In the late 1800's, twenty-five percent of the world's nickel production came from Nickel Mines, Pennsylvania. In one mining operation, nickel ore was loaded on carts that rolled on frictionless rails that ranfrom the dig-site, through the level mine, and were then pulled up a mine shaft inclined at 21.00 above the horizontal by a cable connected to a winch.at the bottom of a 1100 m long ramp and was accelerated at a constant acceleration to a speed of 2.20 m/s in 13.0 s and then continued at this constant speed to the top of the ramp.loaded ore car with a mass of 810 kg started from rest(a) Determine the maximum power the winch motor provides while the cart is accelerating.W(b) Determine the power the winch motor needs to provide when the cart is moving at a constant speed.W(c) What is the total work accomplished by the winch motor by the time a loaded ore cart reaches the end of the ramp?J

Write the kinematic equation for acceleration

Answered: In the late 1800's, twenty-five percent…

Similar questions

A block with mass m = 14.9 kg slides down an inclined plane of slope angle 18.8o with a constant velocity. It is then projected up the same plane with an initial speed 2.95 m/s. How far up the incline will the block move before coming to rest?
A frictionless plane is 10.0 m long and inclined at 33.5°. A sled starts at the bottom with an initial speed of 4.70 m/s up the incline. When it reaches the point at which it momentarily stops, a second sled is released from the top of this incline with an initial speed vi. Both sleds reach the bottom of the incline at the same moment.
OK, same sort of track, but now with d = 2.66 m. Now suppose the blocks starts on the track at x = 4.35 m. The block is given a push to the left and begins to slide up the track, eventually reaching its maximum height at x = 0, at which point it turns around and begins sliding down. What was its initial speed in this case?
a skateboarder moving at 5.90 m/s along a horizontal section of a track that is slanted upward by θ = 46.0° above the horizontal at its end, which is 0.790 m above the ground. When she leaves the track, she follows the characteristic path of projectile motion. Ignoring friction and air resistance, find the maximum height H to which she rises above the end of the track.
An constant applied force of 40.1 N lifts an 2.50 kg mass straight up, resulting in a final speed of 3.6 m/s. What distance did the mass move if it was initially at rest?
A golfer hits a shot to a green that is elevated 2.60 m above the point where the ball is struck. The ball leaves the club at a speed of 17.3 m/s at an angle of 52.0° above the horizontal. It rises to its maximum height and then falls down to the green. Ignoring air resistance, find the speed of the ball just before it lands.
A 3.00 kg box slides UP a smooth (frictionless) 39-degree hill with an initial speed of 16.0 m/s. To what maximum height above the bottom of the hill does the box reach before stopping?
Problem 5: Consider the vectors, D = (6.00î - 8.00j) m, B = (-8.00î + 3.00j) m, and A = (26.0î + 19.0j) m.
A boy shoves his stuffed toy zebra down a frictionless chute. It starts at a height of 1.63 m above the bottom of the chute with an initial speed of 1.41 m/s . The toy animal emerges horizontally from the bottom of the chute and continues sliding along a horizontal surface with a coefficient of kinetic friction of 0.273 . How far from the bottom of the chute does the toy zebra come to rest? Assume ?=9.81 m/s2 .
OK, same sort of track, but now with d = 2.80 m. Now suppose the blocks starts on the track at x = 3.20 m. The block is given a push to the left and begins to slide up the track, eventually reaching its maximum height at x = 0, at which point it turns around and begins sliding down. What was its initial speed in this case? 8.47 m/s 5.99 m/s 10.12 m/s 4.83 m/s
A car of mass 1500 kg is pulling a trailer of mass 750 kg up a straight hill of length 800 m inclined at an angle of sin-0.08 to the horizontal. The resistances to the motion of the car and trailer are 400 N and 200 N respectively. The car and trailer are connected by a light rigid tow-bar. The car and trailer have speed 30 ms- at the bottom of the hill and 20ms- at the top of the hill. After reaching the top of the hill the system consisting of the car and trailer travels along a straight level road. The driving force of the car's engine is 2400 N and the resistances to motion are unchanged. Find the acceleration of the system and the tension in the tow-bar.
Two snowy peaks are at heights H = 800 m and h = 740 m above the valley between them. A ski run extends between the peaks, with a total length of 2.91 km and an average slope of 0 = 32° (see the figure). (a) A skier starts from rest at the top of the higher peak. At what speed will he arrive at the top of the lower peak if he coasts without using ski poles? Ignore friction. (b) Approximately what coefficient of kinetic friction between snow and skis would make him stop just at the top of the lower peak? (a) Number i (b) Number i h 0 Units Units 0 H ←

SEE MORE QUESTIONS