One and of a uniform 3.30-m-long rod of weight is supported by a cable at an angle of 8-37 with the rod. The other end rests against a wall, where it is held by friction (see figure). The coefficient static friction between the wall and the rod is ,-0.525. Determine the minimum distance from point at which an additional weight w (the same as the weight of the rod) can be hung without causing the rod to sp at point x Your response differs from the correct answer by more than 10% Double check your calculations, m

One and of a uniform 3.30-m-long rod of weight is supported by a cable at an angle of 8-37 with the rod. The other end rests against a wall, where it is held by friction (see figure). The coefficient static friction between the wall and the rod is ,-0.525. Determine the minimum distance from point at which an additional weight w (the same as the weight of the rod) can be hung without causing the rod to sp at point x Your response differs from the correct answer by more than 10% Double check your calculations, m

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 38P: A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the...

See similar textbooks

Related questions

Q: One end of a uniform 3.40-m-long rod of weight F, is supported by a cable at an angle of 8-37" with…

Q: The figure shows three boards clamped together. The center board weighs 93.5 N, and the coefficient…

A: The figure shows the force acting on the three boards clamped together.

Q: One end of a uniform -3.60-m-long rod of weight wis supported by a cable at an angle of 37 with the…

Q: A uniform board is suspended from a ceiling and supported horizontally by two wires, A and B. The…

A: Draw the free body diagram

Q: One end of a uniform € = 4.60-m-long rod of weight w is supported by a cable at an angle of 9 = 37°…

A: Length, l = 4.60 m Angle, θ = 37° Friction coefficient, μ = 0.455 Weight = w

Q: A 350 N uniform boom is supported by a perpendicular cable attached at 0.7 its length from the…

A: Weight of rod = 350 Nength of rod =0.7 θ =60° Mass of boom=1050N

Q: Determine the minimum distance x from point A at which an additional weight w (the same as the…

Q: A person with weight 900 N stands d = 4.00 m away from the wall on al = 6.00 m beam, as shown in thi…

A: Given: The weight of the person is 900 N. The distance of the person from the wall is 4…

Q: One end of a uniform = 3.80-m-long rod of weight w is supported by a cable at an angle of 9 = 37°…

Q: A person with weight 900 N stands d = 4.00 m away from the wall on a l = 6.00 m beam, as shown in…

A: Given: Wp=900N, d=4m, l=6m, Wb=2000N, ϕ=30° Refer to the figure below : Here, R is the hinge force.…

Q: One end of a uniform rod with weight length L = 4m, and weight Fg is supported by a cable at an end…

A: Draw the free-body diagram of the rod.

Q: One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an…

A: Given Data : The weight of the rod is given as w = 73.5N. The length of the rod is given as L =…

Q: One end of a uniform = 4.30-m-long rod of weight w is supported by a cable at an angle of 837° with…

Q: One end of a uniform ℓ = 4.70-m-long rod of weight w is supported by a cable at an angle of ? = 37°…

Q: One end of a uniform 3.70-m-long rod of weight Fg is supported by a cable at an angle of ? = 37°…

A: The objective of this question is to find the minimum distance from point A at which an additional…

Q: A horizontal plank 4.00 m long and having mass 20.0 kg rests on two supports, one at the left end…

A: Given the mass of the object = m = 20.0 kgthe length of the plank = L = 4.00m one support at the…

Q: One end of a uniform ℓ = 4.50-m-long rod of weight w is supported by a cable at an angle of θ =…

Q: One end of a uniform meter stick is placed against a vertical wall. The other end is held by a…

A: Given: Length of a meter stick =1 m Coefficient of friction between the wall and scale=…

Q: One end of a uniform beam of length L=3mandweight 185 Nis connected to a vertical wall with a cable.…

Q: A uniform, 8.0-m, 1500-kg beam is hinged to a wall and supported by a thin cable attached 2.0 m from…

A: Concept used: Force gets split into horizontal and vertical components .

Q: eter stick is placed against a vertical wall. The other end is held by a lightweight cord that makes…

A: One end of a uniform meter stick is placed against a vertical wall. The other end is held by a…

Q: weight angle o above the rod. The other end rests on a small frictionless support and presses into a…

A: given:weight of rod, w = 74.0 Nlength L = 2.85 mtension in the cable = Langle = 340

Q: A uniform 22 kg beam, 3.0 m long, is attached to a wall on the left by a hinge, and is supported by…

Q: One end of a uniform ℓ = 4.50-m-long rod of weight w is supported by a cable at an angle of θ = 37°…

A: Given: The length of the rod is l = 4.50 m.

