If the discharge required for different crops is 0.4 cumecs in the field and the capacity factor and time factors are 0.8 and 0.5 respectively, then what is the design discharge of the distributary at its head?

If the discharge required for different crops is 0.4 cumecs in the field and the capacity factor and time factors are 0.8 and 0.5 respectively, then what is the design discharge of the distributary at its head?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Question:- Estimate the 7-day low flow with 50 year return period for ungauged abstraction point at…

A: Given:- The cross-sectional area of the catchment = 1750 km2 The time period = 7-day low flow with…

Q: If the discharge required for different crops grown in a field is 0.4 cumecs and the capacity and…

Q: stream with a flowrate of 10 m3/min and an MTBE concentration of 5 g/m3 flows into the first…

A: Inflow rate = Inflow concentration = Reservoir volume (V) = Time (t) = 1 hour = 60 minutes

Q: The initial rate of infiltration of a watershed is estimated as 2.1 in/hr, the final capacity is 0.2…

A: Given data in question Initial infiltration Final infiltration Time Constant Horton To find out…

Q: A peak flow of a flood hydrograph due 3 to a 6 hour storm is 470 m/s. The corresponding average…

Q: Is it possible to reduce the BOD of the effluent to maintain the DO above 7.0 mg/L at all downstream…

Q: 18. A treatment plant operates with two primary clarifiers, both 27.5 m in diameter and having 3 m…

Q: 1. Water Requirement of Crops The discharge capacity required at the outlet to irrigate 2600 ha of…

A: given- area A=2600 hakor depth=17 cmkor period=30 days

Q: The culturable command area for a distributary channel is 20,000 hectares. Wheat is grown in the…

A: Command area A=20,000 haIntensity of irrigation I=50%=0.50Kor period t=30 dayskor water depth D=120…

Q: A canal irrigates a portion of a culturable command area to grow sugarcane and wheat. The average…

Q: 2. The surface area of a reservoir is 17.2 square miles and is underlain by impervious strata. In…

A: Area of reservoir 17.2 sq mile 1 sq mile = 2.788 x 107 ft2 1 acre = 43560 ft2

Q: Q. If the discharge required for different crops grown in field is 0.5 cumec, the time factor and…

A: To find: Distributary design discharge

Q: During a storm event, the measured discharge of the river to a reservoir is 58 cu. m. per sec (cms).…

Q: Compute the discharge.

A: To find: Discharge

Q: 30 mi² reservoir is fed by two streams that carry an average discharge of 350,000 cfs and 20,000…

A: According to given data A 30 mi² reservoir is fed by two streams that carry an average discharge of…

Q: catchment's outlet has an annual discharge of 0.80 m^3/a. It's size is 250 km^2. The annual…

Q: The average surface flow of a reservoir in the month of June is 20 km². In the same month the avg.…

Q: Q- What is the discharge capacity required at the outlet to irrigate 2600 ha of sugarcane having a…

A: Given data- Area A=2600 ha,kor depth=17 cm,kor period=30 days. To Find- The discharge capacity Q.

Q: The community of San Antonio is located in the Caranavi Province, Bolivia. According to the 2005…

A: Introduction- Community of San Antonio -With 1,434,625 residents in 2020, it will be the…

Q: We are to determine the seepage (infiltration) in a 250 hectare reservoir. The reservoir has 0.50…

A: Given, A = 250 ha or 2500000 m2 Qin = 0.50 m3/s Qout = 0.30 m3/s Qi = 0.10 m3/s P = 20 mm or 0.02m…

Q: The Occoquan Reservoir watershed area is 623 sq mi. In a given month, the watershed received 5.5…

Q: here are currently 420 inhabitants in the small village of Pravino. The population is estimated to…

A: BOD5 loading generated in the year 2050 = Organic loading * population in 2050 = 45*10-3*940 =42.3…

Q: 3.2. For a CI gravity main (Fig. 3.2), calculate flow in a pipe of length 300 m and size 0.2 m. The…

A: Given:- The length of the pipe (L) = 300 m The diameter of the CI pipe (D) = 0.2 m The elevation…

Q: A peak flow of a flood hydrograph due 3 to a 6 hour storm is 470 m³/s. The corresponding average…

A: Given- 6 hour stormPeak flow Qf=470 m3/sAverage depth d=8 cm=0.80 mInfiltration loss I=0.25…

Q: In an irrigated field, the net irrigation requirement is 15 cm, the application efficiency is 80%…

Q: Two crops with the following data ,for the first crop A1= 40 cm, B1= 160 day and the area - be…

A: to find design discharge at outlet

Q: A small industrial plant discharges wastewater into a stream. The plant discharge has a flow rate of…

A: It is the amount of oxygen required by micro organisms to decompose organic matter under aerobic…

Q: river and the slaughterhouse wastewater is 28°C. Calculate the initial ultimate BOD after mixing.…

Q: The discharge capacity required at the outlet to irrigate 3000 ha of sugarcane having a kor depth of…

A: Given data- Area A=3000 ha, Kor depth d=173 mm=0.173 m, Kor period t=30 days, To Find- The discharge…

Q: A steady discharge of 1 cumec flows uniformly in a rectangular channel 1 m wide at a depth of 250…

Q: A water supply dam (Dam B) is fed by a nearby dam (Dam A) via a 2x3 m french drain (a gravel-filled…

A: Q = 18000L/day = 18m3/day V = 150m3 n (no of days till 150 m3 water last) =?

