Problem 2A reinforced concrete slab is built integrally with its supports (beams) and consists of three equal spans,each with a clear span of 4.0 m. The service live load is 5 kN/m2. The concrete compressive strength fc’ = 28MPa and steel yield strength fy = 420 MPa. Use concrete cover=25 mm, unit weight of concrtete=25 kN/m3.Design the slab following the ACI code provisions.

Problem 2A reinforced concrete slab is built integrally with its supports (beams) and consists of three equal spans,each with a clear span of 4.0 m. The service live load is 5 kN/m2. The concrete compressive strength fc’ = 28MPa and steel yield strength fy = 420 MPa. Use concrete cover=25 mm, unit weight of concrtete=25 kN/m3.Design the slab following the ACI code provisions.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

a-Design the concrete column to carry the applied load Concrete allowable strength: 35 MPa P= 900 kN Column dimension needs to be 300 mm X B Material reduction factor 0.75 - Load factor 1.5 B mm 300
4. An interior reinforced concrete slab has to be designed to support a live load and a dead load in addition to its own weight based on the following specifications: The slab is one-way and simply supported with a span of 12 ft. The live load on the slab is 200 psf. The dead load on the slab is 100 psf. Your design will use concrete compressive strength fe= 3000 psi and steel yield strength of fy = 40,000 psi
A rectangular beam has the dimensions (see Figure) b = 12 in., h - 20 in, and d 17 in. and is reinforced with three No. 9 (No. 29) bars so that As - 3.00 in. The concrete compressive strength fe is 4000 psi, and the tensile strength In bending (modulus of rupture) is 475 psi. The yield point of the steel f, is 60,000 psi. Determine the concrete compression stress at the top fiber caused by a bending moment M- 10 ft-kips. 9- 6.78 in, I= 4067 in, Es= 29000000, E = 3600000 17 in. 20 in. 3 #9 bars (A, - 3.00 in.?) 3 in. -12 in- Select one: a. 390 psi b. 1390 psi c. 200 psi d. 250 psi
Hello, please solve the question about reinforced concrete from the sixth and seventh chapters of the third civil stage
Ultimate Design Single concrete
7.b
i need the answer quickly
A RC column is having 1% steel of cross sectional area of column. Assurme a modulus ratio of 10. The loads carried by longitudinal steel is Ps and that by net concrete area is Pc. Find the ratio Ps/Pc, in terms of percentage.
Correct solution
What is the threshold torsion (kN-m) of a rectangular beam with a width of 446 mm and an over-all depth of 536 mm? The distance of the tension reinforcements from the bottom fiber of the beam is 75 mm. The specified compressive strength of concrete is 22.00 MPa. The yield strength of tension reinforcements and stirrups are 404 MPa and 323 MPa respectively.
A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars Compressive strength of concrete is 28 MPa and yield strength of reinforcing bars is 420MPa. a) Maximum Steel ratiob) Tension Forcec) Compression Force