In a steam power plant operating on ideal Rankine cycle, steam enters theturbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.127kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, Workratio and specific steam consumption in kg/kWh. Do not neglect pumpwork. You may make use of the extract of steam table given below.thgStSg(bar)(°C)kJ/kgkJ/kg20.0212.4908.81890.72.4476.3310.145.81191.832584.70.64938.1502

Given:P1=20 barh1=3384 KJ/Kgs1=7.127 KJ/Kg.KP2=0.1 bar

In a steam power plant operating on ideal Rankine cycle, steam enters turbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.12 kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, W ratio and specific steam consumption in kg/kWh. Do not neglect pump work. You may make use of the extract of steam table given below.

In a steam power plant operating on ideal Rankine cycle, steam enters turbine at 20 bar with an enthalpy of 3384 kJ/kg and an entropy of 7.12 kJ/kg K. The condenser pressure is 0.1 bar. Find the cycle efficiency, W ratio and specific steam consumption in kg/kWh. Do not neglect pump work. You may make use of the extract of steam table given below.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steam power plant works between 40 bar and 0.05 bar. If the steam supplied is dry saturated and thecycle of operation is Rankine, find :(i) Cycle efficiency (ii) Specific steam consumption
Derive the formula of efficiency of the following: a. Otto Cycle in terms of compression ratio r and specific heat ratio k
provide a step by step solution for the following question in the added image
Consider a steam power plant that operates on the ideal reheat Rankine cycle as shown in Fig. Q5. The plant maintains the boiler at 7000 kPa, the reheat section at 800 kPa, and the condenser at 10 kPa. The mixture quality at the exit of both turbines is 93 percent. Determine the temperature at the inlet of each -1 turbine and the cycle's thermal efficiency. Reheater Boiler High-P turbine Pump Low-P turbine Condenser
Please do parts A and B
2.) A Steam power plant operates using the actual Rankine Cycle where steam initially enters the turbine at 5.0 MPa and 400C then after an irreversible adiabatic process, it exits the turbine with a dryness of 0.90. It then condenses at 7 kPa and exits as saturated liquid. Draw the TS diagram, find the thermal efficiency, and steam rate.
Steam at 4268 MPa, 97% quality expands in a Rankine Engine and exhausted at 0.28 MPa. Calculate the efficiency of cycle and engine. Can you show me the detailed step by step solution?
Determine percent change in efficiency of Otto cycle when Compression ratio is changed to 12 from 8.
For each control volume analyzed, the thermodynamics model is the steam tables, the process is SSSF (steady state, steady flow), and the changes in kinetic and potential energies are negligible. Consider a reheat cycle utilizing steam. Steam leaves the boiler and enters the turbine at 4 Mpa, 400°C. After expansion in the turbine to 400 kPa, the steam reheated to 400ºC and then expanded in the low pressure turbine to 10 kPa. Determine the cycle efficiency.
1.) A Steam power plant operates using the ideal Rankine Cycle where steam initially enters the turbine at 5.0 MPa and 400C then after expanding, it condenses at 7 kPa and exits as saturated liquid. Draw the TS diagram, find the thermal efficiency, and steam rate.