Laboratory results on a soil have shown that its unconfined compressive strengthis 1.2 kg/cm2. In a triaxial compression test a specimen of the soil whensubjected to a chamber pressure of 0.4 kg/cm² failed at an additional stressof 1.6 kg/cm2. Estimate the shearing strength of the same soil along a horizontalplane at a depth of 4m in a deposit. The ground water table is at a depth of 2.5mfrom the ground level. Take dry unit weight of soil as 1.7 gm/cc and specific gravity as 2.7

Given,Uncomfined compressive strength,qu=1.2 kg/cm2Chamber pressure,σ3=0.4 kg/cm2Additional stress,…

Laboratory results on a soil have shown that its unconfined compressive strength is 1.2 kg/cm2. In a triaxial compression test a specimen of the soil when subjected to a chamber pressure of 0.4 kg/cm² failed at an additional stress of 1.6 kg/cm². Estimate the shearing strength of the same soil along a horizontal plane at a depth of 4m in a deposit. The ground water table is at a depth of 2.5m from the ground level. Take dry unit weight of soil as 1.7 gm/cc and specific gravity as 2.7

Laboratory results on a soil have shown that its unconfined compressive strength is 1.2 kg/cm2. In a triaxial compression test a specimen of the soil when subjected to a chamber pressure of 0.4 kg/cm² failed at an additional stress of 1.6 kg/cm². Estimate the shearing strength of the same soil along a horizontal plane at a depth of 4m in a deposit. The ground water table is at a depth of 2.5m from the ground level. Take dry unit weight of soil as 1.7 gm/cc and specific gravity as 2.7

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

In an Oedometer apparatus, a specimen of fully saturated clay has been consolidated under a vertical pressure of 50 kN/m2 and is presently at equilibrium. The effective stress and pore water pressure immediately on increasing the vertical stress to 150 kN/m2, respectively are...?
A standard specimen of cohesionless sand was tested in triaxial compression test and the sample field at a deviator stress of 450 KN/ sq-m, when the cell pressure was 100 kN/sq-m under drained condition. Find the effective angle of shearing resistance of sand. what would be the deviator stress and the Major principle stress at the failure of another identical specimen of sand if it is tested under a cell pressure of 200 KN/ sq-m ?
.
Shear Strength In a UU Triaxial compression test on a = 0 soil, failure was observed at a deviatoric stress of 60 kN/m² under a confining stress 50 kN/m2 of the confining stress is increased to 100 kN/m², the deviatoric stress at failure is
4. Please answer parts a and b
How to solve this question?
Calculate this one..,
In an Oedometer apparatus, a specimen of fully saturated clay has been consolidated under a vertical pressure of 50 kN/m2 and is presently at equilibrium. The effective stress and pore water pressure immediately on increasing the vertical stress to 150 kN/m2, respectively are...?
a sample of dry sand is tested in direct shear. the shear box holding the same has a circular cross section with a diameter of 50 mm. The normal compressive load imposed is 200N. The sample shears when the shear force is 120N. Compute the Normal stress, Shear test at failure Angle ofninternal friction of this soil.
A saturated specimen of cohesionless sand was tested under drained conditions in a triaxial compression test apparatus and the sample failed at a deviator stress of 482 kN/m2 and the plane of failure made an angle of 60° with the horizontal. What would be the magnitude of the deviator stress in kPa at failure for identical specimen of sand if it is tested under a cell pressure of 200 kPa? a. 200 b. 241 c. 400 d. 600
In a consolidated undrained test with pore pressure measurement on a normally consolidated clay, a sample consolidated under a stress of 200 kPa failed at an additional axial stress of 150 kPa. The pore pressure at failure was 75 kPa. Determine analytically the shear strength parameters in terms of effective stresses.
c. An undisturbed soil sample, 110 mm in diameter and 220 mm in height, was tested in a triaxial machine. The sample sheared under an additional axial load of 3.35 kN with a vertical deformation of 21 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m². i. Draw the Mohr circle diagram representing the above stress conditions, and from it determine: - Coulomb's equation for the shear strength of the soil, in terms of total stress; - the magnitude and obliquity of the resultant stress on the failure plane. ii. A further undisturbed sample of the soil was tested in a shear box under the same drainage conditions as used for the previous test. If the area of the box was 3600 mm² and the normal load was 500 N, what would you expect the failure stress to have been?