Explain which water demand is used for the design of a pumping station betweeb the raw water reservoir and the water storage tank The water supply system at eThekwini municipality provides water to Durban at therates of 88 liters for average daily water demand, 150 liters for maximum daily waterdemand, and 210 liters for peak hourly water demand. The total head losses are 12 mat a flow of 101 liters.

Data given: Rates is given, so assuming the data is for per second Average daily water demand = 88…

Answered: Explain which water demand is used for…

Explain which water demand is used for the design of a pumping station betweeb the raw water reservoir and the water storage tank

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Assume reservoirs have a combined storage of 6.6 x 10e5 acre per feet assuming a constant inflow of…

A: Solution:- The initial volume of water in reservoirs = 6.6 x 105 acre-feet…

Q: Oil is conveyed on a 6” diameter pipe, sg=0.8 the velocity is 30ft/s. The pipe diameter narrows to…

Q: A water company wants to check that it will have sufficient water if there is a prolonged drought in…

Q: 1. The New York City water supply system is one of the most extensive municipal water systems in the…

A: Average rainfall= 47 in/year ςA= 1.969 mi2ςA=1.969×63360ςA=7.90×109 in2

Q: An oil refinery is located on the north bank of a straight river that is 2km wide. A pipeline is to…

A: Width of the river, B = 2 km The storage tanks are 6 km east of the refinery. The per km cost of…

Q: A community of 300 residents (water use per person = 130 gpd) is looking at using two sources for…

A: Optimal System Configuration****Calculations:**The Total Cost function is . Differentiate with…

Q: Explain why a pumped well results in a coneshaped, depressed, or drawn-down water table in the…

A: The water table will be lowered when there is a pumping of groundwater from the well occurs. When…

Q: Assuming a factor of safety of 2, what will be the water demand when water consumption per capita is…

A: given data water demand when water consumption per capita is 3.7 litres/day in a community of 6000…

Q: A water supply reservoir has an annual capacity of 27,000 acre-feet. The present population is…

Q: The diagram below shows a pipe network system. Two connecting reservoirs, 1 and 2, have water level…

Q: O A rectangular channel 1.30 wide carries 1.10 m/s of water at a depth of 0.85 m. If a 30-cm wide…

A: Equating specific energy of channel at both section to get elevation of water surface

Q: WTP Infitration Runot

A: A) The modification diagram is given below- If all the water is not tapped

Q: A local utility provider is investigating the purchase of private lake as depicted in the sketch…

A: Power of pump, Efficiency, Surface area, Depth, Storage time, Length, Coefficient, To find: The…

Q: The Bureau of Reclamation's Colorado River Basin Water Supply study of 2012 predicts that the water…

Q: The community of Enviro, USA, has found that its present ground water supply is inadequate to meet…

A: Po = 40,000 r = 2% = 0.02 Pn = Po (1 +r)n P10 (@1/1/2032) = 40,000 (1+0.02)10 = 48,760

Q: How do hydrological processes such as precipitation, evapotranspiration, and groundwater recharge…

Q: A Dam is constructed on a river to control its water for irrigation the surface area of the lake…

A: Here is the data given in the question. There are two types of flows associated to the reservoir,…

Q: EX. 7: Determined the capacity of a roof tank for the storage of water to serve a building having: 5…

A: We have to determine the value of capacity of a roof tank for storage of water to serve a building…

Q: Suppose your team is currently working on a dam design for your future project proposal. The…

A: Data given Dam top width = 384 m Dam bottom width = 206 m depth = 152 m (Full reservoir condition)…

Q: 27 years in advance. The current population is 25 x 103 capita with a daily water consumption of 21…

Q: Enumerate the methods used for estimating consumptive use of water. Explain in detail the one which…

A: The following methods are used for estimating consumptive use of water : 1- Penman method 2- Blaney…

Q: The following are some of the uses of surface reservoirs: • Hydroelectric power generation •…

