Piosqu wab lico, 182 los na not 18- A stream of outdoor air at 35°C dbt and 28°C wbt is mixed with return air at 25°C dbt and 50% R.H in an air conditioning system. If the flow rates of the outside and return air are 450 and 1800 kg/hr, estimate the condition of the air stream after mixing.

Q: Thermodynamic review I cannnot solve! Someone answered this question for me but I was hoping there…

A:

Q: (7-2 from textbook) Determine the specific compressor work input required to compress steam…

A:

Q: using EES, plot the enthalpy of vaporization of refrigerant 134a as a dunction of temp over the temp…

A: Given:Using EES, plot the enthalpy of vaporization of refrigerant 134a as a function of temp over…

Q: Air at 35°C, 105 kPa flows in a 100mm x 150mm rectangular duct in a heating system. If the…

A: Given data: T=35°C=308.2 KP=105 kPaV˙=0.015 m3/sA=100×150 mm2 Need to determine the mass flow rate…

Q: In single duct air conditioning system, the 1.5 kg/s of outlet air at -4°C db, 80% RH mixes with 4.5…

A: Given:Outlet air condition, m˙o=1.5 kg/s, -4oC db, 80% RHReturn air condition, m˙R=4.5 kg/s, 20oC…

Q: Air is used at a rate of 45 cfm from a receiver at 105°F and 125 psi. If the atmospheric pressure is…

A:

Q: 2. A spray drier is used to dry skim milk to a final moisture content of 5.00%. The air entering the…

A: The original water content of the milk is 90.5% The final water content is 5 %. Initial temperature…

Chemical and Phase Equilibrium

Phase diagrams or equilibrium phase diagrams are the graphical representations that show the phase transformations of the constituting elements with respect to the pressure, temperature, and compositions. The diagrams show the conditions that limit the different phases, namely solid, liquid, and gas. The diagram can also be utilized to verify the relations between the state variables. Most of the phase diagrams are temperature-pressure phase diagrams, with the variable parameter as the composition. Usually other variables such as solubility and pressure parameters are not indicated in the phase diagram. For a one-component system (unary phase diagram), the phase diagram is generally a function of temperature and pressure as the state variables, or temperature and volume. However, for a binary system (two-phase) having two components, the phase diagram is a function of temperature and composition as the state variables only. Coexisting of the different phases of the constituting elements is indicated in the phase diagram. A ternary phase diagram can be characterized by consisting of three phases in equilibrium.