One driver is driving on a 3% upgrade roadway with an initial speed of 80 mph, assuming his perception-reaction time is 2 seconds, do the following: a. If the driver has to slow down to 0 mph to completely stop in front of an intersection. A stop warning sign for the intersection is clearly visible for a distance of 100 ft. How far in advance of the intersection must the sign be posted in order to insure that vehicles can safely stop, using deceleration rate=9 ft/sec²? b. Redo part a with the default deceleration rate. C. Redo part a, assuming deceleration rate is unknown but the friction factor=0.2.

One driver is driving on a 3% upgrade roadway with an initial speed of 80 mph, assuming his perception-reaction time is 2 seconds, do the following: a. If the driver has to slow down to 0 mph to completely stop in front of an intersection. A stop warning sign for the intersection is clearly visible for a distance of 100 ft. How far in advance of the intersection must the sign be posted in order to insure that vehicles can safely stop, using deceleration rate=9 ft/sec²? b. Redo part a with the default deceleration rate. C. Redo part a, assuming deceleration rate is unknown but the friction factor=0.2.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Traffic arrives at an approach of a signalized intersection at a flow rate of 360 veh/h. The…

A: Given: Flow rate of vehicles = 360 veh/h Effective green time = 30 seconds in a 60-second cycle…

Q: If the travel time delay on a signalized intersection approach is 10 sec/veh, the stopped time delay…

Q: A distracted driver is travelling at 65mph on a roadway with an upgrade of 4% before he finally…

A: Given, Initial speed, Vi = 65 mph or 95.33 ft/s Grade, G = 4% or 0.04 Rolling resistance factor, frl…

Q: 3. An intersection approach has two lane groups: left-turn lane group, and through/right-turn lane…

Q: A signalized intersection operates in two phases. The Lost time is 3 seconds per phase. The maximum…

Q: A simple four legs intersection needs a fixed time signal and the traffic flow condition is shown as…

A: For a simple four legs intersectionthe lost time per phase is 4.2 secondsTo determine (a) the…

Q: Green terminates at a signalized intersection with 6 vehicles queued fo The arrival rate for the…

A: Given data Arrival rate 1 veh/sec Departure rate 2 veh/sec Cycle length 100sec Green time 50sec

Q: A signalized intersection operates in two phases. The lost time is 3 seconds per phase. The maximum…

A: 2-phase road i.e. n = 2Lost time per phase = 3 secMaximum ratios of approach flow to saturationflow…

Q: Question- A signalized intersection operates in two phases. The lost time is 3 seconds per phases.…

A: Given data- Two phase signal system⇒n=2Lost timet=3 s/phaseThe maximum ratios of approach flow to…

Q: An intersection has a three-phase signal with the movements allowed in each phase and corresponding…

Q: An approach to the signalized intersection has one lane group and effective green time of 50…

A: The given data is: The cycle length=90 sec The effective green time=50 sec

Q: Two adjacent signalized intersections along a major arterial are 650 ft apart (stop line to stop…

A: Transportation engineering : Transportation engineering is a discipline of civil engineering…

Q: Because of a visible obstruction along a horizontal curve drivers can only see a stop sign until…

Q: On a two-lane signalized intersection approach that has a peak 15-minute arrival rate of 900 vph, a…

Q: A signalized intersection has four phases. The yci are 0.15, 0.19, 0.21, and 0.17 for the four…

Q: a signaliz ing ignal ycle length with 30 seconds of green signal and 30 seconds of red signal…

Q: The optimum cycle length using the Webster's method

A: Given. Signalised intersection operates in two phases. Lost time= 3 sec/ phase Maximum ratios of…

Q: he driver must slow down from 70 miles/hour to 60 miles/hour to through sharp turns on country…

A: Given data: V1=70 miles/hour V2=60 miles/hour Warning sign for turn visible clear for a distance of…

Q: Under what condition is a value of 0.5 assigned to the parameter K in the expression for the lane…

A: Solution: When lane group delay is calculated, the value of "K" is taken as 0.5, for all the values…

Q: If there is no pedestrian traffic, the yellow interval needed by northbound vehicles to clear the…

A: Approach speed- 35 mphTo find- Yellow interval

Q: For a given one-lane approach of a signalized intersection, the base free flow speed is 40 mph, flow…

Q: Q9:- For the following intersection, it has been decided to use a traffic signal device. The…

A: Given;Amber flow = 3 secWithout all red time; starting delay = 2.5 sec .

