In a large printing operation, an employee using a clamp forklift truck that was transporting two waste- paper bales from the scrap paper area. One paper bale (~0.5 ton) was placed on top of another 1 ton bale; however, the top bale was not strapped to the bottom bale. As the forklift driver made a turn, he had to brake suddenly for a nearby pedestrian. The sudden stop and turn caused the top bale to fall off and strike the pedestrian. A review of the accident showed that the forklift operator was trained and certified, but the employee was in an area where pedestrians were prohibited according to plant safety rules. Write at least three suggested preventive measures to avoid the recurrence of said case accident.

In a large printing operation, an employee using a clamp forklift truck that was transporting two waste- paper bales from the scrap paper area. One paper bale (~0.5 ton) was placed on top of another 1 ton bale; however, the top bale was not strapped to the bottom bale. As the forklift driver made a turn, he had to brake suddenly for a nearby pedestrian. The sudden stop and turn caused the top bale to fall off and strike the pedestrian. A review of the accident showed that the forklift operator was trained and certified, but the employee was in an area where pedestrians were prohibited according to plant safety rules. Write at least three suggested preventive measures to avoid the recurrence of said case accident.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Place a check on the space corresponding to the observed physical properties. Metal brittle malleable ductile hard lustrous Mg Al Fe Sn Pb Cu
As far as is practicable it is a term that is normally used by safety & health officers. Examine the TRUE practicable meaning having regards according to Occupational Safety & Health Act 1994. The severity of the hazard or risk in question. The state of knowledge about the hazard or risk and any way of removing or mitigating the hazard or risk. II. I. I. The availability and suitability of ways to remove or mitigate the hazard or risk. IV. The cost of removing or mitigating the hazard or risk. A. В. I, II, III & IV C. O 1 & || D. I, II & II
Describe the framework of an application that would be capable of satisfying the criteria for automotive safety inspections.
Write a report about mechanical hazard: 1-potential hazards 2- prevention measures 3- type of Personal Protective Equipment Used. Dont write by hand.
As with other hazards, the first approach to dealing with workplace violence hazards should be through engineering controls. An example of this would be... As with other hazards, the first approach to dealing with workplace violence hazards should be through engineering controls. An example of this would be... video surviellance alarms bullet-proof barriers all of the above
GIVE A BRIEF SUMMARY ABOUT FIRE PROTECTION AND SUPPRESSION SYTEM IN A NARRATIVE FORM AND IT’S IMPORTANCE.
. The most common form of corrosion is oxidation. A) True B) False
28. List the 2 aspects that need to be considered when temperature testing for reliability
submit at least 10 hazard symbols and its description used in a workplace. identify the workplace where that symbol is being used.
13) Which one of the following is the Non destructive test a. Ultrasonic test b. Tensile test c. Brinell Hardness test d. Vickers hardness test
Less staff is required for breakdown maintenance which is carried out as fast as possible to bring a facility to safe operational condition. Select one: True False
Give at least 7 possible safety concerns and design solutions made by an industrial hygienist that may implement in the manufacturing industry to ensure proper industrial hygiene. Discuss each in 40 words per design solution.