Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 10 bar, 1500 K and exit at 1.97 bar and 900 K. If the power output of the turbine is 55.4 kW, determine the rate of heat transfer from the turbine to its surroundings, in kW.

Hot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 10 bar, 1500 K and exit at 1.97 bar and 900 K. If the power output of the turbine is 55.4 kW, determine the rate of heat transfer from the turbine to its surroundings, in kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The entropy change of a system can be negative, but the entropy generation cannot.
Carbon dioxide gas is compressed at steady state from a pressure of 22 lbf/in2 and a temperature of 32oF to a pressure of 50 lbf/in2 and a temperature of 110oF. The gas enters the compressor with a velocity of 30 ft/s and exits with a velocity of 80 ft/s. The mass flow rate is 4000 lb/hr. The magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input. Use the ideal gas model with cp = 0.21 Btu/lb·oR and neglect potential energy effects.
The irreversibility associated with a student studying and watching a movie on television, each for two hours.
During a steady flow process, the pressure of the working substance drops from 100 to 20 psia, the velocity increases from 200 to 1200 fps, the internal energy decreases 25 Btu/lb., and the volume increases from 1 to 6 cu.ft/lb. If the heat transferred is zero, what is the work of 1 lb. of the substance in Btu?
The entropy change between two specified states is the same whether the process is reversible or irreversible.
Steam enters a turbine operating at steady state with a mass flow rate 1.28 kg/s. The power output of the turbine is 100kW. The inlet the enthalpy is given as 3177.2 KJ/kg. At the exit the pressure is 10 kPa and the quality is 90%. the change in kinetic energy between the inlet and outlet is negligible. calculate the heat transfer from the turbine to the surroundings
what is thermodynamic second law?
Two pounds of carbon dioxide (CO₂) as an ideal gas executes a Carnot power cycle while operating between thermal reservoirs at 470 and 100°F. The pressures at the initial and final states of the isothermal expansion are 400 and 200 lb/in², respectively. The specific heat ratio is k-1.24. Determine the thermal efficiency, the work for the isothermal expansion, in Btu, and the work for the adiabatic expansion, in Btu. Step 1 Your answer is correct. Determine the thermal efficiency. 7= 39.798 Hint Step 2 % * Your answer is incorrect. Determine the work during the isothermal expansion, in Btu. W23 29.971 Btu Attempts: 2 of 4 used
Refrigerant 134a enters a horizontal pipe operating at steady state at 40°C, 300 kPa, and a velocity of 25 m/s. At the exit, the temperature is 50°C and the pressure is 240 kPa. The pipe diameter is 0.055 m. Determine: (a) the mass flow rate of the refrigerant, in kg/s, (b) the velocity at the exit, in m/s, and (c) the rate of heat transfer between the pipe and its surroundings, in kW.
Carbon dioxide gas is compressed at a steady state from a pressure of 16 lbf/in2 and a temperature of 32oF to a pressure of 50 lbf/in2 and a temperature of 130oF. The gas enters the compressor with a velocity of 30 ft/s and exits with a velocity of 80 ft/s. The mass flow rate is 3500 lb/hr. The magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input. Use the ideal gas model with cp = 0.21 Btu/lb·oR and neglect potential energy effects. A.) Determine the flow area at the inlet, in ft2, B.) and the power required by the compressor to work, in horsepower. Show complete solutions.
Water vapor with a pressure of 160 bar and a temperature of 480°C enters a stable turbine with a volumetric flow of 800 m3/min. About 18% of the incoming mass flow exits a part of the turbine at a pressure of 5 bar, a temperature of 240°C and a velocity of 25 m/s. The rest comes out from another part of the turbine with a pressure of 0.06 bar, a quality of 94% and a speed of 400 m/s. Determine the diameters of each outlet channel in m.
13. During a reversible process, 2.09 kg/s of gas rejects 322.9 kJ/s of heat isothermally at 25.5°C. For this gas, cp = 2.14 kJ/kg K and c, 1.62 kJ/kg K. The initial pressure is 551.7 kPa. Determine the work steady flow of the process in hp if APE = 2.8 kJ/s and AKE = 6.2 kJ/s.