Q: The yellow time of an intersection movement was designed based on the speed limit of 35 miles/hour.…

A: Given Data: Speed limit for yellow time is Vlim=35 miles/hour. Approaching speed of the driver is…

Q: An signalized intersection located in Baghdad Capital with four phases, if EYi=0.77, lost time for…

A: Webster method: It is the most rationalized method for desigining traffic signal; in this method,…

Q: An intersection approach has an approach speed of 35 mph with an uphill grade of 1%. The width of…

Q: Answer the following: True/False: Adjusting the yellow interval at an intersection may be used to…

A: True/False: Adjusting the yellow interval at an intersection may be used to address dilemma zone at…

Q: A signalized intersection has two lane groups. The two WBT lanes (lane group #1) have a total volume…

Q: At a signalized intersection approach (northbound), the speed limit is 45 mph. The width of the…

A: Traffic engineering and transportation engineering has developed various techniques for safety…

Q: If the travel time delay on a signalized intersection approach is 10 sec/veh, the stopped time delay…

A: given-travel time delay td=10 sec/veh

Q: An intersection has a three-phase signal shown in the graph below. if he intersection deceleration…

A: Given data, Width of section W = 18.3 m (E-W approach) Speed of vehicle V = 55 km/hr = 15.3 m/s…

Q: a) Estimate the average uniform delay for this approach

Q: A right-turn-only lane at the west-east approach to a signalized intersection can store a maximum of…

Q: 4) Traffic on the eastbound approach of a signalized intersection is traveling at 35 mi/hr, with a…

A: Given data:- The speed of the vehicle at a signalized intersection, V1=35 mi/hr The density of a…

Q: b- A 4 lane, 2 in each direction if the maximum capacity in each direction is 2000 veh/hr. the…

A: Average length occupied by a vehicle (L) = 6.25 m Maximum capacity in a direction = 2000 veh/hr =…

Q: An approach at a signalized intersection with a 60-second cycle gets 30 seconds of displayed green…

A: The given data is shown below: Cycle time=60 sGreen time=30 sYellow time=4 sAll-red time=2…

Q: An approach at a signalized intersection with a 75-second cycle gets 26.25 seconds of displayed…

Q: Determine the safe distance travelled by a vehicle before coming to a full stop having an initial…

Q: Where you have to put a warning sign for checkpoint if the design speed is 100km/hr, deceleration…

A: This question is from Transportation Engineering.

Question

1. One driver is driving on a 3% upgrade roadway with an initial speed of 80 mph, assuming his
perception-reaction time is 2 seconds, do the following:
a. If the driver has to slow down to 0 mph to completely stop in front of an intersection.
A stop warning sign for the intersection is clearly visible for a distance of 100 ft. How far
in advance of the intersection must the sign be posted in order to insure that vehicles
can safely stop, using deceleration rate=9 ft/sec²?
b. Redo part a with the default deceleration rate.
C. Redo part a, assuming deceleration rate is unknown but the friction factor=0.2.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Introduce the problem statement

