(a) A 2.25 kg salami is supported by a cord that runs to a spring scale, which is supported by another cord from the ceiling (see Figure (a)). What is the reading on the scale, which is marked in weight units? (b) In Figure (b) the salami is supported by a cord that runs around a pulley and to a scale. The opposite end of the scale is attached by a cord to a wall. What is the reading on the scale? (c) In Figure (c) the wall has been replaced with a second 2.25 kg salami on the left, and the assembly is stationary. What is the reading on the scale now? Spring scale Spring scale (b) Spring scale (a) (c) (a) Number Units (b) Number i Units (c) Number Units

(a) A 2.25 kg salami is supported by a cord that runs to a spring scale, which is supported by another cord from the ceiling (see Figure (a)). What is the reading on the scale, which is marked in weight units? (b) In Figure (b) the salami is supported by a cord that runs around a pulley and to a scale. The opposite end of the scale is attached by a cord to a wall. What is the reading on the scale? (c) In Figure (c) the wall has been replaced with a second 2.25 kg salami on the left, and the assembly is stationary. What is the reading on the scale now? Spring scale Spring scale (b) Spring scale (a) (c) (a) Number Units (b) Number i Units (c) Number Units

Glencoe Physics: Principles and Problems, Student Edition

1st Edition

ISBN:9780078807213

Author:Paul W. Zitzewitz

Publisher:Paul W. Zitzewitz

Chapter5: Displacement And Force In Two Dimensions

Section: Chapter Questions

Problem 6STP

See similar textbooks

Similar questions

Jamal and Dayo are lifting a large chest, weighing 207 lb, by using the two rope handles attached to either side. As they lift and hold it up so that it is motionless, each handle makes a different angle with respect to the vertical side of the chest (Fig. P5.76). If the angle between Jamals handle and the vertical side is 25.0 and the angle between Dayos handle and the vertical side of the chest is 30.0, what are the tensions in each handle? FIGURE P5.76
A black widow spider hangs motionless from a web that extends vertically from the ceiling above. If the spider has a mass of 1.5 g, what is the tension in the web?
A One end of a metal rod of weight Fg and length L presses against a corner between a wall and the floor (Fig. P14.64). A rope is attached to the other end of the rod. Find the magnitude of the tension in the rope if the angle between the rod and the rope is 90.
The board sandwiched between two other boards in Figure P4.91 weighs 95.5 N. If the coefficient of friction between the boards is 0.663, what must be the magnitude of the compression forces (assumed to be horizontal) acting on both sides of the center board to keep it from slipping? Figure P4.91
A 20.0-kg horizontal plank 4.00 m long rests on two supports, one at the left end and a second 1.00 m from the right end. What is the magnitude of the force exerted on the plank by the support near the right end? (a) 32.0 N (b) 45.2 N (c) 112 N (d) 131 N (e) 98.2 N
A makeshift sign hangs by a wire that is extended over an ideal pulley and is wrapped around a large potted plant on the roof as shown in Figure P6.10. When first set up by the shopkeeper on a sunny and dry day, the sign and the pot are in equilibrium. Is it possible that the sign falls to the ground during a rainstorm while still remaining connected to the pot? What would have to be true for that to be possible? FIGURE P6.10 Problems 10 and 11.
In a tug-of-war game on one campus, 15 students pull on a rope at both ends in an effort to displace the central knot to one side or the other. Two students pull with force 196 N each to the light, four students pull with force 98 N each to the left, five students pull with force 62 N each to the left, three students pull with force 150 N each to the right, and one student pulls with force 250 N to the left. Assuming the positive direction to the tight, express the net pull on the knot in terms of the unit vector. How big is the net pull on the knot? In what direction?
A certain orthodontist uses a wire brace to align a patients crooked tooth as in Figure P5.4. The tension in the wire is adjusted to have a magnitude of 18.0 N. Find the magnitude of the net force exerted by the wire on the crooked tooth.
A painter of mass 87.8 kg is 1.45 m from the top of a 6.67-m ladder. The ladder rests against a wall. Friction between the ladder and the wall is negligible. The ladders mass is 5.50 kg. Assume the ladder is set up according to Occupational Safety and Health Administration standards so that it makes a 75.5 angle with the floor. a. What is the minimum coefficient of static friction required for the painters safety? b. Would rubber ladder tips on dry concrete be safe?
An aluminium (=2.7g/cm3) wire is suspended from the ceiling and hangs vertically. How long must the wire be before the stress at its upper end reaches the proportionality limit, which is 8.0107N/m2 ?
A person places a bathroom scale in the center of the floor and stands on the scale with his arms at his sides ( Fig. 3.26a). If he keeps his arms rigid and quickly raises them over his head (Fig. 3.26b), he notices the scale reading increases as he brings his arms upward. Why? Then, with his arms over his head (Fig. 3.26c), he quickly lowers his arms to his side. How does the scale reading change and why? (Try it yourself.)
A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the wall and the other end of the strut is attached to a sign that weighs 200.0 N The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the s find the tension in the cable and the force at the hinge of the strut.