Example: Beam AB is subjected to a uniform load of 200 N /m and is supported at B by postBC, Fig. a. If the coefficients of static friction at B and C are UB = 0.2 and µc= 0.5, determine theforce P needed to pull the post out from under the beam. Neglect the weight of the members andthe thickness of the beam.200 N/mA4 m0.75 m10.25 mC(a)

Answered: Image /qna-images/answer/c50321b7-44be-409d-a46f-705285e720b9.jpg

Example: Beam AB is subjected to a uniform load of 200N /m and is supported at B by post BC, Fig. a. If the coefficients of static friction at B and C are µB = 0.2 and µc=0.5, determine the force P needed to pull the post out from under the beam. Neglect the weight of the members and the thickness of the beam. 200 N/m A B [0.75 4 m 0.75 m l0.25 m

Example: Beam AB is subjected to a uniform load of 200N /m and is supported at B by post BC, Fig. a. If the coefficients of static friction at B and C are µB = 0.2 and µc=0.5, determine the force P needed to pull the post out from under the beam. Neglect the weight of the members and the thickness of the beam. 200 N/m A B [0.75 4 m 0.75 m l0.25 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Flexure stress *Please answer in complete solution and draw the shear and moment diagram, Solve the Area moment of inertia*
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 13700 ksi] rods, and a solid steel [E = 32600 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.84 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.5 in. Assume L1=37 in and L2=66 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 27 kips is applied. (2) (1) L2 (1) L1 A P
Question Three The three-bar truss ABC shown in the figure part a has a span L = 3 m and is constructed of steel pipes having cross-sectional area A = 3900 mm² and modulus of elasticity E = 200 GPa. Identical loads P act both vertically and horizontally at joint C, as shown. (a) If P=475 kN, what is the horizontal displacement of joint B? (b) What is the maximum permissible load value Pmax if the displacement of joint B is limited to 1.5 mm? P A 45° 45° B L (a)
Question 5) The horizantal cantilever rigid beam AB has no mass and it is supported by an elastic rod at point C. The modulus of elasticity of the BC rod is E=200 GPa with cross-sectional area of 4=200 mm'. Calculate the magnitude of the distributed load q acting on the system so that the BC rod can be elongated by 2 mm. FEA 3m rigid B A 2m 1.5m
Problem 8.45 The three bars have a weight of WA = 20 lb, WB = 40 lb, and Wc = 60 lb, respectively. (Figure 1) Figure 1 of 1 > CPCB=0.5 BMBA=0.3 A MAD=0.2 P D Part A If the coefficients of static friction at the surfaces of contact are as shown, determine the smallest horizontal force P needed to move block A. Express your answer to three significant figures and include the appropriate units. μA P= Value Submit Units My Answers Give Up ? Provide Feedback Continue
Use Use x = 137 y = 37 a = 6 b = 8 c = 1 answer number 20 and 21 only
The compound beam is subjected to a uniform dead load of 380 lb/ft and a uniform live load of 285 lb/ft. Assume B is a pin and C is a roller. Follow the sign convention. (Figure 1) Figure A 5 ft 00 B 5 ft D 5 ft C 1 of 1 Part A Determine the negative bending moment at A with the maximum magnitude. Express your answer using three significant figures. ΠΑΣΦ (MA)max(-) = Submit Part B (VD) max(+) Request Answer Determine the maximum positive shear at D. Express your answer using three significant figures. Submit = ΑΣΦ ↓↑ vec Request Answer vec ? ? k.ft lb
A simply supported steel beam is loaded with a uniformly distributed load and a torque. The beam has a U-shaped cross section, as shown. Determine the maximum normal compressive and tensile stresses caused by the acting loads. Express your answer in kgf/cm2 and in MPa.
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 14800 ksi] rods, and a solid steel [E = 32200 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.68 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.54 in. Assume L1=50 in and L2=81 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 21 kips is applied. (2) (1) L2 (1) |L1 B P.
Use x = 137 y = 37 a = 6 b = 8 c = 1
Find the maximum moment of the given load train at point n on the beam given in the figure?
A rectangular beam is supported at both ends. It carries two concentrated load of 190KN, a clockwise moment of 160KN- m, and a uniformly distributed load "w". The modulus of elasticity of the beam is 150GPA. Solve the following if the reaction at point B is 309.63888888889KN, upward. USE ANY МЕТНOD BEAM DIMENSION: Width = 130mm , %3D Height = 460mm %3D NOTE: b = 4.2m ; Also, DON'T FORGET TO TYPE DOWN THE CORRECT UNITS (IF NEEDED) P W M 1m 1m 1m Determine the deflection at midspan