Instructions: Using packet tracer design and configure the following network. Determine gateway address, device address and subnet mask for each leg. Topology 1) 2 2811 routers (add a serial port to each router) Router1, Router2 2)2-2960 switches (Connect Switch 1 to Router1, Connect Switch2 to Router2) 3) 2-End Devices (Connect Computer 1 to Switch 1, Connect Coomputer2 to Switch2) Subnet the following Network ID: 192.168.100.0/27 • Use the 1st subnet for Router1 (configure an IP address on the End Device and the Router) • Use the 2nd subnet for Router2 (configure an IP address on the End Device and the Router) • Use the 3rd subnet for Router 1 to Router2 Addressing Configure Static Route Protocol to communicate from Router1 to Router2. Ping from End to End

Instructions: Using packet tracer design and configure the following network. Determine gateway address, device address and subnet mask for each leg. Topology 1) 2 2811 routers (add a serial port to each router) Router1, Router2 2)2-2960 switches (Connect Switch 1 to Router1, Connect Switch2 to Router2) 3) 2-End Devices (Connect Computer 1 to Switch 1, Connect Coomputer2 to Switch2) Subnet the following Network ID: 192.168.100.0/27 • Use the 1st subnet for Router1 (configure an IP address on the End Device and the Router) • Use the 2nd subnet for Router2 (configure an IP address on the End Device and the Router) • Use the 3rd subnet for Router 1 to Router2 Addressing Configure Static Route Protocol to communicate from Router1 to Router2. Ping from End to End