A: Ro

Q: Discuss the hydrologic cycle in terms of water on land areas (that is, the source of land-area…

A: Hydrologic Cycle (Water Cycle):

Q: A town of 2 lakh population is getting water at the rate of 150 litres per capita per day from a…

A: A town of 2 lakh population is getting water at the rate of 150 liters per capita per day from a…

Q: Problem 1A 300-house residential development is proposed. Assume that each person uses 500 liters on…

A: Answer is 6 Lakh litres per day. Explanation is in the below box. If you have any doubts at anywhere…

Q: Calculate water application efficiency if 350 m3/minute of water is diverted to 25 hectares of field…

A: Given data- Discharge Q=350 m3/min, Area of field A=25 ha, Time t=5 hours, Water in root zone=0.25…

Q: ivil Engineering A catchment area of 150 miles2 with a planned development of 70%, a stream flow of…

A: Stream flow =0.9 ×106 gal per mile270% of stream flow is 70% of 0.9 ×106 gal per mile2=0.63 ×106 gal…

Q: Can I get a thorough step by step for the following question? A residential development of number…

Q: EX. 7: Determined the capacity of a roof tank for the storage of water to serve a building having: 5…

A: A house having5 Water closet10 wash basin5 sink5 showerFor bathing 40 liters For water is…

Q: In the year 2010 in X county had a total water withdrawl of 277.5 mgd The population of X county…

A: Estimating the future population number is important to determine the design capacity of the…

Q: to the USGS According (https://water.usgs.gov/watuse/data/2010/), the total water withdrawals…

A: Water supply for an area or a city is an important factor for different activities like cooking,…

Q: water quality discussion questions: Q1- explain how can natural factors contribute to the change in…

A: Water quality refers to the chemical, physical, and biological properties of water depending on its…

Q: of the Great Lakes, Lake Saint Clair has an average depth of 3.4 m, a surface area of 1,114 km², and…

A: Given: Lake Saint Clair: Average Depth=3.4 m Surface Area =1114 km2…

Q: A community needs everyday a discharge of water equal to 310.5 cubic meters per hour for its water…

A: given: DISCHARGE (Q)=310.5 m3/hrVelocity (V)=1.952 m/st=15 hour per dayQ=310.5×1524×3600=0.0539…

Q: Name four criteria by which the size of a reservoir is determined?

A: Reservoir- A reservoir is a man-made lake used to store water. A natural lake whose outflow has been…

Q: A gas chlorination system at a water treatment plant feeds 75 kg of chlorine per day into a daily…

A: To determine the chlorine residual. Given, Mass rate of chlorine feed=75 kg/day Flow rate of…

Q: What is the amount of wastewater generated per person per day if the current plant serves 1,000,000…

A: Given data, Total person's = 1,000,000 Average flow = 90 MGD

Q: If the reservoir and flow control valve represent a water treatment facility and the operators want…

A: A statement is given asIf the reservoir and flow control valve represent a water treatment facility…

Q: How to find the time to fill the reservoir

A: If the volume of the reservoir and rate of discharge is given.. Time to fill the reservoir can b…

Q: a) Describe the hydrologic cycle. Where is water found and stored on the planet Earth? How does it…

A: The material movement of water across the surface of the Earth is described by the hydrologic cycle,…

Q: Has the hydrologic cycle and its components explains how the structural intervention of human being…

A: Hydrologic Cycle- The total water of earth, excluding deep ground water, is in constant circulation…

Question

Explain which water demand is used for the design of a pumping station betweeb the raw water reservoir and the water storage tank

