Question 3Liquid water at 100 kPa and 25°C is heated in a chamber by mixing it with superheated steam at 100kPa and 300°C. Liquid water enters the mixing chamber at a rate of 3.4 kg/s, and the chamber is estimatedto lose heat to the surrounding air at 25°C at a rate of 2100 kJ/min. If the mixture leaves the mixingchamber at 100 kPa and 75°C, determine (a) the mass flow rate of the superheated steam, (b) the exergydestruction during this mixing process, (c) the exergy recovered during this mixing process and (d) thesecond-law efficiency of the mixing chamber.2100 kJ/min25°C3.4 kg/sMixingchamber75°C100 kPa300°C

Given: P= 100 kPa TO determine: Mass flow rate of the superheated steam Exergy destroyed

chamber at 100 kPa and 75°C, determine (a) the mass flow rate of the superheated steam, (b) the exergy destruction during this mixing process, (c) the exergy recovered during this mixing process and (d) the

chamber at 100 kPa and 75°C, determine (a) the mass flow rate of the superheated steam, (b) the exergy destruction during this mixing process, (c) the exergy recovered during this mixing process and (d) the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

It is proposed to have carbon dioxide (CO2) gas pass through an uninsulated nozzle. The CO2 is to enter at 307 K, 400 kPa, at a velocity of 6 m/s. The CO2 is to exit the nozzle at 382 K, 105 kPa, and a velocity of 115 m/s. The mass flow rate of the CO2 is 0.25 kg/s. The nozzle surface is maintained at 350 K. The change in specific entropy is____ k..... to 40.864 d.p. Use cold-air standard analysis and Take R= 0.1889 kJ/kgK and Cp=0.846 kJ/kgK Provide the unit symbol.
Steam enters an adiabatic turbine at 5 MPa and 500°C with a 50 m/s velocity and exits from the turbine at 100 kPa and 75 m/s velocity. The power output of the turbine is 5 MW and the isentropic efficiency is 80%. Determine, a) The mass flow rate of the steam passed through the turbine. b) The temperature at the turbine exit. c) The rate of entropy generation during this process.
Thermodynamic
Rate of entropy generation
Carbon steel balls (ρ = 7833 kg/m3 and cp = 0.465 kJ/ kg·°C) 8 mm in diameter are annealed by heating them first to 900°C in a furnace and then allowing them to cool slowly to 100°C in ambient air at 35°C. If 1200 balls are to be annealed per hour, determine the rate of exergy destruction due to heat loss from the balls to the air.
2. Steam enters an adiabatic turbine steadily at 5 MPa and 500 °C and leaves at 50 kPa as saturated vapor. If the mass flow rate of the steam is 5 kg/s, determine the rate of entropy generation in this process, in kW/K. 6.9781 0.615 7.5931 3.075
In an evaporator of an air conditioning system, R134a enters at a quality of 0.2 and exits as saturated vapor at a temperature of -10 C. Air enters the evaporator unit at a temperature of 33 C and exits at 17 C with a mass flow rate of 0.3 kg/s. Calculate the rate of exergy destroyed in the evaporator in kW. Take the surrounding temperature to be 35 C. Hint: You will need to calculate the refrigerant mass flow rate first by taking the entire evaporator as a system and writing the first law of thermodynamics.
8 kg/s of R134a is condensed from 700 KPa and 70 °C to saturated liquid at 700 KPa in a water- cooled condenser. Water as compressed liquid enters the cooler at 15 °C and leaves at 25 °C. Determine the mass flow rate of the cooling water, in kg/s.
It is proposed to have carbon dioxide (CO2) gas pass through an uninsulated nozzle. The CO2 is to enter at 284 K, 430 kPa, at a velocity of 4 m/s. The CO2 is to exit the nozzle at 343 K, 82 kPa, and a velocity of 130 m/s. The mass flow rate of the CO2 is 0.25 kg/s. The nozzle surface is maintained at 395 K. The rate of entropy generation for the proposed process is ____ kW..... to 4 d.p. Use cold-air standard analysis and Take R= 0.1889 kJ/kgK and Cp=0.846 kJ/kgK
Steam enters a turbine at 100 bars and 400°C. At the exit the pressure is 1.0 bar and the entropy has increased by 0.600 kJ/kg K under adiabatic conditions. The changes in kinetic and potential energies may be neglected. (a) Determine the work, in kJ/kg. For the same initial conditions and final pressure the turbine is now run without insulation. The entropy production due to internal irreversibilities is assumed to be the same as in part (a). However, the environment at 300 K is found to have an entropy change of +0.0800 kJ/(kg steam) · K. Also, the entropy change of the steam due to heat exchange with the environment has an absolute value of 0.0460 kJ/kg · K. (b) Determine the quality of the steam at the turbine outlet, and compare to the answer from part (a). Also, (c) determine the heat transfer to the environment, in kJ/kg steam, and (d) find the amount of work output of the turbine, in kJ/kg, and compare to part (a).
A boiler produces 5.4 tonnes/hour of steam at a pressure of 1.5 MPa and a temperature of 350°C. Feedwater enters at a temperature of 44.5°C. At exit from the economizer part of the boiler the temperature is 93.5°C. At exit from the evaporator part of the boiler the steam is 90 A % dry. Energy is supplied by 600 kg of coal per hour, which has a calorific value of 32 MJ/kg. The A/F ratio is 15 1. The temperature of the flue gas at exit from the the economizer part of the boiler is 210°C. The average specific heat at constant pressure of the in the economizer is 1045 J/kg.K. When the ambient temperature is 24°C : 7. IS flue gas 7.1 Calculate the efficiency of the boiler. [83.3 %] Calculate the equivalent evaporation from and at 100°C per unit mass of fuel. |11.9| Draw up an energy balance, on a kJ/kg coal basis, with percentages of the total energy supplied. Jeconomizer 6.8 %, evaporator 62 %, superheater 15.5 %, to atmosphere 9.7 %, other 7.2 7.3 losses 7 %]
Could you show how to interpolate?