Ginko has two parallel plates which are uncharged. They are connected tothe RC circuit shown below. Ginko knows the following things abaout this RCcuircuit:The C1 capacitor is filled with air, The C1 capacitor has a plate area of6cm^2, The C1 capacitor has a plate seperation of 0.500mm, The C2capacitor is filled with with cardborad that has a dielectric constant of 3.7,The C2 capacitor has the same separation as C1, The C2 capacitor hastwice the plate area of C1, The switch remained at a for a long time andthen was throuwn to b. Figure out the final charge on each capacitor.bC₂C₁18.0 V2.00 knGinko

Given Data: Ginko has two parallel plates which are uncharged. They are connected tothe RC circuit…

Answered: Ginko has two parallel plates which are…

Similar questions

You have a circuit that has two capacitors that are in parallel to each otherin a circuit. The first capacitor is a parallel plate capacitor with a capacitance of 5.0pF and an area of 200 mm2. The second capacitor is also a plate capacitor with aseparation distance of 2 mm.(a) Draw a circuit showing just a battery and the two capacitors.(b) If the energy stored on the first capacitor is 10 µJ, what is the voltage drop acrossthat capacitor?(c) If the second capacitor can store twice as much energy as the first capacitor, whatis the area of the 2nd capacitor’s plates?(d) What is the distance between the plates for the first capacitor?
The figure below shows a simple RC circuit with a 1.50-uF capacitor, a 4.40-M0 resistor, a 9.00-V emf, and a switch. What are the following exactly 9.00 s after the switch is closed? (a) the charge on the capacitor pc (b) the current in the resistor (c) the rate at which the capacitor is storing energy uw (d) the rate at which the battery is delivering energy uw
What is the smallest capacitor needed in a computer power supply in order to produce at least 4.05 V for 0.17 s after the power goes off? Assume that the resistance of all the components of the computer motherboard is 6 Ohms and that the capacitor and motherboard are powered with a 5-Volt power supply. For my answer I got .01706 F which was wrong, When I tried it again I got .03497 F which was also wrong. Can you please help?
Imagine that we had a RC circuit with a 19.2 kilo-ohm resistor connected in parallel with a 16 kilo-ohm resistor and they were connected to two capacitors (404.2 uF, 350.1 uF) that are in series. What is the time constant of this circuit?
What multiple of the time constant t gives the time taken by an initially uncharged capacitor in an RC series circuit to be charged to 88.1% of its final charge? Number i Units
An RC circuit with components C = 4mF (mili-Farads), R1 = 2kN (kilo-Ohms) and R2 = 3kN is set as shown in the figure. The capacitor is initially charged to 16V. At t =0 the switch is thrown to position 1, at t = 4s the switch is turned to position 2. Which of the following expressions correctly gives the charge on the capacitor at t = 10s? О а. Q%3D (64птC)(1 — е 1/2)е 1/3 ОБ. Q3 (24C) (1 — е 3/2)е 1/3 Ос. Q%3 (32тC)e 1/2 R2 O d. Q= (64mC)e¬1 O e. Q = (32mC)e 6/5 R1 O f. Q3 (16тС)(1 — е 1/3)е 1/2 Оg. Q%3D (24mC)(1 — е 5/6) O h. Q = (16mC)e¬1/3
In RC Circuit, the current decreases exponentially with time as the capacitor charges. Explain the reason for this behavior.
can u explane
The figure below shows how a bleeder resistor (R = 246 kN) is used to discharge a capacitor (C = 63.7 µF) after an electronic device is shut off, allowing a person to work on the electronics with less risk of shock. Electronic circuit (a) What is the time constant? S (b) How long will it take to reduce the voltage on the capacitor to 0.100% of its full value once discharge begins? S (c) If the capacitor is charged to a voltage Vo through a 133 2 resistance, calculate the time it takes to rise to 0.865V, (this is about two time constants).
An accumulator with U1=150 V and negligible internal resistance is connected to a voltage divider as shown in the figure. a) How big will the voltage U2 be if no external load is connected? b) How large will U2 be if a load with resistance RL = 2250.0 Ω is connected between A and B? c) How large will U2 be if a load with resistance RL = 9000.0 Ω is connected between A and B? d) How big will the effect be in the load c)?
A simple RC circuit has a switch, a resistor (R), and a capacitor (C) all wired together in series. Assuming the switch is open initially and capacitor is fully charged to a potential V and holds a charge Qo, which of the following expressions describes the current through the circuit at time t=RC after the switch is closed? I = Ve R Selected Answer: V² Answers: I RC I = V R.e I = RC·e V %3D
An RC circuit has a 11 F capacitor and a 0.5 ogm resistor. If the initial charge stored on the capacitor is 20 C then at what time will the charge be 2.5 C?

SEE MORE QUESTIONS