Q: i If the approximate water level in the distributary canal near the field is 35.20 m, then the…

Q: e initial rate of infiltration of a watershed is estimated as /hr, the final capacity is 0.2 in/hr,…

A: K=-0.4 per hr Time period=6hr

Q: Calculate the discharge if Cd 0.63 4 m 4.5 m 0.5 m. Fig. 8-7.

Q: Compute the 4-hr Snyder's synthetic unit hydrograph for a watershed with an area of 27.8 square…

A: The objective of the problem is to compute the 4-hour Snyder's synthetic unit hydrograph for a…

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

If the discharge required for different crops is 0.4 cumecs in the field and the capacity
factor and time factors are 0.8 and 0.5 respectively, then what is the design discharge
of the distributary at its head?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data-

VIEW

Step 2: Calculation

VIEW

Solution

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

If the Kuils River has a catchment area of 200 square kilometres and receives in a year 600 mm/year of rainfall, and the runoff from this catchment is 100 mm/year. Assuming that there is no loss to or gain of water from subsurface storage, the amount of evaporation isA) 400 mm/year, B) 500 mm/year, C) 300 mm/year D) 900 mm/year
There are currently 420 inhabitants in the small village of Pravino. The population is estimated to increase to 940 in thirty years. The current average peak flow is 1.2 L/s and is expected to increase to 2.14 L/s by 2050. The organic load is approximately 45 g BOD5/capita/day. The community is considering a free surface wetland or a lagoon to treat their wastewater. 1. Use the BOD loading to estimate the maximum surface area (in ha) required for a free surface wetland to serve the community by 2050 and remove BOD to 30 mg O2/L and TSS to 30 mg/L.
The town of Viracocha discharges 17,360 m³/day of treated wastewater into the Pachacamac Creek. The treated wastewater has a BOD5 of 12 mg/L and a BOD decay constant, k, of 0.12/day at 10 °C. Pachacamac Creek has a flow rate of 0.43 m³/s and an ultimate BOD, Lo, of 5 mg/L. The DO of the river is 6.5 mg/L and the DO of the wastewater is 1.0 mg/L. Compute the DO and the initial ultimate BOD, Lo, after mixing. Draw the Mass Balance Diagram.
What is the design discharge.
If annual water requirement for farm pond is 1.1 ha - m, the storage requirement allowing 43% losses is: Select one: a. 2.56 ha - m. b. 0.63 ha - m C 0.47 ha - m d. 1.95 ha - m.
9.4. A small farm reservoir behaves as two identical CFSTRs in series. Flow into the reservoir consists of runoff from pasture land having an average BOD, of 50 g/m³ and an average flow rate of 0.5 m³/s. Volume of the reservoir is 2.16 x 106 m³. If k = 0.2 d-¹ and k, = 0.35 d-¹ at 20°C, determine the dissolved-oxygen concentration if the water temperature is 20°C, the inflow is anaerobic, and steady-state conditions exist.
An action will release DO and BOD to a large low velocity river at a location where the existing conditions of the river have already been determined. Assess the impacted conditions (as a result of this action) at a location 10,000 m down-river from where the action releases the pollution. River: Q = 2 m³/s, A=1m², T = 15 degC, L = 5 mg/L, DO = DOsat Source1: Q = 0.5 m³/s, T = 25 degC, L = 100 mg/L, DO = 1 mg/L
initial capacity of 25,000 acre-ft if the average annual inflow is 40,000 acre-ft ,The useful life of the reservoir will terminate when 75 percent of its initial capacity is filled with sediment. Capacity inflow ratio for orange layer is Select one: O A. 0.468 O B. 0.625 O C. 0.38 O D. 0.58
A 40-year annual series of eak river discharges with the mean equal to 15,000 cfs and standard deviation equal to 7,500 cfs approximates a normal distribution. (1) Determine the discharge woth a return period of 10 years. (2) Determine the discharge with a return period of 20 years. (3) what is the return period rhay corresponds to a discharge of period of 20 years. (3) What is the return period that corresponds to discharge of 20,000 cfs? (4) What is the probability that a discharge equal to or greater than 20,000 cfs will occur during a 5-year period?