VIEW

Step 2: Compute perception-reaction distance

VIEW

Step 3: Compute braking distance

VIEW

Step 4: Sight stopping distance for case-I

VIEW

Step 5: Sight stopping distance for case-II

VIEW

Step 6: Sight stopping distance for case-III

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 7 steps with 8 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A driver with 20/20 vision traveling at 55 mph in the median lane desires to exit the freeway at the exit ramp. If 5-in. letters are used, what is the minimum distance the sign should be placed ahead of the ramp exit? (Some assumptions that would be helpful are perception-reaction time = 2 sec; exit speed = 30 mph; deceleration rate = 4.80 ft/s2 a driver with 20/20 vision can read a sign at 55 ft per inch of letter height.) Discuss your results.
Q2: What are the assumptions for using the equations in the queue test? Q3: A signalized intersection, of 105 sec cycle length, the east approach has an effective green time of 20 sec, and the percentage of vehicles arriving during green time is 28%. The west approach has 16 sec green time and 32% of vehicles arriving during the green time. Determine which approach is best coordinated with the upstream signal.
Where you have to put a warning sign for checkpoint if the design speed is 100km/hr, deceleration rate is 3.4m/s² with downgrade 2.5%, and driver reaction time is 0.50 sec?
An intersection has four symmetrical approaches. The width (curb-to-curb distance) of each approach is 57 ft. If the length of the design vehicle is 19.4 ft and the design speed is 35 mph, what should be the all-red time? Group of answer choices 1.25 sec 1.75 sec 1.50 sec 2.0 sec
Recent computations at an approach to a pretimed-signalized intersection indicate that the volume-to-capacity ratio is 0.8, the saturation flow rate is 1600 veh/h, and the effective green time is 50 seconds. If the uniform delay is 11.25 seconds per vehicle, determine the arrival flow rate (in veh/h) and the cycle length.
I need the answer quickly
Compute the intermediate sight distance for a freeway with a design speed of 80kph if the perception time is assumed to be 2.5 seconds with a skid resistance of 0.70. Assume brake efficiency to be 60%.
Determine whether a T intersection (one leg on the minor approach) with the hourly volume data satisfy MUTCD Warrant 3 (peak-hr vehicular volume) for signalization. All approaches have one lane entering the intersection. For the warrant that is met, explain how the warrant is met (rules applied, hours in which the volume criteria were met, etc.) and refer to necessary graphs and tables. The major street speed limit is 60 km/h, and the minor street speed limit is 40 km/h.
(b) An approach to a pretimed signal has 25 seconds of effective green in a 60-second cycle. The approach volume is 500 vph and the saturation flow rate is 1400 vph. Calculate the average vehicle delay assuming D/D/1 queuing.
Subject: transportation engineering Read the question carefully and give me right solution according to the question. A signal has four phases, where the critical lane group flow ratios are 0.115, 0.204, 0.099, and 0.248. If the lost time per phase is 6 seconds and the critical intersection v/c ratio is 0.88, calculate the minimum cycle length and the phase effective green times such that the lane group v/c ratios are equal.
What distance will a vehicle travel before coming to a complete stop from a speed of 70 mph, (a) When the vehicle is traveling on a level roadway with no grade, (b-1) When the vehicle is traveling uphill on a roadway of constant grade = 0.10, (b-2) If the roadway grade is not constant but starts at 0.10 uphill and decreases to 0 at a continuous rate, would the braking distance be equal to, greater than, or less than that in the case of a constant 0.10 uphill grade (briefly explain why) (c) When the vehicle is traveling downhill on a roadway of constant grade = 0.10. Assume a perception-reaction time of 2.5 seconds, and an a/g value equal to 0.35.
An intersection has a three-phase signal with the movements allowed in each phase and corresponding analysis and saturation flow rates shown in the table below. Assume the lost time is 4 seconds per phase and a critical intersection v/c of 0.90 is desired. O 15.552 sec O 11.462 sec O 14.825 sec Phase O 16.065 sec Allowed movements Analysis flow rate Saturation flow rate Using v/c equalization ratio, calculate the effective green time for phase 3 1 NB L, SB L 330, 365 veh/h 1700, 1750 veh/h 2 NB T/R, SB T/R 1125, 1075 veh/h 3400, 3300 veh/h EB L, WB L 110, 80 veh/h 650, 600 veh/h 3 EB T/R, WB T/R 250, 285 veh/h 1750, 1800 veh/h