Q: 7. A uniform ladder of mass (m) and length (L) leans against a frictionless wall, see figure. If the…

Q: One end of a uniform 3.70-m-long rod of weight F is supported by a cable at an angle of 8 = 37° with…

Q: 1001 N uniform beam is attached to a vertical wall at one end and js supported by a cable at the…

Q: One end of a uniform = 3.40-m-long rod of weight w is supported by a cable at an angle of 8 = 37°…

A: Weight of uniform rod: w Length of uniform rod: l = 3.4 m Distance from the wall center of mass of…

Q: One end of a uniform 4.0-m-long rod of weight w is supported by a cable (at 37 degrees from the…

A: Minimum value of x = 2.8m

Q: One end of a uniform 4.30-m-long rod of weight F, is supported by a cable at an angle of = 378 with…

Q: A safe mass M = 430kg hangs by a rope from a boom has a mass m = 85kg. Find the tension T, in the…

Q: One end of a uniform { = 4.30-m-long rod of weight w is supported by a cable at an angle of 0 = 37°…

Q: A 100-N board 12-m long, rests on two supports, one support is 1m from the end and other is 3 m from…

A: Rotational equilibrium is defined as the state of a system for which the total angular acceleration…

Q: 1. A uniform 22 kg beam, 3.0 m long, is attached to a wall on the left by a hinge, and is supported…

A: Torque acting on an object is defined as the product of perpendicular force to the distance from the…

Q: A 1.2-m plank of mass 3 kg rests on two joists. Knowing that the coefficient of static friction…

A: Part-a The length of the plank l = 1.2 m. The mass of the plank m = 3 kg. The coefficient of static…

Concept explainers

Rotational Equilibrium And Rotational Dynamics

In physics, the state of balance between the forces and the dynamics of motion is called the equilibrium state. The balance between various forces acting on a system in a rotational motion is called rotational equilibrium or rotational dynamics.

Equilibrium of Forces

The tension created on one body during push or pull is known as force.

Question

One and of a uniform 3.30-m-long rod of weight w is supported by a cable at an angle of 8-37 with the rod. The other end rests against a wall, where it is held by friction (see figure). The
coefficient of static friction between the wait and the rod is ,-0.525. Determine the minimum distance from point A at which an additional weight w (the same as the weight of the rod) can
be hung without causing the rod to slip at point A
275
x
Your response differs from the correct answer by more than 10% Double check your calculations, m
Subnd Arower

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Determine to given and asked variable

VIEW

Step 2: free body diagram and moment of point A

VIEW

Step 3: calculation the minimum distance

VIEW

Step 4: solution continue ..

VIEW

Solution

VIEW

Step by step

Solved in 5 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the wall and the other end of the strut is attached to a sign that weighs 200.0 N The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the s find the tension in the cable and the force at the hinge of the strut.
Show that, as explained in the text, a force F exerted on a flexible medium at its center and perpendicular to its length (such as on the tightrope wire in Figure 5.26) gives rise to a tension of magnitude T=F/2sin() .
Check Your Understanding A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by a cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.
When tightening a bolt, you push perpendicularly on a wrench with a force of 165N at a distance of 0.140m from the center of the bolt. How much torque are you exerting relative to the center of the bolt?
Check Your Understanding A 50-kg person stands 1.5 m away from one end of a uniform 6.0-m-long scaffold of mass 70.0 kg. Find the tensions in the two vertical ropes supporting the scaffold.
One end of a uniform 3.40-m-long rod of weight F, is supported by a cable at an angle of 637° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of static friction between the wall and the rod is ,-0.565. Determine the minimum distance x from point A at which an additional object, also with the same weight can be hung without causing the rod to slip at point A.
The box B weighs 100 lb. (a) If the supports are smooth (there is no friction between the supports and cable), what is the force F? (b) The coefficient of friction between the cable and the fixed round supports is µs=0.4. What is the minimum force F required to lift the box?
Ggg
The rigid arm of negligible weight shown in the figure supports a load of F-901 N. The chains are fixed to the wall at points DvE and support A is of the bal-and socket type (spherical). Find the Magnitude of the Fed Force X₂-3 m y 6m 2-5m E X2 F
The weightless strut in the figure below is not attached to the wall; it is prevented from falling only by friction. (Let w = 365 N, L = 4.45 m and h = 2.95 m.) (a) Find the magnitude of the force of friction between the wall and the strut.(b) Find the normal force exerted by the wall on the strut.(c) Find the minimum coefficient of static friction.
How much compression acts on the hip during two-legged standing, given that the joint supports 250 N of body weight and the abduct muscles are producing 600 N of tension? What is the angle α of R?
To facilitate shifting the position of a lifting hook when it is not under load, the sliding hanger shown is used. The projections at A and B engage the flanges of a box beam when a load is supported, and the hook projects through a horizontal slot in the beam. The connections at A and B are smooth. Compute the magnitudes of the forces at A and B when the hook supports a 200-kg mass Assumem - 200 kg, a-280 mm, b-415 mm. Answers: a N N