Q2/ An insulated steam pipe having an outsideSteam pipediameter of 30 mm is to be covered with twoBetter ination (4)Paer ination ()layers of insulation, each haying thickness of20 mm. The thermal conductivity of onematerial is 5 times that of the other.SmL 1.Assuming that the inner and outer surfacetemperatures of composite insulation are fixed,how much will heat transfer be increased whenbetter insulation material is next to the pipethan it is the outer layer?

Given Thermal conductivity(k1)=5k2 T1 and T2 are fixed Thickness = 20mm=0.02m Outside…

Q2/ An insulated steam pipe having an outside Steam pipe diameter of 30 mm is to be covered with two Beter ination (4) Paer ination () ,-54) layers of insulation, each haying thickness of 20 mm. The thermal conductivity of one material is 5 times that of the other. Som Assuming that the inner and outer surface temperatures of composite insulation are fixed, how much will heat transfer be increased when better insulation material is next to the pipe than it is the outer layer?

Q2/ An insulated steam pipe having an outside Steam pipe diameter of 30 mm is to be covered with two Beter ination (4) Paer ination () ,-54) layers of insulation, each haying thickness of 20 mm. The thermal conductivity of one material is 5 times that of the other. Som Assuming that the inner and outer surface temperatures of composite insulation are fixed, how much will heat transfer be increased when better insulation material is next to the pipe than it is the outer layer?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Not sure what I did wrong
Estimate the unit thermal resistance for a vertical 1.5 in. (40 mm) air space. The air space is near the inside surface of a wall of a heated space that has a large thermal resistance near the outside surface. The outdoor temperature is 10 F (-12 C). Assume nonreflective surfaces.
Design thickness of the wall to maintain steady heat flux ??
The left side of a composite wall is kept at 300oC constantly. The right side of the same wall is exposed to air at 20oC with a convection coefficient of 32 W/mk. kA = 10 W/mK, kB = 40 W/mK, kC = 1 W/mK, kD = 300 W/mK, kE = 0.1 W/mK Given figure 1, calculate: a) The total thermal resistance of the wall.b) The total heat rate through the wall.c) The junction temperature where B meets D (between second and third column)
Please answer the question and provide explanation why they are correct or incorrect.
Thermal Conductivity of Skin" Design experiments and calculate heat transfer coefficients/thermal conductivity (k)
To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe (k, = 45 W/m-K) has an inside diameter of D₁, 1 = 150 mm and wall thickness t; = 20 mm while the outer steel pipe has an inside diameter of D₁,2 = 250 mm and wall thickness to = 1;. Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation (k = 0.055 W/m-K) between the two pipes does not exceed its maximum service temperature of 7p,max = 70°C. The ocean water is at T, = -5°C and provides an external convection heat transfer coefficient of h, = 500 W/m²K. The convection coefficient associated with the flowing crude oil is h; = 450 W/m².K. (2) It is proposed to enhance the performance of the…
Show the thermal circuit by labeling all the thermal resistances. Calculate and tabulate the thermal resistances (assume Tavg=470 K for the air gaps). If q''rad= 0.25W/cm^2, what is the outer surface temperature of turnout coat for inner temperature of 66C.
1) A wall section composed from the outside to inside, of concrete brick 100mm thick, an air space of 50mm, two layers of fiberglass insulation 38mm thick, concrete block 150mm thick and air space of 19mm and a gypsum board of 13mm. The exterior conditions are -20C and RH=90% while the interior conditions are 23C and RH=40%. The surface temperature from the outside to inside are shown in the figure. The permeances are: Still Air: µ = 175 ng/pa.s.m Fiber glass: M=2560 ng/pa.s.m? Concrete block: M= 200 ng/pa.s.m? Gypsum board: M= 2000 ng/pa.s.m? Concrete brick: µ = 4.55 ng/pa.s.m Determine if there is a risk of condensation, and if there is, what is the condensation rate? What would happen if a vapor barrier (M=0.2 ng/pa.s.m²) was installed on the warm side of the insulation (Surface 4). 21с 19C 16 С 12C -10 -15C -18C -19C Gyp Air Concrete Fiber Fiber Air Concrete Outdoor Indoor sum block Glass Glass brick 230 19 50 mm -20C 13 150 mm 38 mm | 38 mm 100 mm RH=90% RH=40% mm mm Surf. 1 Surf.…
***answer is correct
What is the thermal resistance of a 3 in fired clay brick with density of 120 Ibm/ft3 a. 0.422 b. 6.8 c. 0.48 d. 6.2
Can you help me provide 2 more assumption of the study A Comparative Analysis of Thermal Performance on Insulation Systems Among Melted Beer Bottles, Plywood, and PE Foam Insulation Assumption of the Study The researchers based this study on the following assumptions: Melted Beer bottle glass is more efficient and durable than PE Foam Insulation. 2. 3.