lon selective electrode (ISE) is an electrochemical device for the selective determination of the concentration/activity of an ion based on the principle of potentiometry. Typical examples include pH electrodes and the fluoride ISE. To use an ISE, the potential of the ISE is first measured with a range of solutions containing different concentrations of the analyte. Then, a calibration curve is constructed by plotting the potential versus log₁0[ion]. For an ideal Ca²+ ion selective electrode, which of the following slopes is the one that you would expect? (T = 25 °C) Select one: O a. -30 mV/dec O b. 30 mV/dec O c. 59 mV/dec O d. -59 mV/dec

lon selective electrode (ISE) is an electrochemical device for the selective determination of the concentration/activity of an ion based on the principle of potentiometry. Typical examples include pH electrodes and the fluoride ISE. To use an ISE, the potential of the ISE is first measured with a range of solutions containing different concentrations of the analyte. Then, a calibration curve is constructed by plotting the potential versus log₁0[ion]. For an ideal Ca²+ ion selective electrode, which of the following slopes is the one that you would expect? (T = 25 °C) Select one: O a. -30 mV/dec O b. 30 mV/dec O c. 59 mV/dec O d. -59 mV/dec

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

To determine the pH of bile (from the bladder), a hydrogen-silver chloride chain was drawn up, the emf of which was equal to 0.577 V. The measurement was carried out at 298 K, the electrolyte concentration in the reference electrode was 1 mol / l. Determine the pH.
If at 25°C the standard electrode potential of the Ag/Ag electrode is 0.799 V, and the equilibrium çonstant for the reaction Fe+ Ag k Fe?+ Ag" is 0.531mol L, Calculate the standard Fe2"/Fe electrode potential.
A hydrogen electrode is immersed in a 2.0 M solution of acetic acid at 25 °C. This electrode is connected to another consisting of an iron nail dipping into 2.0 M FeCl2. What will be the measured potential of this cell? Assume PH2 = 1.00 atm. Ecell = i V
A student constructs an electrochemical cell with a half-cell composed of a nickel anode in a 0.10 M Ni2+(aq) solution, and another composed of a silver cathode in a 0.10 M Ag+(aq) solution. The Ecell at 20oC (293K) is measured as +1.03 V. Calculate the experimental standard cell potential, Eocell, for the reaction
What do you mean by ( i) negative standard electrode potential and(ii) positive standard electrode potential ?
Permanganate ion can oxidize sulfite to sulfate in basic is 0.000 V at pH 5 0.00, what is the potential of the same electrode at pH 5 7.00?17.52. Glucose Metabolism The standard potentials for the reduction of nicotinamide adenine dinucleotide (NAD1) and oxaloacetate (reactants in the multistep metabolism of glucose) are as follows: NAD1(aq) 1 2 H1(aq) 1 2 e2 S NADH(aq) 1 H1(aq)E° 5 20.320 V Oxaloacetate(aq) 1 2 H1(aq) 1 2 e2 S malate(aq)E° 5 20.166 V Calculate the standard potential for the following reaction: Oxaloacetate(aq) 1 NADH(aq) 1 H1(aq) S malate(aq) 1 NAD1(aq) Calculate the equilibrium constant for the reaction at 298 K. in the reaction vessel in which PClO 5 2.0 atm and PCl 5 1.00 atm. Calculate [ClO32]2 if, at equilibrium, 2 (g) partial pressure of NO 5 0.00150 atm.17.56. Chlorine dioxide (ClO2) is produced by the following reaction of chlorate (ClO 2) with Cl2 in acid solution: 3 2 ClO 2(aq) 1 2 Cl2(aq) 1 4 H1(aq) S3 2 ClO2(g) 1 Cl2(g) 1 2 H2O(/)…
To find the standard potential of M3+/M electrode, the following cell is constituted: Pt|M|M3+(0.0018 mol-1L)||Ag+(0.01 mol-1L)|Ag The emf of this cell is found to be 0.42 volt. Calculate the standard potential of the half reaction M3+ + 3e- M3+. = 0.80 volt.
Calculate the electrode potential of the semi-cell containing potassium dichromate, K2Cr2O7 0.1 mol / L and chromium nitrate, Cr (NO3) 3 0.05 mol / L in a solution of pH = 2.00.
A hydrogen electrode is immersed in a 2.2 M solution of acetic acid at 25 °C. This electrode is connected to another consisting of an iron nail dipping into 2.2 M FeCl2. What will be the measured potential of this cellI? Assume PH2 = 1.00 atm. Erell = i V
The saturated calomel electrode, abbreviated SCE, is often used as a reference electrode in making electrochemical measurements. The SCE is composed of mercury in contact with a saturated solution of calomel (Hg₂Cl₂). The electrolyte solution is saturated KCI. SCE is +0.242 V relative to the standard hydrogen electrode. Calculate the potential for each of the following galvanic cells containing a saturated calomel electrode and the given half-cell components at standard conditions. In each case, indicate whether the SCE is the cathode or the anode. Standard reduction potentials are found in the Standard Reduction Potentials table. (a) AgCl + e → Ag + CI V SCE role: O cathode anode (b) Zn2+ + 2e → Zn SCE role: O cathode Oanode (c) Fe³+ + e→→ Fe²+ 8⁰ SCE role: O cathode O anode V V
The F− concentration of a solution was determined by measurements with a liquidmembrane electrode. The electrode system developed a potential of 0.5021 V when immersed in 25.00 mL of the sample, and 0.4213 V after the addition of 2.00 mL of 5.45 x 10−2 M NaF. Calculate pF for the sample.
A cell consisting of two silver plates dipping in a 0.1 M and 0.01 M solution of silver nitrate AgNO3 respectively at 25 °C. 1- diagram the cell, 2- write the cell reaction 3- Calculate the cell potential