Figure Q2 shows two tanks which contain the solvent used for plastic manufacturing. Tank A contains the cyclohexanol and Tank B contains the ethyl lactate. Calculate the pressure on the top of tank A, if the mercury in the manometer is at the level as shown, where h = 0.75 m. Take the specific gravities of cyclohexanol, mercury, and ethyl actate as, Scyclo = 0.953, Smercury = 13.55 and Sethyl = 1.03. B h = 4.5 m h=1.5m F0.75m -mercury FQ2: Schematic of two tanks A and B containing the plastic solvent

Figure Q2 shows two tanks which contain the solvent used for plastic manufacturing. Tank A contains the cyclohexanol and Tank B contains the ethyl lactate. Calculate the pressure on the top of tank A, if the mercury in the manometer is at the level as shown, where h = 0.75 m. Take the specific gravities of cyclohexanol, mercury, and ethyl actate as, Scyclo = 0.953, Smercury = 13.55 and Sethyl = 1.03. B h = 4.5 m h=1.5m F0.75m -mercury FQ2: Schematic of two tanks A and B containing the plastic solvent

Name: Figure Q2 shows two tanks which contain the solvent used for plastic
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Figure Q2 shows two tanks which contain the solvent used for plastic manufacturing.Tank A contains the cyclohexanol and Tank B contains the ethyl lactate. Calculate thepressure on the top of tank A, if the mercury in the manometer is at the level as

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider the tank shown (Figure 2), where the specific weight of the water is yw = 9800 N/m³ and the specific weight of molasses is ym = 1.4x104 N/m³. What is the pressure at the bottom of the tank if h1 = 3.4 m and h2 = 3.7 m. Water h2 Molasses
The end plates (isosceles triangles) of the trough shown to the right were designed to withstand a fluid force of 6400 lb. Assuming the density of water is 62.4 lb/ft³, how many cubic feet can the trough hold without exceeding this limitation? What is the value of h, the depth of water that exerts a fluid force of 6400 lb? What is the integral that gives the fluid force exerted on the end of the trough when filled with water to a depth of h? h Sody The maximum volume is ft³. (Round down to the nearest cubic foot.) The value of his (Round to two decimal places as needed.) (-3,14) (0,h) y (ft) (3,14) 14 y 3x x (ft) 0 End view of trough 14 ft 30 ft 6 ft → Dimensional view of trough
2. If 100 ft of atmospheric air at zero Fahrenheit temperature are compressed to a volume of 1 ftat a temperature of 200-F, what will be the pressure of the air in psi?
Due to the unavailability of mercury, a barometer was constructed using water in the closed column with a certain amount of oil on top to prevent the boiling of the water. Forstandard atmospheric pressure, what height of oil will be required and how high will the column of water be if the minimum pressure at the water-oil interface is to be 1 psia? Waterdensity is 62.4 lb/ft3; specific gravity of oil is 0.8
The gauge pressure in the air container illustrated in the figure is 80 kPa. Calculate the differential height h of the mercury column. Consider the atmospheric pressure to be zero.
2. A spherical balloon containing Oxygen (initially at sea level) has a diameter of 8in. If the uniform density of air is 0.07498lb/ft3 and that the pressure at sea level is 14.7psia, determine the new diameter (inch) of the balloon if it has been brought above sea level by 6000ft. Draw a figure or FBD that will support the problem. Explain each step by step formula.
QUESTION 3 Figure Q3 shows a cylinder with a diameter of 80 mm and a mass of 70 g. If it is placed in the tank, which contains oil and water. Calculate the height above the surface of the oil at which it will float if maintained in the vertical position. Take the density of oil as Po = 980 kg/m³. 80 mm- 50 mm Oil 150 mm Water Figure Q3: Schematic of a cylinder containing water and oil
The cylinder shown in the figure extends 8 ft into the paper. If the cylinder has the radius of 4 ft, compute the vertical component of the hydrostatic force of the oil on the cylinder. 90 Oil (s.g. = 0.85 ) 4 ft 90° 50°
The figure below shows a closed tank holding water and oil. Air pressure is P kPa is the air pressure above the oil. Calculate the pressure at the bottom of the container? What is the pressure at the bottom of the container? the pressure values:687
Due to unavailability of mercury, a barometer was constructed using water in the closed column with a certain amount of oil on top to prevent the boiling of the water. For standard atmospheric pressure, what height of oil will be required and how high will the column of water be if the minimum pressure at the water-oil interface is to be 1 psia? Water density is 62.4 lb/ft³; specific gravity of oil is 0.8.