Example (2-3):A centrifugal pump is installed to supply water from areservoir to a tank which is at a vertical height of 12 m above it. The diameter of the suction pipe is 300 mm and it is 6 m long. At the end of the suction pipe which extends under the water level in the reservoir, are fitted a foot valves and strainer. There is one 90° bend on the side of suction. The discharge pipe is 250 mm diameter and 135 m long. It is fitted with a gate valve and two medium radius 90°- elbows. Find the HP of the pump to discharge 85 L/s of water considering all losses of head in pipe fitting. The overall efficiency of pump is 70%. Find also the size of driving motor. Assume; Kinematic viscosity of water v = 1.146 * 10-6 m²/s %3D Loss of head due to friction in pipes Hf 4fL v2 d 2g 0.21 /here; 4f = 0.0032 + R0.237

Example (2-3):A centrifugal pump is installed to supply water from areservoir to a tank which is at a vertical height of 12 m above it. The diameter of the suction pipe is 300 mm and it is 6 m long. At the end of the suction pipe which extends under the water level in the reservoir, are fitted a foot valves and strainer. There is one 90° bend on the side of suction. The discharge pipe is 250 mm diameter and 135 m long. It is fitted with a gate valve and two medium radius 90°- elbows. Find the HP of the pump to discharge 85 L/s of water considering all losses of head in pipe fitting. The overall efficiency of pump is 70%. Find also the size of driving motor. Assume; Kinematic viscosity of water v = 1.146 * 10-6 m²/s %3D Loss of head due to friction in pipes Hf 4fL v2 d 2g 0.21 /here; 4f = 0.0032 + R0.237

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The bore on a cylinder of a compressor is 2 inches. The stroke is 3 inches.What is the displacement of the compressor?
A punch press has punches forty (40) circles that are 2 inches in diameter through medium carbon steel that is 0.125” thick. If six hydraulic cylinders are used to achieve this force, what diameter cylinders are required if the pump has a maximum continuous operating pressure of 3150 psi?
Choose the symbol for check valve. Select one: a. Ob. C. O d.
Compare Mechanical Hydraulic and Electrical Hydraulic?
True or False. Frome Poiseuille's law, in order to maintain a constant flow rate, the pressure difference across a tube has to decrease when the viscosity of the fluid increases.
5. A1/2 in. ball check valve has a hydraulic fluid, with a specific gravity of 0.85 and a kinematic viscosity of 20 cSt, flowing through it. a. What is the fluid resistance of the valve? b. What is the pressure drop when the flow rate through the valve is 40 gal'min?
thank you can u plz solve f&g now
Question An isolated tank contains M amount of water. A pipe connected to the tank with a pump, delivering the water in a close circle back to the tank through the atmosphere. Assuming the water temperature distribution is equal in the tank at the beginning, Create an equation of the temperature in the tank relative to the time, Given; water flow through the pipe 3M/h (three times the water tank per hour) Initial temperature at the tank T₁ Atmosphere temperature To Length of the pipe L ho-convective heat transfer coefficient of the air hw-convective heat transfer coefficient of the water k-pipe thermal conductivity (W/m-K) d-pipe diameter can use any other obvious data that is needed and can be reached easily online, Please explain every step, equation and assumption that is used.
Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm) A. 0.01 L.S B. 0.087 L.S C. L.S D. L.S 0.087
The type of impeller used in the blower experiment is a. Open type straight vanes b. closed type of vanes c. forward type vane d. Backward type vane
Question 1 • What is the expected number of failures among 600 pumps during 100 hours of operation, if each pump has a hazard rate function h(t) = 10-7t² (where the unit of t is hour)?
Q4