Answered: kg. 12 m1 1 | bartleby

Related questions

Question

ASAP 66.

m2 = 3.9 kg.
A force of 17.3 N is applied to accelerate the system shown, m₁ = 11.9 kg.
Calculate the acceleration of each mass.
a=
m/s²
ܕܐܐܐ
m₁

Expert Solution

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

How much energy is necessary to assemble 2 charges of 2.0C at the distance of 2.0 cm?
If: C1 = 32.9 pF, C2= 29.0 pF, C3= 54.5 pF, C4= 25.4 pF,and V= 27.6 V How much charge is on the top plate of C1? Answer in pC to the nearest pC.
How far apart (in m) are two conducting plates that have an electric field strength of 3.00 ✕ 103 V/m between them, if their potential difference is 14.5 kV?
Please do number 8.
Compute the heat generated while transferring 96000 coulomb of charge in one hour through a potential difference of 50 V.
identify the unkown particle X and X1 a. X + 4 / 2 He → 24 / 12 Mg +1 / 0 n b. 235 / 92 U + 1 / 0 n → 90 / 38 Sr + X + 2(1 / 0 n) c. 2(1 /1 H) → 2 / 1 H + X + X1
In an inkjet printer, letters and images are created by squirting drops of ink horizontally at a sheet of paper from a rapidly moving nozzle. The pattern on the paper is controlled by an electrostatic valve that determines at each nozzle position whether ink is squirted onto the paper or not. Figure 9 Do 163 Ē T 1 of 1 The ink drops have a mass m = 1.00×10-11 kg each and leave the nozzle and travel horizontally toward the paper at velocity = 24.0 m/s. The drops pass through a charging unit that gives each drop a positive charge q by causing it to lose some electrons. The drops then pass between parallel deflecting plates of length Do = 1.50 cm, where there is a uniform vertical electric field with magnitude E= 8.15x104 N/C. (Figure 1) Part A If a drop is to be deflected a distance d = 0.250 mm by the time it reaches the end of the deflection plate, what magnitude of charge q must be given to the drop? Assume that the density of the ink drop is 1000 kg/m³, and ignore the effects of…