Q1.1// The figure below shows the plan of a rectangular raft foundation which supports a total load of 40500 kN. The foundation is located at 3 m from the surface. Evaluate the increase in the effective stress at a point 8 m below the surface and having x, y coordinates as (-9, -6.5) with respect to the central axis of the footing. Y 15 m 9 m

Q1.1// The figure below shows the plan of a rectangular raft foundation which supports a total load of 40500 kN. The foundation is located at 3 m from the surface. Evaluate the increase in the effective stress at a point 8 m below the surface and having x, y coordinates as (-9, -6.5) with respect to the central axis of the footing. Y 15 m 9 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

In the figure, the rectangular foundation is loaded with a uniform load of 225 kPa. Accordingly, calculate the vertical stress increase 10 m below point A.
ELABORATE Try solving the following problem: Practice Problem: A rigid foundation is subjected to a vertical column load, P = 550 kN, as shown in Figure 4.9. Estimate the elastic settlement due to the net applied pressure, Ao, at the center of the foundation. Given: B = 2 m; L = 3 m; Df = 1.5 m; H = 5 m; Es = 13,500 kN/m²; and μs = 0.5. SAP Foundation BXL D Soil H, Poisson's ratio. E₂ -modulus of elasticity H Rock Figure 4.9 Ag Cengage Leaming 2014
A strip footing foundation 1 m wide is constructed in the slope of a hill whose surface inclination is 20°. The soil in the hill is a dense sand, with a unit weight of 19 kN/m3 and an angle of internal friction of 40°. Assume that the D/B ratio is about 1. Applying a factor of safety of 3, determine the wall loading the foundation can carry, per meter of footing length.
A foundation carries uniform loads as shown. Determine the value of w (in kN/m). 円円 w(ki/m)
Prob. 3) Referring to the figure below: A) Compute the average increase in stress Ao below the centre of the footing for the clay layer 2. B) Compute the elastic settlement of the clay assuming a shallow foundation. OCR=3, P.I-30%, C-120 kPa, us=0.5. P= 1350 kN G.S. ydry= 17.7 kN/m³ 3 m Clay1 3.mx6 m. 2 m W.T. 2 m ysat= 20 kN/m3 4 m Clay2 ysat= 21 kN/m3 Rigid rock CS Scanned with CamScanner
4. A flexible foundation is shown below, determine the immediate settlement below the center of the foundation. Assume the thickness of the soil below the foundation is 20 meters. Following is the variation of the modulus of the soil below the foundation. Es (kN/m²) Depth below the foundation(m) 0-4 4-8 8-20 >20 1.2m 10000 8000 12000 8 90 = 150kPa BXL = 2m x 2m Ug = 0.3
A and B are two footings of size 1.5 x 1.5 m each placed in position as shown in the following figure. Each of the footings carries a column load of 400 kN. Determine the excess load that footing B carries due to the effect of the load on A. Assume the loads at the centers of footings act as point loads. E 2.5 m |A B 10.5 m Q = 400 kN + 1.5 m - 2.3 m - 1.5 m
A 3.19m x 5.35m footing has a 407 mm column at center with the loads P = 875 kN and My=120.4 kN-m Calculate the pressure at point 2 of the footing in kPa ANSWER IS 64.5392
A rectangular footing 2.0 m x 2.5 m carries three columns at distances from the footing center as shown below. The column loads are: P₁ = 400 kN and P₂ = P3= 200 kN. For the soil profile and properties given, check the safety factor against bearing capacity failure. (Use yw = 10 kN/m³) 0.4 m 0.2 m 2 N Depth be w surface in meters 4 C. 3 (a TENT 7 8 Note: pictures are not drawn to sale 00 0.8 m B 0.8 m 3 Water table ROCK Soil surface WIT Sand c = 0 kPa, = 30° = 16 kN/m³ Y Ysat = 20 kN/m³ Es = 12 MPa, v = 0.3 Clay c = 60 kPa, = 0° Y = 14 kN/m³ Ysat = 19 kN/m³ Cc = 0.3, Cs = 0.1 eo = 1.0 P= 245 kPa