In an air conditioning system, the inside and outside conditions are dry bulb temperature 24°C, relative humidity 50% and dry bulb temperature 35°C, wet bulb temperature 22°C respectively. 50% of the room air is rejected to atmosphere and an equal quantity of fresh air added before air enters the air conditioning apparatus. If the fresh air added is 100 m3/min, determine: a. Room sensible and latent heat load; b. Sensible and latent heat load due to fresh air; c. Apparatus dew point; d. Humidity ratio and dry bulb temperature of air entering air conditioning apparatus. The room sensible beat factor is08

In an air conditioning system, the inside and outside conditions are dry bulb temperature 24°C, relative humidity 50% and dry bulb temperature 35°C, wet bulb temperature 22°C respectively. 50% of the room air is rejected to atmosphere and an equal quantity of fresh air added before air enters the air conditioning apparatus. If the fresh air added is 100 m3/min, determine: a. Room sensible and latent heat load; b. Sensible and latent heat load due to fresh air; c. Apparatus dew point; d. Humidity ratio and dry bulb temperature of air entering air conditioning apparatus. The room sensible beat factor is08

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

basic technique of operating a scrap machine
Describe some of the measures to achieve the maintenance objectives.
Which manufacturing machine is used for cylindrical symmetric parts? A) Drilling Machine OBILaser Cutting Machine O0ICNC turming machie (Lathej DICNC Miling Machine
B) SHAPER MACHINES Shaper operation Types of shaper Principal parts of a shaper
Based on the CNC program below, identify 1)what machine it is (lathe/mill) ? 2)is the coolant used? 3)Any pocket/holes drilling? and if yes how many? 4)How many tool(s) is/are used? N1 G90 G17 G40 G80 G00 N108 M06 T1 (1/4) N110 (F-contour) N112 G00 G54 G90 X0.8937 Y-2.0181 S6000 M03 N114 G43 H1 Z5. N116 Z1. N118 Z0.1 N120 G01 Z0. F30. N122 G03 X0.9302 Y-2.262 Z-0.0007 I0.2488 J-0.0875 F60. N124 G02 X0.9927 Y-2.4845 Z-0.0012 I-0.2631 J-0.1939 N126 G03 X0.9927 Y-2.7716 Z-0.002 I1.6354 J-0.1436 N128 G02 X0.9302 Y-2.9941 Z-0.0026 I-0.3256 J-0.0286 N130 G03 X0.8937 Y-3.2381 Z-0.0032 I0.2123 J-0.1565 N132 X2.0181 Y-4.3624 Z-0.0074 I1.7344 J0.61 N134 X2.262 Y-4.3259 Z-0.008 I0.0875 J0.2488 N136 G02 X2.4845 Y-4.2634 Z-0.0086 I0.1939 J-0.2631 N138 G03 X2.7716 Y-4.2634 Z-0.0094 I0.1436 J1.6354 N140 G02 X2.9941 Y-4.3259 Z-0.01 I0.0286 J-0.3256 N142 G03 X3.2381 Y-4.3624 Z-0.0106 I0.1565 J0.2123 N144 X4.3624 Y-3.2381 Z-0.0148 I-0.61 J1.7344 N146 X4.3259 Y-2.9941 Z-0.0154 I-0.2488…
dentify the name of the milling machine operation in which the concave contours can be produced. Straddle milling Form milling Side Milling End milling
Question 3 The Extrude Cut feature in SOLIDWORKS can be used to create both through holes (holes that go all the way through a part) and counter bore holes (holes that do not go all the way through a part), such as the holes shown in the 2-dimensional image below. True False Counterbore
Give at least 7 machine/equipment and their uses. PLEASE TYPE THE ANSWER
The term "maintenance" refers to maintaining all of the systems and features in working order. * as close as possible to the original O design purpose of the manufacturer tons as close to the manufacturer's original design purpose as impossible as impossible to the manufacturers original design intent tons. as possible to the manufacturers unoriginal design intent tons skip Punctures are- a small hole in a tire resulting in an get- away of air a large hole in a tire resulting in an get- away of air a small hole in an engine resulting in an escape of air a small hole in a tire resulting in an get- away of oil Skip
Cleaning of machine tool should be carried out once a year. Select one: O True O False
Q1. a. Define a machine tool and list all four functions. b. List all the classifications of machine tools. c. List all four methods of generating a surface.