Q: The working fluid, in a steady flow process flows at a rate of 220 kg/min. thefluid rejects 100 kj/s passing through the system. The conditions of the fluid at inletand outlet are given as: cl= 320 m/s, pl=6.0 bar, ul= 2000 kg/kg, v1= 0.36m3/kgand c2= 140 m/s, p2= 1.2 bar, u2= 1400 kj/kg, v2= 1.3 m3/kg. Determine the powercapacity of the system in MW. The change in potential energy may be neglected.

Given Flow rate=220kg/min C1=320m/s P1=6.0bar C2=140m/s P2=1.2bar

Q: The working fluid, in a steady flow process flows at a rate of 220 kg/min. the fluid rejects 100 kj/s passing through the system. The conditions of the fluid at inlet and outlet are given as: c1= 320 m/s, pl=6.0 bar, ul= 2000 kg/kg, v1= 0.36m3/kg and c2= 140 m/s, p2= 1.2 bar, u2= 1400 kj/kg, v2= 1.3 m3/kg. Determine the power capacity of the system in MW. The change in potential energy may be neglected.

Q: The working fluid, in a steady flow process flows at a rate of 220 kg/min. the fluid rejects 100 kj/s passing through the system. The conditions of the fluid at inlet and outlet are given as: c1= 320 m/s, pl=6.0 bar, ul= 2000 kg/kg, v1= 0.36m3/kg and c2= 140 m/s, p2= 1.2 bar, u2= 1400 kj/kg, v2= 1.3 m3/kg. Determine the power capacity of the system in MW. The change in potential energy may be neglected.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Crude oil (with specific weight γoil = 55 lb/ft3 ) is pumped at a rate of 400 gallons per minute…

A: Given data, Q = 400 gallons/min = 4007.48×60ft3/s density of soil (γoil) = 55 lb/ft3pressure at A…

Q: ē + 9;2- Tank 2 Tank 3 Tank 1 A, + h A2 + hz Az + h3

A: Solution of first part is formed by forming differential equations for each tankThe laplace…

Q: Q4. The tank is filled with aqueous ammonia (ammonium hydroxide) to a depth of 3 ft. The remaining…

Q: Answer is given, just give the solution

A: The objective of the question is to find the horsepower being given up by the water to the turbine…

Q: Calculate the location of the center of pressure, Lp, to in m to the nearest 1000th. Fluid: Orange…

A: Concept: Center of Pressure The total pressure force acting on a fully submerged body is called the…

Q: Flow rate of a fluid (density = 1000 kg/m³) in a small diameter tube is 800 mm³/s. The length and…

A: Given:Density of the fluidρ=1000 Kg/m3DischargeQ=800 m3/sQ=800×10-9 m3/sLength of the tube(L)=2…

Q: Problem 5 Gasoline having a specific gravity of 0.8 is flowing in the pipe shown at a rate of 5…

A: Given that,Area at section 1 = 0.8 ft^2Area at section 2 = 0.2 ft^2Flow rate Q = 5 ft^3/sHead loss =…

Q: A liquid of specific weight 58 lb/ft3 flows by gravity through a 1-ft tank and a 1-ft capillary tube…

Q: A 3 cm orifice plate is placed within a 4 cm pipe in which methanol at 20 °C (SG = 0.7884 and…

A: Diameter of the orifice = d = 3m Diameter of the pipe = D = 4m Specific gravity of the methanol…

Q: Water flows through a pipe before passing through a nozzle and exiting as a free jet to the…

A: In this question we use a) coefficient of contraction formula Cc = (Area of jet at vena contracta /…

Q: Calculate the pipe diameter required to provide 0.0057 m³/s of a fluid with = 6.09E-6 m²/s at T-15…

Q: A cylindrical container with a massless and frictionless piston is filled with water up to a height…

Q: The 100-mm-diameter commercial steel pipe discharges water at 25°C through the 40-mm-diameter…

A: The 100-mm-diameter commercial steel pipe discharges water at 25°C through the 40-mm-diameter…

Q: Figure shows below a Fluid 1 (SG = 0.88) and fluid 2 (SG = 2.93). If Pa = 98 kPa, determine the…

Concept explainers

Fluid Materials

In general terms, anything that flows can be termed as a fluid. In other words, a fluid is any substance that cannot resist shear forces and deforms continuously under the application of external shear forces. Fluid materials differ completely from solid materials such as metals and alloys. For instance, if we consider two infinitesimally small cross-sectional areas of fluid materials and solid materials, and apply shear forces to these elements, both the elements will undergo deformation. Upon releasing the shear force, the element of the solid materials will regain its original orientation, but the element of the fluid materials will keep on deforming continuously under the action of the shear force.

Question

Q: The working fluid, in a steady flow process flows at a rate of 220 kg/min. the
fluid rejects 100 kj/s passing through the system. The conditions of the fluid at inlet
and outlet are given as: cl= 320 m/s, pl=6.0 bar, ul= 2000 kg/kg, v1= 0.36m3/kg
and c2= 140 m/s, p2= 1.2 bar, u2= 1400 kj/kg, v2= 1.3 m3/kg. Determine the power
capacity of the system in MW. The change in potential energy may be neglected.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Heavy fuel oil flows at Q = 10 gallons per minute (gpm) in a horizontal steel pipe that connects two storage tanks. The diameter of the pipe is D = 1.5 inches. The length of the pipe is L = 100 feet. The depth of oil in the supply tank is 30 feet above the pipe entrance. The temperature of the oil is 60°F, the specific gravity of the oil is s.g.oin = 0.90, the specific weight of the oil is 56.13 lb/ft', and the kinematic viscosity of the oil is 0.00175 ft2/s. The pipe discharges into the bottom of the receiving tank. Neglect minor losses. a) Determine the pressure p at the pipe entrance in pounds per square foot (psf). b) Determine the velocity v in feet per second (fps). c) Determine the Reynolds number Re. d) Classify the flow based on the Reynolds number Re. e) Determine the Darcy-Weisbach friction factor f. f) Determine the friction head loss hfac in feet in the pipe between the two storage tanks. 8) Determine the depth of oil in feet above the exit from the pipe into the second…
What pressure, p₁, is needed to produce a flowrate of 0.09 ft3/s from the tank shown in the figure below? Assume d = 0.071 ft. P1 = Mi ! psi Air P1 Gasoline diameter d→ Salt water SG = 1.1 2.0 ft 3.6 ft
1.) A pressure in a given tank reads 398 mm of Hg. Determine the equivalent height of a certain fluid in m with sp.gr= 4.33.
Given The tank shown has one curved surface restraining a body of static fluid, with the following dimensions: w- 5.00 m h1 = 2.5 m R1 = 0.85 m Required Determine the value of x-bar in metres, to the nearest 1000th. Water hl R1
Air in a room at T0 = 290 K and P0 = 90 kPa is to be drawn by a vacuum pump through a 3-cm-diameter, 2-m-long adiabatic tube equipped with a converging nozzle at the inlet. The flow in the nozzle section can be approximated as isentropic. The static pressure is measured to be 87 kPa at the tube inlet and 55 kPa at the tube exit. Determine the mass flow rate of air through the duct, the air velocity at the duct exit, and the average friction factor for the duct.