INTERPOLATING CONTOURS ANALYTICALLY. Using a suitable scale, plot a rectangular area 5435 m (length of side AB) by 2795 m (length of side BC). The elevation at the center of the area is 265 m and the elevation of corners A, B, C, and D being 163, 191,315, and 224 m, respectively. By the analytical method, plot the contours at 20-m interval, Designate contours 200 and 300 as index contours.

INTERPOLATING CONTOURS ANALYTICALLY. Using a suitable scale, plot a rectangular area 5435 m (length of side AB) by 2795 m (length of side BC). The elevation at the center of the area is 265 m and the elevation of corners A, B, C, and D being 163, 191,315, and 224 m, respectively. By the analytical method, plot the contours at 20-m interval, Designate contours 200 and 300 as index contours.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

ROUTE Surveying
The distance scaled on a 1:9,500 map between two adjacent contours is 37mm. Determine the slope of the ground in mils if the contour interval is 2 meters.
*refer from the illustration attached* determine: (a) Resolve the attached problem if the vertical distance between contour levels is 2.0m. Which has a larger value of volume? Make a conclusion of your answer. ***COMPLETE SOLUTION; 3 decimal places all answer; with Diagram.
The following data is given. DETERMINE SPOT HEIGHTS FROM CONTOURS i. Higher contour is 100.830 ii. Lower contour is 100.580 iii. Distance from higher contour to grid is 24 mm iv. Distance between contours is 34 mm
1. Solve the traverse partitioning. Plot and label the traverse. Provide a step-by-step solution and a handwritten calculation. Attached above is the given and the sample problem.
ROUTE SURVEYING
5. A closed traverse with 5 corners has field measured interior angles at each corner as follows, adjust the angles at each corner, equally balanced. A= 101° 28' B= 102° 11’30" C= 104° 42' D=113° 05'30" E= 118° 34' A= B= C= D= E=
The following perpendicular offsets were taken from a survey distance (m) 0 55 5 70 10 15 30 40 20 Offset (m) 3.92 4.32 3.29 4.05 5.26 2.91 4.76 6.23 5.75 Compute the area between the survey line and an irregular boundary using trapezoidal rule or Simpson's rule. 3 line.
Q.1) A building (30 m x 20 m) in dimensions is to be built on a hilly terrain with foundation elevation (30 m), the areas bounded by contours were measured from a map (scale 1:500) and found to be: svode sb to snor (b) Contour elevation (m) 35 34 33 32 31 30 29 28 Area bounded cm² 6.2 7.4 9.6 10.8 13.2 15.4 17.6 19.4
please help