The water supply system at eThekwini municipality provides water to Durban at the
rates of 88 liters for average daily water demand, 150 liters for maximum daily water
demand, and 210 liters for peak hourly water demand. The total head losses are 12 m
at a flow of 101 liters.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

an oil refinery is located on the north bank of a straight river that is 2 km wide. a pipeline is to be constructed from the refinery to storage tanks located on the south bank of the river 4km east of the refinery. The cost of laying pipe is $400,000/km over land to a point P on the north bank and $800,000/km under the river to the tanks. To minimize the cost of the pipeline, how far (in KM) from the refinery should P be located?
A community of 300 residents (water use per person = 130 gpd) is looking at using two sources for water supply: 1. Nearby lake, 2. Local well- aquifer system. The cost functions are as follows (C₁ and C₂ represent costs are in arbitrary monetary units and V is the volume of water pumped per day, in gallons): Cost Functions: System 1: Lake C₁ = 410 + V 22000 System 2: Well-Aquifer V² 77x106 C₂: = V 3700 +40 The two systems have distinct water conveyance system characteristics. System efficiency parameter (n = Volume pumped Volume delivered accounts for pipe leak- age and related losses. Given 71 = 0.84 772 = 0.92 In all computations, the goal is to minimize total cost. (a) Compute the optimal system configuration (that is, how much wa- ter is withdrawn from each source) to meet the community water needs. (b) A population projection for the year 2025 puts the population of this community at 400. Compute the system configuration to meet the pro- jected demand. (c) Through a conversation…
A new water supply main is being planned for a new city of 2 million population and average per capita water demand of 300 litres per day. The water source is located 50 km from the newly planned city at similar elevation as the city. Water is proposed to be conveyed using two number of 100 cm diameter cast iron pipeline in parallel. Assume water density of 1,000 kg/m3 and viscosity of 1.0 x 10-3 kg/m-s. Determine the following: a. The total head loss (in m) during this conveyance of water in each pipeline. Use Colebrook equation to calculate frictional factor. b. The total electrical power (in MW for both pipeline) required to pump this water over 50 km distance assuming combined pump-motor efficiency of 70%. c. If the maximum pressure allowed in the pipeline is 1 MPa, how many pump stations (minimum numbers) are required along the 50 km distance pipeline instead of just one large pump. d. If the two pipes are replaced by just one pipe, what should be the minimum diameter of the pipe…
Design a water treatment plant for a town with a 2020 population of 25000 persons, average population growth rate of 1.5% annually and average PCWC of 120 liters per day. The treatment plant will have a design life of 20 years and expected to start operation in 2024 and will be designed to treat 1.3 times the average water requirement. The source of water supply is a river and the water treatment plant must adequately remove very fine suspended solids and microorganspisms.
Villagers living downstream a river that is fed by a wastewater treatment plant are concerned about the cleanliness of river water they use for irrigating their gardens. Explain THREE main steps the water goes through in a wastewater treatment plant and give at least THREE criteria used to measure the quality of the treated water to deem the water safe for activities such as irrigation.
Managing water for the environment, or environmental flows, is considered important in maintaining various ecosystem services and functions. Ecosystem health is impaired by the hydrologic alteration and regulation of river flows for various human needs. How is the environment affected by water use in (a) agriculture (b) urban water use (c) hydropower and (d) industries? Explain in brief.
If you have 1.7 inches of excess water and a watershed area of 15 square miles, what is the total volume that winds up in the stream in cubic feet?
Question 2 5 points The following is relevant water demand information for the town of Goodborough for the design year of 2050: Design Population = 10000 Annual average per capita water demand = 250 L/d Assume a water supply system of Type C is considered for the town, as shown below: Elevated Storage WTP HLP LP Smce Community camouners) Assuming that BOTH equalization storage AND fire storage provided are sufficient, determine the following to meet the water needs of the community in the design year, as per Ontario guidelines A) Design capacity of the WTP (in ML/d; ignore losses) B) Design capacity of Conduit III (in ML/d)
Which of the following best describes the historical order of development for transporation infrastructure in Canada? 1.Railway 2.Natural Waterways 3.Railways 4.Roads 1.Natural Waterways 2.Canal Systems 3.Railways 4.Roads 1.Natural Waterways 2.Roads 3.Railways 4.Canals 1.Natural Waterways 2.Railway 3.Canal Systems 4.Roads