41013√√ R²+ Xs² = √√√√0.7²4+ 5.8² = 5.845-84PFw= 10.794KW - 758,1-1506, 433PFw=8529-467سؤال مهم جداً= 236.1738529-467 x 60Load Ange= -1 8-21B00X2Xx Sin C3) 150 6443354.3 N-mHYS05022ENUOKTEXTICC(GE

Answered: Image /qna-images/answer/4625a762-61ef-439b-bbdd-a25bc28a1f15.jpg

Q2/a3-phase, 410V, 4-poles, 50Hz, star connected SM has Zs= 0.7+j5.892/phase. The motor takes a current of 19A at 0.8 leading power factor. Find the excitation emf and load angle. If the load angle at no load is 1.5 mechanical dree with same excitation voltage, find the friction and windage torque.

Q2/a3-phase, 410V, 4-poles, 50Hz, star connected SM has Zs= 0.7+j5.892/phase. The motor takes a current of 19A at 0.8 leading power factor. Find the excitation emf and load angle. If the load angle at no load is 1.5 mechanical dree with same excitation voltage, find the friction and windage torque.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Plot the relation between( T & I dc) for de motor (prime mover), which is used to obtain the value of torque (T) at each value of (I dc).
A 3-phase induction motor has a star-connected rotor. The rotor e.m.f. at standstill is 50V. The rotor resistance and standstill reactance are 0.5 2 and 3 Q respectively. Find the rotor current per phase and rotor power factor at starting.
A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500-V(r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the winding is 0.2 Q and its inductance is 0.04 H. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume flux remain constant.
Vi Q1) A 220 V, Four pole, 50 Hz Single phase induction motor hasy an actual impedances of Z1 = 1.86 +j 2.56, and Z2 = 3.56 +1 2.567 and total rotational losses (Pfe+ Pfw) of 62 W Find the motor Efficiency at Slip of (5%) Note Zf = 12.4 +j 17.15, Zb= 0.84 +j 1.26 Draw the equivalent circuit with the parameters? Solution: Rr ملاحظة: 72 تهمل لان الدائرة المكافئة لا تحتوي على Z2. 71=1.86 + 32.56.52 17 f = 12.4 +3 17.15 2 : Zb=0.84 + J 1.26 Zt 15.1 + j 20. 97 25.84 154.24.52 I in Put= 220 25-84 = 8.51 A 12= 733.31 1094.09 *100 = in Put Power = 220 * 8.51 * cos 54.24 1094.09 W iPd = 8.51² (12.4 -0.84) (1-0.05) = 795.31 w W out Put Power = 795.32-62 733.31 W 67.02% X1 = roo ea Xm xm R₂ R₂
A 3-phase slip ring motor gives a reading of 35 V across slip rings on open circuit when at standstill with normal stator voltage applied. The rotor is star-connected and has impedance of (0.7+j5) 2 per phase. Find the rotor current and p.f. when the machine is (i) at standstill with slip rings joined to a star connected starter with a phase impedance of (4+j3) 2 and (ii) when running normally with a 5% slip.
short shunt compound generator delivers a load current of 10A at 200V and has a shunt field resistance 200 ohms. The shunt field current of 2A. Then armature delivers a current of a.10A b.8A c.11A d.12A
Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]
In a 3-phase, 4-pole induction motor, The power crossing the air gap of a 60 Hz is 42.6 kW, and the power converted from electrical to mechanical form in the motor is 39.6 kW. If the total mechanical losses are 1000 W, find the load torque of this motor? Select one: O a. None O b. Tload = 208.4 N.m. O c. Tjoad = 232.6 N.m. O d. Tjoad = 220.3 N.m. Clear my choice
Indui circuit resistance of 18 kW, 240V direct current series generator 0.12 Ohm, excitation winding resistance 0.08 is Ohm. Find the value of the moment induced in the inductor in this generator operating at 700 rpm at half load.
Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt 1-Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * 2-The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * 3-Output of the prime motor…….kwatt * 4-Mechanical , electrical and overall efficiency …….. * 5-Flux per pole is......... wb *
Please see attached picture